Today's Message Index:
----------------------
1. 12:38 AM - Re: Covered trailer (nigel henry)
2. 04:06 AM - Parts for Sale (G-IANI)
3. 04:25 AM - Re: Type of Paint for my Europa (PHILLIPS I)
4. 04:45 AM - Garmin GTX 320 (Mike Gamble)
5. 07:02 AM - Re: Type of Paint for my Europa (GRAHAM SINGLETON)
6. 08:23 AM - Re: Seats (Jeff B)
7. 02:06 PM - Re: MOD 42 COLD AIR PLENUM CHAMBER for CLASSIC needed (Gavin & Anne)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I have a Westfield 7 Half finished in the Bedroom ! Nigel
From: kjburns@btinternet.com
Subject: Re: Europa-List: Covered trailer
Nigel=2C
Need trailer to re-organise my wee factory=2C
m=2C lady returns after Christmas and I want to reduce the shock of Epoxy
warming next to heaters=2C Glasscloth snuggled against radiators and boxes
of bits being sorted in to groups on the coffee table using curry tuppaware
recycling=2C(back to work now after the food poisoning) removing the wing
s from the living room should do it!
Supose I could just fit a high level TV=2Cs so she can see it over wings!
Finished insulating garage=2C now lets see who=2Cs finished with their spac
e heaters?
Kevin
From: nigel henry <gbupa@hotmail.com>
Sent: Thursday=2C 23 December=2C 2010 23:47:22
Subject: RE: Europa-List: Covered trailer
I think Kevin is opening a factory ! lol Merry Christmas xxx
> Date: Thu=2C 23 Dec 2010 22:32:20 +0000
> From: kjburns@btinternet.com
> Subject: Europa-List: Covered trailer
> To: europa-list@matronics.com
>
>
> Hi all and merry Christmas=2C
>
> I would like more space in my workshop=2C so I am looking to buy a covere
d trailer
> to store wings etc while working on other parts=2C Europa special traile
r would
> be perfect =2C failing that if anyone is disposing of any suitable storag
e trailer
> I would be interested=2C or if you are not using yours over winter could
I hire it
> ?
>
> Many thanks
>
> Ke======================
&g============
>
>
>
ww" rel=nofollow target=_blank>http://www.matronics.com/Navigator?Europ
a-==========
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Note from Nigel Charles:-
I am in the process of a panel upgrade on my RV8 and have some instruments
I need to pass on. I thought some of them might be of interest to Europa
owners. I intend donating any money raised to the 'Help for Heroes' charity
so I haven't priced any items. I just ask potential purchasers offer as
generously as they feel appropriate. As a guideline it would be reasonable
to expect at least 25% of the new price for any given item.
Instruments for Sale
Becker transponder ATC 4401-1(with antenna)
GPS Bendix/King Skymap IIIc(with panel rack and antenna)
Fuel Contents (Electronics International LED analogue & LCD digital)
Standby compass
ASI
VSI
DI (air driven)
AH (air driven)
Suction gauge
T&S (electric)
RPM (with sender drive)
Manifold pressure
Oil Pressure
Oil Temperature
EGT
Ammeter
MAC trim indicator
Regards Nigel Charles
If anyone is interested please contact Nigel on [nigelcharles@talktalk.net]
Ian Rickard G-IANI XS Trigear, 300hours
Europa Club Mods Specialist
e-mail g-iani@ntlworld.com
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Type of Paint for my Europa |
Hi John
I used PPG base white two pack acrylic, Very important to have a full mask
with air supply
if you decide to do your own painting,
Th hardener come in different speeds for differing temps,
Ivor
On 23 December 2010 14:30, Steade <steade@btinternet.com> wrote:
> John
>
> I used Aerodur white topcoat and Barrier Primer supplied by "Pexa,
> Springwood Business Park, Burrwood Way, Holywell Green, West Yorkshire, HX4
> 9BJ tel 01422 314400
>
>
> Regards
>
> David Steade
>
> *
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Thanks gentlemen I got the manual (several times) - more than happy.
Happy Christmas to all.
Mike
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Mike Gamble
Sent: 23 December 2010 14:56
Subject: Europa-List: Garmin GTX 320
Does anyone have a copy of the Installation Manual for the Garmin GTX 320
transponder. I cannot find one from the usual sources.
Thanks.
Mike
G-CFMP
Mono
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Type of Paint for my Europa |
It's always best (imho) to use Base White. There are so many obscure shades
of =0Awhite that it's very hard to match for a repair. Stick with base whi
te which =0Alooks whiter anyway,=0AI use PPG too.=0AGraham=0A=0A=0A=0A=0A__
______________________________=0AFrom: PHILLIPS I <ivor.phillips@ntlworld.c
om>=0ATo: europa-list@matronics.com=0ASent: Friday, 24 December, 2010 12:17
:52=0ASubject: Re: Europa-List: Type of Paint for my Europa=0A=0A=0AHi John
=0AI used PPG base white two pack acrylic, Very important to have a full ma
sk with =0Aair supply=0Aif you decide to do your own painting,=0ATh hardene
r come in different speeds for differing temps,=0A =0AIvor=0A=0AOn 23 Decem
ber 2010 14:30, Steade <steade@btinternet.com> wrote:=0A=0AJohn=0A> =0A>I u
sed Aerodur white topcoat and Barrier Primer supplied by "Pexa, Springwood
=0A>Business Park, Burrwood Way, Holywell Green, West Yorkshire, HX4 9BJ te
l 01422 =0A>314400=0A> =0A> =0A>Regards=0A> =0A>David Steade=0A> "_blank">
www.aeroelectric.com .com/" target="_blank">www.buildersbooks.com =0A>=
"_blank">www.homebuilthelp.com _blank">http://www.matronics.com/contributio
n =0A>arget="_blank">http://www.matronics.com/Navigator?Europa-List =0A>t
================== =0A
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Jim,
As you know, I sewed my own seats for Baby Blue, however, if you want
fast, just to get flying, just wrap a pillow case around some dense
foam, that you've carved to roughly fit the seat pans.
Good luck,
Jeff - Baby Blue
On 12/23/2010 6:32 PM, jimpuglise@comcast.net wrote:
> I am at the point of installing seats. I notice that Wicks has a seat
> available for a reasonable price. Has anyone used any of the
> pre-manufactured seats? If so, which ones and how pleased are you? I
> have talked to a couple of people who can make them, and have seen
> several posts from people who have carved their own. If I do buy one, I
> may want to replace it with a custom fit seat in the future.
>
> I have used Zolotone on the interior, so am fairly close to flying. I
> primarily want something fast and easy.
>
> Jim Puglise
>
> A-283, XS - painted and cleaning up lots of details
>
> *
>
> *
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | MOD 42 COLD AIR PLENUM CHAMBER for CLASSIC needed |
Hi Chris
Not sure if you received my reply, I have a Classic plenum which you can
have for the cost of postage, the filter you would be able to get from the K
& N website, (not sure of the part No but someone will know) and I'm sure
someone will be able to supply you with the splash moulding to position the
intake
Contact me off list.... gavanne@iconz.co.nz
Merry Xmas
Gavin
_____
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Christoph Both
Sent: Tuesday, 30 November 2010 3:26 a.m.
Subject: RE: Europa-List: MOD 42 COLD AIR PLENUM CHAMBER for CLASSIC needed
Hello,
Would anyone have a complete MOD 42 kit, 912 Rotax Plenum chamber for the
CLASSIC, and not needed any more (perhaps you upgraded to XS cowing)
available for purchase?
Thanks,
Christoph Both
#223
Nova Scotia, Canada
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|