----------------------------------------------------------
                           Europa-List Digest Archive
                                      ---
                     Total Messages Posted Wed 06/19/13: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 01:27 AM - Re: 912UL operating temperature  (Richard Lamprey)
     2. 01:51 AM - Re: Rotax 914 Parts CD6 and CD7  (Trevor Pond)
 
 
 
________________________________  Message 1  _____________________________________


Time: 01:27:47 AM PST US
Subject: Europa-List: Re: 912UL operating temperature
From: "Richard Lamprey" <lamprey.richard@gmail.com>


Thanks everyone for their detailed responses, and to Nigel for info on carb adjustment.

This 912UL has 560 hrs, and I operate off a strip at 5500 asl, usual ambient temp
is about 28C.  So I am sure it will be running a bit rich, and I was used to
slightly sooty plugs, but not to point of misfire.  Recently I have been operatring
a bit more at 12,000' asl (yes a 912UL/ fixed pitch prop will get me there,
but only 1 up)

I havnt done any carb adjustments recently, but having unblanked the radiators
it all got worse (all plugs but especially the cool back ones, (3 and 4) , so
the first thing is to blank them again, and see.  And fly lower.  Not enough time
for all these tests, but will try a bit at a time over the next few months.

If it persists, then I'll look at the carbs again.

Thanks again.

All best
Richard
Kenya


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=402979#402979


________________________________  Message 2  _____________________________________


Time: 01:51:47 AM PST US
From: Trevor Pond <trevpond@aol.com>
Subject: Re: Europa-List: Rotax 914 Parts CD6 and CD7


Hi,

Contact Nev Eyre, he'll be able to help.

Best regards

Trev G LINN

Sent from my iPhone 

On 19 Jun 2013, at 01:45, "N6ZY" <jffisher@gmail.com> wrote:

> 
> I am building an XS which was originally intended to take a 912, but I have changed
to a 914.  As a result, I am missing the aluminum sheet parts CD6 and CD7
which define the air intake compartment.  Europa in the UK is still in the
middle of their move, so i cannot get replacement parts right now.
> 
> Does anyone have a pattern of the CD6 and CD7 parts, so that I can make up my
own versions?  Thanks.
> 
> Jerry Fisher
> 
> 
> 
> 
> Read this topic online here:
> 
> http://forums.matronics.com/viewtopic.php?p=402973#402973
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               europa-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Europa-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/europa-list
Browse Digests                   http://www.matronics.com/digest/europa-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.