---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 03/22/12: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:07 AM - Re: Quick Connect bell cranks (craig) 2. 02:24 AM - Re: batch of classic fuel filler pipes being made (MalcolmH) ________________________________ Message 1 _____________________________________ Time: 02:07:07 AM PST US From: "craig" Subject: RE: Europa-List: Quick Connect bell cranks Thanks Bud, The clay idea is great, I have 2 digital micrometers with the depth gauge on the end So measuring should be no problem Regards craig From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Bud Yerly Sent: Thursday, March 22, 2012 2:18 PM Subject: Re: Europa-List: Quick Connect bell cranks Craig, I noticed tonight that my email from my shop to you has not posted yet. It may have gone to your personal address. I have attached some further clarification on rigging and trimming in that post. I personally use clay to determine my Tufnol Euro 8 pad thickness. To do this simply put a thin layer of clay on your fuselage Quick Disconnects. Lightly oil the wing bell crank to keep the clay from sticking after disassembly. Simply rig the aircraft and then move the aileron a 1/4 inch or so then disassembly. Use an inexpensive caliper or machinist rule with a slide to determine the thickness of spacer you require. You don't want to have the QDs hard pressed against one another but just touching. Then just install your Euro 8 to the thickness measured off the clay. A caliper when opened has a small metal depth gauge which makes it easy to measure your thickness, a machinist rule works well also. I carry varying thicknesses of phenolic in my shop as one size does not fit all situations. Regards, Bud Yerly Europa Tech Support Custom Flight Creations, Inc. www.customflightcreations.com (813) 653-4989 Sent from my laptop. Do not archive ________________________________ Message 2 _____________________________________ Time: 02:24:44 AM PST US Subject: Europa-List: Re: batch of classic fuel filler pipes being made From: "MalcolmH" Hi Neville, Thanks for organising this and please count me in for a kit as well Regards Malcolm Read this topic online here: http://forums.matronics.com/viewtopic.php?p=369120#369120 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.