---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 07/29/12: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:17 AM - Re: Gear down and locked switch (Richard Lamprey) 2. 03:16 AM - Arplast PV50 Manual Needed (Kelvin Cobb) 3. 08:32 AM - Re: Arplast PV50 Manual Needed (Peter Jeffers) 4. 12:48 PM - Re: Jabiru Cowlings (Groups) 5. 01:02 PM - Re: Jabiru Cowlings (Gerry Holland) ________________________________ Message 1 _____________________________________ Time: 02:17:19 AM PST US Subject: Europa-List: Re: Gear down and locked switch From: "Richard Lamprey" Paul, I have a gear locked microswitch mounted on the inner port side of the wheel well. It is engaged by a small flat plate fixed to the side of the LGO8P arm, such that when the arm has actually moved overcentre (ie is locked), the switch engages, and a green light illuminates on the panel. I thought about putting it in the gear-locked gate, but this only tell you that the lever is in the gate, and not that the gear is locked down (which are two different things, especially if you have any movement in those 3 bolts attaching the gear lever to LG08S caused by eg turbulence). None of this stopped my from landing gear-up, when I had moved the landing gear right down, but not engaged in the gate.... no green light...my head was seriously in the wrong place that day... . Best Richard Kenya Classic 5Y-LRY Read this topic online here: http://forums.matronics.com/viewtopic.php?p=379464#379464 ________________________________ Message 2 _____________________________________ Time: 03:16:29 AM PST US Subject: Europa-List: Arplast PV50 Manual Needed From: Kelvin Cobb Hi All, Would anyone happen to have a copy of the Arplast PV50 installation/set up manual? Having changed all three blades on mine, I think I'm running a little on the fine side..... Thanks in advance Kelvin G-BZAM -- If you're not living life on the edge you're taking up too much space ________________________________ Message 3 _____________________________________ Time: 08:32:51 AM PST US From: "Peter Jeffers" Subject: RE: Europa-List: Arplast PV50 Manual Needed Hi Kelvin, Give ma a call on 01494 881431 and I will try to help. Pete Jeffers Europa Club LAA Rep _____ From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Kelvin Cobb Sent: 29 July 2012 11:16 Subject: Europa-List: Arplast PV50 Manual Needed Hi All, Would anyone happen to have a copy of the Arplast PV50 installation/set up manual? Having changed all three blades on mine, I think I'm running a little on the fine side..... Thanks in advance Kelvin G-BZAM -- If you're not living life on the edge you're taking up too much space _____ No virus found in this message. Checked by AVG - www.avg.com ________________________________ Message 4 _____________________________________ Time: 12:48:30 PM PST US Subject: Re: Europa-List: Jabiru Cowlings From: Groups Gerry, I wonder if jabiru Europa cowls would fit my ULPowered Europa as I have hit a wall with the project, all else is finished just stuck on cowls. Vince G-BWUP UL260iS ULPowered Tailwheel Europa On 28 Jul 2012, at 11:01, William McClellan wrote: > > Gerry, > Jabiru should have cowling and FWF for the 3300 Europa. At least they said they did when I questioned them about the cooling ducting I got from them many years ago. > Bill > > -----Original Message----- >> From: Gerry Holland >> Sent: Jul 27, 2012 9:33 AM >> To: europa-list@matronics.com >> Subject: Europa-List: Jabiru Cowlings >> >> >> Hi. >> Anyone have or know of a set of Jabiru 3300 Engine cowlings? >> New or used. Send me a PM if you can help. Many Thanks. >> Regards >> Gerry >> >> >> >> > > > > > ________________________________ Message 5 _____________________________________ Time: 01:02:35 PM PST US From: Gerry Holland Subject: Re: Europa-List: Jabiru Cowlings Vince Hi! Not sure if the Jabiru cowlings would fit a UL Engine install. I fitted Subaru Cowlings to my Rotax powered Europa. One or two shaping changes but if you can get the firewall fixing right it could work out with Jabiru Cowlings. Two things. I'll try and find out if G-SRYY is in West Country. It's a Jabiru 3300 powered aircraft and would be worth a look. Why don't you contact Neville Eyre. He let me know he could get a set made if needed. neveyre@btinternet.com Regards Gerry ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.