---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 04/07/13: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:16 AM - Re: DOTH-le touqet anyone? (David Joyce) 2. 12:22 AM - Re: DOTH-le touqet anyone? (graeme bird) 3. 02:14 AM - radio noise (g-fizy) 4. 03:04 AM - Re: radio noise (gtagr) 5. 09:41 AM - Re: radio noise (g-fizy) 6. 10:39 AM - Re: DOTH-le touqet anyone? (graeme bird) 7. 10:55 AM - Re: Re: DOTH-le touqet anyone? (David Joyce) 8. 11:02 AM - Re: Re: radio noise (David Joyce) ________________________________ Message 1 _____________________________________ Time: 12:16:08 AM PST US From: "David Joyce" Subject: Re: Europa-List: DOTH-le touqet anyone? Graeme, You have got a PLB I trust- someone fined over 900 euros for arriving the without one last year, apparently! Regards, David Joyce, G-XSDJ PS Europa Club trip to Le Touquet on May 11th On Sat, 6 Apr 2013 23:40:39 -0700 "graeme bird" wrote: > > > I am planning to be there around 11:15 BST depart mid >afternoon if anyone fancies it. > > -------- > Graeme Bird > G-UMPY > Mono 912S/Woodcomp 3000/3W > Newby: 55 hours 1 year g(at)gdbmk.co.uk > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=398019#398019 > > > > > > > >Admin. > > > ________________________________ Message 2 _____________________________________ Time: 12:22:19 AM PST US Subject: Europa-List: Re: DOTH-le touqet anyone? From: "graeme bird" David, I have a mcmurdo gps fast find. -------- Graeme Bird G-UMPY Mono 912S/Woodcomp 3000/3W Newby: 55 hours 1 year g(at)gdbmk.co.uk Read this topic online here: http://forums.matronics.com/viewtopic.php?p=398021#398021 ________________________________ Message 3 _____________________________________ Time: 02:14:37 AM PST US Subject: Europa-List: radio noise From: "g-fizy" My radio is not very clear on receive ,i was thinking of replacing it,but i was in the hanger yesterday to charge the battery .When i switched everything on the radio was crystal clear ,,so it must be the rotax 80hp causing the problem .. has any one got a few ideas where i should look ? many thanks jim davis -------- owner g-fizy Read this topic online here: http://forums.matronics.com/viewtopic.php?p=398024#398024 ________________________________ Message 4 _____________________________________ Time: 03:04:31 AM PST US Subject: Europa-List: Re: radio noise From: "gtagr" Jim, My experience is that the radio and the tacho are both sensitive to interference if they run alongside the cables to the mag anywhere. I had just this problem a few months ago after 'tidying up' the wiring behind my panel. If they do have to run close - like through the bulkhead, then I suggest it is better for them to run at 90 degrees to the mag cables to avoid/reduce inducing current in them, or that one or the other of them is double-screened and the screen earthed. That said, its also rather easy [for us amateurs?] to get poor BNC or other connector terminations in the screened radio cables themselves as the connections are a bit tricky to make without specialist and rather costly tools. I hope that helps somehow Clive Sutton G-TAGR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=398026#398026 ________________________________ Message 5 _____________________________________ Time: 09:41:16 AM PST US Subject: Europa-List: Re: radio noise From: "g-fizy" thanks Clive ,I never thought of connections and wire position i no their are some Redundant cables behind my panel, I mite have a spring clean regards jim -------- owner g-fizy Read this topic online here: http://forums.matronics.com/viewtopic.php?p=398055#398055 ________________________________ Message 6 _____________________________________ Time: 10:39:24 AM PST US Subject: Europa-List: Re: DOTH-le touqet anyone? From: "graeme bird" bit hazy over the channel but otherwise great. Bike hire 4 euros per hour and 15min ride into town and beach. Not sure now if I need to close the flight plan https://www.facebook.com/media/set/?set=a.10152019083840715.1073741828.754055714&type=1&l=819c351b7a -------- Graeme Bird G-UMPY Mono 912S/Woodcomp 3000/3W Newby: 55 hours 1 year g(at)gdbmk.co.uk Read this topic online here: http://forums.matronics.com/viewtopic.php?p=398064#398064 ________________________________ Message 7 _____________________________________ Time: 10:55:38 AM PST US From: "David Joyce" Subject: Re: Europa-List: Re: DOTH-le touqet anyone? Graeme, not in this country if you land where you said you would. The system relies on the destination doing something if you don't turn up. If that is an unmanned strip then nominally you should have appointed some responsible person to check on your arrival. Regards, David Joyce, GXSDJ On Sun, 7 Apr 2013 10:38:47 -0700 "graeme bird" wrote: > > > bit hazy over the channel but otherwise great. Bike hire >4 euros per hour and 15min ride into town and beach. > Not sure now if I need to close the flight plan > > https://www.facebook.com/media/set/?set=a.10152019083840715.1073741828.754055714&type=1&l=819c351b7a > > -------- > Graeme Bird > G-UMPY > Mono 912S/Woodcomp 3000/3W > Newby: 55 hours 1 year > g(at)gdbmk.co.uk > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=398064#398064 > > > > > > > >Un/Subscription, >Forums! >Admin. > > > ________________________________ Message 8 _____________________________________ Time: 11:02:14 AM PST US From: "David Joyce" Subject: Re: Europa-List: Re: radio noise P.S. I notice that the sea temp between Dover & Calais is just 5.4 degrees today, some two and a half degrees colder than the minimum I recorded throughout the winter before I was planning to fly to Australia. Shows that March really has been cold, plus I guess that persistent NE winds blow the colder N Sea water into the Channel. And shows that X channel trips need serious preparation at this time of year! David Joyce On Sun, 7 Apr 2013 09:40:32 -0700 "g-fizy" wrote: > > > thanks Clive ,I never thought of connections and wire >position i no their are some Redundant cables behind my >panel, I mite have a spring clean > > regards jim > > -------- > owner g-fizy > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=398055#398055 > > > > > > > >Un/Subscription, >Forums! >Admin. > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.