---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Fri 03/11/11: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:27 AM - Re: flap drive pin engagement (PHILLIPS I) 2. 03:48 AM - Re: flap drive pin engagement (david park) 3. 06:26 PM - Re: flap drive pin engagement (JR Gowing) ________________________________ Message 1 _____________________________________ Time: 01:27:40 AM PST US Subject: Re: Europa-List: flap drive pin engagement From: PHILLIPS I Hi Bob the Service Bulletin is SB 16 find PDF file attached Ivor On 10 March 2011 23:57, JR Gowing wrote: > David Park > > Would you please quote what Service Bulletin No refers, and your kit > number so we can see if this concerns other builders? > > > JR (bob) Gowing Kit no 327 in Oz > > Do not archive > > *From:* owner-europa-list-server@matronics.com [mailto: > owner-europa-list-server@matronics.com] *On Behalf Of *david park > *Sent:* Wednesday, 9 March 2011 1:37 AM > *To:* europa-list@matronics.com > *Subject:* RE: Europa-List: flap drive pin engagement > > > Replaced my bearing housings with heat gun, and turned bearing with mole > and levered with screwdriver on edge - no problem. > Dave G-LDVO > > > Subject: Europa-List: flap drive pin engagement > > From: keesdebussy@hotmail.com > > Date: Tue, 8 Mar 2011 05:07:30 -0800 > > To: europa-list@matronics.com > > > keesdebussy@hotmail.com> > > > > In my case the flap drive pins engagement comply with the service > bulletin on that matter but at the portside it is at the limit. So I decide > the bring it well within the limits and I purchased the special bearing > housing from Europa Aircraft. > > > > I have now a problem to remove the original housing and bearing from the > x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / > 1110 degr. F) but I could not get any movement of the bearing housing. > > > > Has anybody experience in removeing the bearing housing from the X-tube ? > Any ideas are welcome. > > > > Kees de Bussy > > PH-SBR > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=333147#333147 > > > > > > > > > > > >=============== > > > > > > > > * * > > * * > > ** > > ** > > ** > > ** > > ** > > *http://www.matronics.com/Navigator?Europa-List* > > ** > > ** > > *http://forums.matronics.com* > > ** > > ** > > ** > > ** > > *http://www.matronics.com/contribution* > > ** > > * * > > ------------------------------ > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1204 / 03/09/11 > > * > > * > > ________________________________ Message 2 _____________________________________ Time: 03:48:10 AM PST US From: david park Subject: RE: Europa-List: flap drive pin engagement Bob=2C Someone else has quoted the SB No. I changed mine during build when I had to adjust length of cross tube. Dave From: jrgowing@bigpond.net.au Subject: RE: Europa-List: flap drive pin engagement David Park Would you please quote what Service Bulletin No refers=2C and your kit nu mber so we can see if this concerns other builders? JR (bob) Gowing Kit no 327 in Oz Do not archive From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-serv er@matronics.com] On Behalf Of david park Sent: Wednesday=2C 9 March 2011 1:37 AM Subject: RE: Europa-List: flap drive pin engagement Replaced my bearing housings with heat gun=2C and turned bearing with mole and levered with screwdriver on edge - no problem. Dave G-LDVO > Subject: Europa-List: flap drive pin engagement > From: keesdebussy@hotmail.com > Date: Tue=2C 8 Mar 2011 05:07:30 -0800 > To: europa-list@matronics.com > om> > > In my case the flap drive pins engagement comply with the service bulleti n on that matter but at the portside it is at the limit. So I decide the br ing it well within the limits and I purchased the special bearing housing f rom Europa Aircraft. > > I have now a problem to remove the original housing and bearing from the x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / 1110 degr. F) but I could not get any movement of the bearing housing. > > Has anybody experience in removeing the bearing housing from the X-tube ? Any ideas are welcome. > > Kees de Bussy > PH-SBR > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=333147#333147 > > > > > >=============== > > > http://www.matronics.com/Navigator?Europa-Listhttp://forums.matronics.c omhttp://www.matronics.com/contribution No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1204 / 03/09/11 ________________________________ Message 3 _____________________________________ Time: 06:26:02 PM PST US From: "JR Gowing" Subject: RE: Europa-List: flap drive pin engagement Thank you Ivor! Now I can find it in my records. I remembered the issue from what seems like a long time ago. I wlll now be able to put my finger on what I did. Bob Gowing kit 327 in Oz Do not archive From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of PHILLIPS I Sent: Friday, 11 March 2011 8:24 PM Subject: Re: Europa-List: flap drive pin engagement Hi Bob the Service Bulletin is SB 16 find PDF file attached Ivor On 10 March 2011 23:57, JR Gowing wrote: David Park Would you please quote what Service Bulletin No refers, and your kit number so we can see if this concerns other builders? JR (bob) Gowing Kit no 327 in Oz Do not archive From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of david park Sent: Wednesday, 9 March 2011 1:37 AM Subject: RE: Europa-List: flap drive pin engagement Replaced my bearing housings with heat gun, and turned bearing with mole and levered with screwdriver on edge - no problem. Dave G-LDVO > Subject: Europa-List: flap drive pin engagement > From: keesdebussy@hotmail.com > Date: Tue, 8 Mar 2011 05:07:30 -0800 > To: europa-list@matronics.com > > > In my case the flap drive pins engagement comply with the service bulletin on that matter but at the portside it is at the limit. So I decide the bring it well within the limits and I purchased the special bearing housing from Europa Aircraft. > > I have now a problem to remove the original housing and bearing from the x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / 1110 degr. F) but I could not get any movement of the bearing housing. > > Has anybody experience in removeing the bearing housing from the X-tube ? Any ideas are welcome. > > Kees de Bussy > PH-SBR > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=333147#333147 > > > > > >=============== > > > http://www.matronics.com/Navigator?Europa-List http://forums.matronics.com http://www.matronics.com/contribution _____ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1204 / 03/09/11 arget="_blank">http://www.matronics.com/Navigator?Europa-List ttp://forums.matronics.com _blank">http://www.matronics.com/contribution _____ No virus found in this message. Checked by AVG - www.avg.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.