Today's Message Index:
----------------------
1. 04:37 AM - Re: Europa Classic cooling hoses (Roger Bull)
2. 01:10 PM - Ampreg crytalised (graeme bird)
3. 06:09 PM - Monowheel Brakes (Martin Tuck)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Europa Classic cooling hoses |
Hi Bruno,
The factory does have stock of the hoses Walter needs. There were
plenty when I retired, and I checked with Karen yesterday that they are
still available.
>From memory the part numbers are C01 and C02 (C03 is an oil hose).
Hope that helps.
Regards,
Roger
----- Original Message -----
From: UVTReith
To: europa-list@matronics.com
Sent: Thursday, March 17, 2011 10:27 AM
Subject: Europa-List: Europa Classic cooling hoses
Dear Europa family,
Walter Swoboda needs for his Classic Monowheel with Rotax 912 new
cooling hoses, especially the 180=B0 bended outlet hose. But better
would be to replace the inlet hose too.
EA/UK do not have them. Some weeks ago there was a discussion and a
result, where you can get these hoses - when I remember right.
Please help out.
Best Regards,
Bruno Reith / Europa Aircraft Germany
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Ampreg crytalised |
the main resin of my Ampreg 21 has gone slightly crystallized and I am wondering
if its ok to use?
Its not old and its not been frozen or overheated should be in date as I only received
it late last year.
--------
Graeme Bird
G-UMPY
Mono Classic/XS FWFD 912ULS/Warp drive FP
Build nearing completion
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=334324#334324
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Monowheel Brakes |
Hi Folks,
My brake pads are more than 10 years old and I think are probably hard
and shiny - anyway, less effective than they used to be so I think it is
time I replaced them.
Does anyone know the Aircraft Spruce numbers for the pads?
Also, I want to replace the monowheel inner tube as I feel I'm living
on borrowed time (also 10 years old). It has a 90 deg turn on the valve
as I recall. Anyone have the part number for that too?
Regards,
Martin Tuck
Europa N152MT
Wichita, Kansas
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|