Today's Message Index:
----------------------
1. 09:03 AM - Re: corrosion on pitch torque tube (Andrew Sarangan)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: corrosion on pitch torque tube |
I just received the mod 75 kit (autopilot altitude hold) which
included a new CS10 tube. This tube is indeed different from the one I
got back in 2000. It is a golden color, and the weld joint has been
spray coated with what looks like zinc chromate paint.
On Tue, Sep 6, 2011 at 4:55 AM, G-IANI <g-iani@ntlworld.com> wrote:
>
> Andrew
>
> If your CS10 is dark brown/black then it will not have been plated. The
> steel components were shipped with this oil finish up to about 2002/3 when
> Europa started plating them (the gold finish).
>
> The oil finish will prevent some corrosion but a better solution is to clean
> and paint the component. As your end caps are already in place try and
> ensure you do not get any acid cleaner inside the tube. This will corrode
> the MS21047 anchor nut and could make future removal difficult. Almost any
> paint system designed for steel will do.
>
>
> Ian Rickard G-IANI XS Trigear, 350hours
> Europa Club Mods Specialist
> e-mail g-iani@ntlworld.com
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|