Today's Message Index:
----------------------
1. 08:14 AM - Heater - From Ex. Silencer (stephen vestuti)
2. 08:37 AM - Re: Heater - From Ex. Silencer (Peter Jeffers)
3. 02:15 PM - Newly formed Touring Motor Glider Association International (jb92563)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Heater - From Ex. Silencer |
Hi All,
I am thinking about having a flange welded on to the exhaust
silencer HEATSHIELD to accept a cabin heat assy. with hose out let
to the stb. & port foot wells,
has anyone tried this and if so is there enough " draft " from the
silencer / heat shield gap to provide enough heat ?
Steve.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=364359#364359
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Heater - From Ex. Silencer |
Hi Steve,
We have a classic Europa with pre XS engine installation and have for many
years used air heated by only a small section of the exhaust surface area.
The air flows into the cabin via 2" diameter scat hose and a butterfly valve
(old Land Rover Carburettor throttle valve). The flow is quite small, in
fact very small but the cabin is so well sealed that we happily maintain
20 c when the OAT is minus 5.
Pete
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of stephen vestuti
Sent: 20 January 2012 16:11
Subject: Europa-List: Heater - From Ex. Silencer
Hi All,
I am thinking about having a flange welded on to the exhaust
silencer HEATSHIELD to accept a cabin heat assy. with hose out let
to the stb. & port foot wells,
has anyone tried this and if so is there enough " draft " from the
silencer / heat shield gap to provide enough heat ?
Steve.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=364359#364359
-----
No virus found in this message.
Checked by AVG - www.avg.com
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Newly formed Touring Motor Glider Association International |
Come visit the TMGA web site.
There is a Europa forum page where I built a map of all the Europas from the US
FAA database.
I also invite anyone to come join this years Annual TMG fly-in in Minden, NV, USA
July 12-15, where you will meet a lot of like minded folks with Touring Motor
gliders.
Our new association mailed out over 600 invitations to every US TMG owner and should
see a spectacular turnout this year.
Pictures and info are on the website above.
Enjoy
Ray
--------
Ray
Kolb UltraStar (Cuyuna UL-202)
Moni MotorGlider
Schreder HP-11 Glider
Grob 109 Motorglider
Do Not Archive
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=364391#364391
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|