Today's Message Index:
----------------------
1. 02:37 AM - Re: for interest - float bowl gaskets (Remi Guerner)
2. 06:54 AM - Flight Test Cards (AirEupora)
3. 04:55 PM - Nitrile Float Bowl Gasket (Robert Borger)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: for interest - float bowl gaskets |
Its a pitty Bing / Rotax still use paper or cork gaskets were Viton would eliminate
this issue, especially on the 914 were there is a significant differential
pressure between the inside of the carb bowl and ambient.
Another thing is when you remove the carb bowls without removing the carbs from
the engine, it can be difficult to put them back on without pinching the gasket.
Use a mirror to make sure the gasket is positioned in its groove all around
before tightening the bowl.
Remi
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=373732#373732
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Flight Test Cards |
I was wondering if anybody had developed Flight Test Cards for an Europa XS tri-gear
with a Jabiru 3300 engine. I found one from Bill VonDane, but it appears
to be for a Rotex.
I have an FAA Inspector coming out on Friday so it looks like I'll be doing my
first flight this coming Monday. If he gives me the Airworthiness Certificate
and doesn't find anything major wrong with my build.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=373762#373762
Attachments:
http://forums.matronics.com//files/img_2389_1024x610_268.jpg
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Nitrile Float Bowl Gasket |
Rotax 9xx folks,
FWIW, I located a source of Nitrile float bowl gaskets for the Bing 64 carbs on
the Rotax 912 & 914 engines.
Supposed to be superior to both the paper and cork gaskets:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320625111138#ht_1255wt_1165
I have ordered a pair of them to see how they will work and will let the lists
know what I find out.
Blue skies & tailwinds,
Bob Borger
Europa XS Tri, Rotax 914, Airmaster C/S Prop.
Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP
3705 Lynchburg Dr.
Corinth, TX 76208-5331
Cel: 817-992-1117
rlborger@mac.com
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|