Today's Message Index:
----------------------
1. 01:43 AM - mono wheel dampers (roddyeuropa@aol.com)
2. 02:40 AM - Re: Starboard flap pin =?UTF-8?B?ZG9lc27DosKAwpl0IGU=?= =?UTF-8?B?bmdhZ2UgZWFzeSBhbnkgbG9uZ2VyIMOiwoDCkyB3aHk/? (Frans Veldman)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | mono wheel dampers |
Does anyone know the price (or at least a previous price) of the dampers us
ed in the monowheel? Europa are currently unable to supply them, or give me
a price. I have sourced some from a Europa owner who has done mono->trigea
r conversion, and need to know to be able to pay him.
Thanks
Roddy Kesterton
G-IKRK #220
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Starboard flap pin =?UTF-8?B?ZG9lc27DosKAwpl0IGU=?= |
=?UTF-8?B?bmdhZ2UgZWFzeSBhbnkgbG9uZ2VyIMOiwoDCkyB3aHk/?
On 07/08/2013 06:13 PM, Neville Eyre wrote:
> Hi Roland,
> The ''eyeball'' ball socket is held captive by a ring [ collar ], if
> the ring has moved outboard, it will allow the eyeball to swivel too
> far, that is why the pin will jam in the hole.
What also helps is to use a bit of sticky grease ("white grease")
between the ball and the collar, and not moving the flap drive tube to a
different position when the wings are off. The ball will then stay in
the right position to catch the pin.
Before I had the sticky grease on but some teflon doped oil in it
instead, the balls turned with any movement and rigging was sometimes
very difficult.
Frans
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|