---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 03/15/11: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:15 AM - test3 (pjeffers@talktalk.net) 2. 11:06 AM - DOTH Thu.17th Cambridge (Paddy Clarke) 3. 01:19 PM - Re: DOTH Thu.17th Cambridge (Bob Harrison) 4. 02:46 PM - Re: DOTH Thu.17th Cambridge (Richard Iddon) 5. 02:51 PM - Re: quick connect disaster area (neveyre@aol.co.uk) 6. 09:21 PM - Purging a Rotax with an oil thermostat. (rparigoris) ________________________________ Message 1 _____________________________________ Time: 05:15:00 AM PST US Subject: Europa-List: test3 From: pjeffers@talktalk.net =0A=0A=0Atest 3=0A ________________________________ Message 2 _____________________________________ Time: 11:06:28 AM PST US From: Paddy Clarke Subject: Europa-List: DOTH Thu.17th Cambridge Hi Folks, After 4 months, my aircraft has at last emerged from its winter hibernation and I'm finally ready for a DOTH. I suggest Cambridge on Thursday, voucher in Flyer - 1200ish as ever. All the Best, Paddy Paddy Clarke Europa G-KIMM ________________________________ Message 3 _____________________________________ Time: 01:19:26 PM PST US From: "Bob Harrison" Subject: RE: Europa-List: DOTH Thu.17th Cambridge Sorry Paddy, I have just a small tweek to do on G-PTAG but had it out a week ago. It's good to fly again.....Thursday I'm taking a big piece of kit to Caterpillar at Leicester. Regards Bob H -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Paddy Clarke Sent: 15 March 2011 18:03 Subject: Europa-List: DOTH Thu.17th Cambridge Hi Folks, After 4 months, my aircraft has at last emerged from its winter hibernation and I'm finally ready for a DOTH. I suggest Cambridge on Thursday, voucher in Flyer - 1200ish as ever. All the Best, Paddy Paddy Clarke Europa G-KIMM ________________________________ Message 4 _____________________________________ Time: 02:46:53 PM PST US Subject: Re: Europa-List: DOTH Thu.17th Cambridge From: Richard Iddon Damn, After 4 months, mine is just going back into mothballs as I am heading back to the antipodes. Have a good summer. See you next winter all being well. Richard Iddon G-RIXS On 15 Mar 2011, at 18:02, Paddy Clarke wrote: > > Hi Folks, > After 4 months, my aircraft has at last emerged from its winter hibernation and I'm finally ready for a DOTH. I suggest Cambridge on Thursday, voucher in Flyer - 1200ish as ever. > All the Best, Paddy > Paddy Clarke > Europa G-KIMM > > > > > > > > ________________________________ Message 5 _____________________________________ Time: 02:51:40 PM PST US Subject: Re: Europa-List: quick connect disaster area From: neveyre@aol.co.uk Will, Get your ruler out...... The spar cap [ glass rovings] should be about 42mm deep at the point direct ly above the Q/C hole,[ from the top of the spar to the wood] the hole itse lf should be about 61mm from the top. The quality control of the placement of rovings was a bit suspect at one ti me, I had to inspect for minimum cap material before they went out. Many we re too thick, you may strike lucky if the one you have is too deep [ as in you have 42mm above the top of the hole you have drilled ?] and what you ha ve is rovings where wood should be ? There will always be a fix, so don't fret too much. Cheers, Nev. -----Original Message----- From: William Daniell Sent: Mon, 14 Mar 2011 2:38 Subject: Europa-List: quick connect disaster area Fred ood point well made! erewith pic of disaster area :-( Ill -----Original Message----- rom: william.daniell@longportsecurity.com mailto:william.daniell@longportsecurity.com] ent: 13 March, 2011 20:15 o: William Daniell ubject: IMG00300-20110313-2013.jpg illiam Daniell ________________________________ Message 6 _____________________________________ Time: 09:21:49 PM PST US Subject: Europa-List: Purging a Rotax with an oil thermostat. From: "rparigoris" Hi group Here's an interesting post from a guy on the Rotax group about purging a 912S with an oil thermostat: http://www.europaowners.org/forums/gallery2.php?g2_itemId=87494 I have a 914 and will be installing a Mocal oil thermostat. Ron Parigoris Read this topic online here: http://forums.matronics.com/viewtopic.php?p=334045#334045 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.