Today's Message Index:
----------------------
1. 02:17 AM - Re: Gear down and locked switch (Richard Lamprey)
2. 03:16 AM - Arplast PV50 Manual Needed (Kelvin Cobb)
3. 08:32 AM - Re: Arplast PV50 Manual Needed (Peter Jeffers)
4. 12:48 PM - Re: Jabiru Cowlings (Groups)
5. 01:02 PM - Re: Jabiru Cowlings (Gerry Holland)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Gear down and locked switch |
Paul, I have a gear locked microswitch mounted on the inner port side of the wheel
well. It is engaged by a small flat plate fixed to the side of the LGO8P
arm, such that when the arm has actually moved overcentre (ie is locked), the
switch engages, and a green light illuminates on the panel.
I thought about putting it in the gear-locked gate, but this only tell you that
the lever is in the gate, and not that the gear is locked down (which are two
different things, especially if you have any movement in those 3 bolts attaching
the gear lever to LG08S caused by eg turbulence).
None of this stopped my from landing gear-up, when I had moved the landing gear
right down, but not engaged in the gate.... no green light...my head was seriously
in the wrong place that day... .
Best
Richard
Kenya Classic 5Y-LRY
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=379464#379464
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Arplast PV50 Manual Needed |
Hi All,
Would anyone happen to have a copy of the Arplast PV50 installation/set up
manual?
Having changed all three blades on mine, I think I'm running a little on
the fine side.....
Thanks in advance
Kelvin G-BZAM
--
If you're not living life on the edge
you're taking up too much space
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Arplast PV50 Manual Needed |
Hi Kelvin,
Give ma a call on 01494 881431 and I will try to help.
Pete Jeffers Europa Club LAA Rep
_____
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Kelvin Cobb
Sent: 29 July 2012 11:16
Subject: Europa-List: Arplast PV50 Manual Needed
Hi All,
Would anyone happen to have a copy of the Arplast PV50 installation/set up
manual?
Having changed all three blades on mine, I think I'm running a little on the
fine side.....
Thanks in advance
Kelvin G-BZAM
--
If you're not living life on the edge
you're taking up too much space
_____
No virus found in this message.
Checked by AVG - www.avg.com
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Jabiru Cowlings |
Gerry,
I wonder if jabiru Europa cowls would fit my ULPowered Europa as I have hit a wall
with the project, all else is finished just stuck on cowls.
Vince
G-BWUP UL260iS
ULPowered Tailwheel Europa
On 28 Jul 2012, at 11:01, William McClellan <wilwood@earthlink.net> wrote:
>
> Gerry,
> Jabiru should have cowling and FWF for the 3300 Europa. At least they said they
did when I questioned them about the cooling ducting I got from them many
years ago.
> Bill
>
> -----Original Message-----
>> From: Gerry Holland <gholland@content-stream.co.uk>
>> Sent: Jul 27, 2012 9:33 AM
>> To: europa-list@matronics.com
>> Subject: Europa-List: Jabiru Cowlings
>>
>>
>> Hi.
>> Anyone have or know of a set of Jabiru 3300 Engine cowlings?
>> New or used. Send me a PM if you can help. Many Thanks.
>> Regards
>> Gerry
>>
>>
>>
>>
>
>
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Jabiru Cowlings |
Vince Hi!
Not sure if the Jabiru cowlings would fit a UL Engine install.
I fitted Subaru Cowlings to my Rotax powered Europa. One or two shaping changes
but if you can get the firewall fixing right it could work out with Jabiru Cowlings.
Two things.
I'll try and find out if G-SRYY is in West Country. It's a Jabiru 3300 powered
aircraft and would be worth a look.
Why don't you contact Neville Eyre. He let me know he could get a set made if needed.
neveyre@btinternet.com
Regards
Gerry
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|