---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 03/05/13: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:56 AM - Monowheel trailer (Remi Guerner) 2. 01:28 AM - Re: Monowheel trailer (tennant) 3. 02:31 AM - MAP and pitch control (Max Cointe) 4. 04:55 AM - Re: Re: Mono Trailer (Ian Cook) 5. 07:50 AM - Re: Help with rough ride rough stomach (Paul McAllister) 6. 02:03 PM - Re: Dynamic Prop Balancer (Richard Wheelwright) 7. 06:36 PM - Upholstery Requirements (N6ZY) ________________________________ Message 1 _____________________________________ Time: 12:56:41 AM PST US Subject: Europa-List: Monowheel trailer From: "Remi Guerner" Hi all, Does anyone know the actual weight of the factory trailer for the monowheel? Remi Read this topic online here: http://forums.matronics.com/viewtopic.php?p=395667#395667 ________________________________ Message 2 _____________________________________ Time: 01:28:06 AM PST US Subject: Europa-List: Re: Monowheel trailer From: "tennant" I seem to remember the TV weighing it at 123 Kg. But it is a long time ago! If you want I can check the papers tonight. Barry -------- Barry Tennant D-EHBT At EDLM - Germany Read this topic online here: http://forums.matronics.com/viewtopic.php?p=395668#395668 ________________________________ Message 3 _____________________________________ Time: 02:31:53 AM PST US From: "Max Cointe" Subject: Europa-List: MAP and pitch control Hi There All, Sunday was the first day of the year with a suitable weather and we flew a couple of hours to have a breath like whales over the temperature inversion altitude (~4000FT). During that flight I was surprised to see that I was unable to maintain the MAP over 25 at 6000FT with full throttle and then saw it decreasing when continued to climb (together with an increase of the RPM). Due to timing I didn't had time to look for the max altitude reachable and maintainable and see what are the MAP and RPM but I'm curious to know what is your experience with the same configuration: 3 gears 912ULS and Airmaster AP332 at full weight (620Kg). Max Cointe mcointe@free.fr F-PMLH Europa XS_TriGear Kit #560-2003 912ULS/AirmasterAP332 450 hours ________________________________ Message 4 _____________________________________ Time: 04:55:42 AM PST US Subject: Re: Europa-List: Re: Mono Trailer From: Ian Cook I may be able to help my mono trailer is surplus because I now have the motor glider one. I was just going to paint it but am short of time so if you want to see it is based in Andover Hants. Ian Cook Sent from my iPhone On 4 Mar 2013, at 10:36, "flyingphil2" wrote: > > Hi Graham, > > Many thanks for your reply but I'm just looking for an open mono trailer. > > Regards, > > Phil > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=395581#395581 > > > > > > > > > > ________________________________ Message 5 _____________________________________ Time: 07:50:24 AM PST US Subject: Re: Europa-List: Help with rough ride rough stomach From: Paul McAllister Hi, Graeme It may not be an option in the UK, but in the US I always try and fly above the clouds, assuming its not totally overcast. The air above the dew point tends to be smoother. Paul > > ________________________________ Message 6 _____________________________________ Time: 02:03:00 PM PST US Subject: Europa-List: Re: Dynamic Prop Balancer From: "Richard Wheelwright" Bob, Thank you for your replys. A fellow Europa owner has very kindly offered the loan of his Smart Avionics balancing kit. After balancing the carbs I hope to get the job completed shortly. The problem I had was the weight had dropped off the back of the Woodcomp prop. It was only held with double sided tape, and supply like this. This seems to be a common supply problem with Woodcomp. They produce a fantastic product but this weight attachment issue could be improved and will be on the completion of my balancing. Thank you again -------- Richard Wheelwright G-IRPW 90% finished with that 90% to Finish Read this topic online here: http://forums.matronics.com/viewtopic.php?p=395701#395701 ________________________________ Message 7 _____________________________________ Time: 06:36:38 PM PST US Subject: Europa-List: Upholstery Requirements From: "N6ZY" I want to work out how many yards of upholstery fabric are needed to cover the interior of a Europa. If anyone has done this, could you please advise on how much fabric or leather you used, and was that just to do the seats, or the fuselage walls as well? Thanks. Jerry Read this topic online here: http://forums.matronics.com/viewtopic.php?p=395710#395710 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.