Europa-List Digest Archive

Thu 08/08/13


Total Messages Posted: 8



Today's Message Index:
----------------------
 
     1. 12:29 AM - Re: Trouble on the line (Roland)
     2. 02:00 PM - Prop Tape. (Alan Carter)
     3. 02:16 PM - Re: Re: Trouble on the line (Trevpond@aol.com)
     4. 04:02 PM - Re: Prop Tape. (David Joyce)
     5. 04:15 PM - Re: Prop Tape. (GRAHAM SINGLETON)
     6. 04:16 PM - Re: Re: Trouble on the line (GRAHAM SINGLETON)
     7. 04:43 PM - Re: Re: Trouble on the line (Kingsley Hurst)
     8. 04:57 PM - Re: Prop Tape. (Alan Carter)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:29:38 AM PST US
    Subject: Re: Trouble on the line
    From: "Roland" <schmidtroland@web.de>
    Hi Ferg, the suggestion Nev made concerning the flap pin engagement worked on my Europa, so rigging is no longer a pain. BTW: You won't need an aircraft hammer for 120 Pounds to do the job ;-) Good luck! Roland PH-ZTI XS Trigear 914 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=406218#406218


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:00:41 PM PST US
    Subject: Prop Tape.
    From: "Alan Carter" <alancarteresq@onetel.net>
    Hi All Three Bladed Propeller, Use of Prop Tape. (12" length per blade) Is it likely to unbalance the prop. Has anyone lost one strip from the blade. Any Comments on using Prop Tape Alan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=406257#406257


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:16:26 PM PST US
    From: Trevpond@aol.com
    Subject: Re: Trouble on the line
    Roland, Why have you made this attack on Nevilles anticipated income?!! Nev bought a job lot of these hammers. regards Trev Pond G-LINN In a message dated 08/08/2013 21:32:24 GMT Daylight Time, schmidtroland@web.de writes: --> Europa-List message posted by: "Roland" <schmidtroland@web.de> Hi Ferg, the suggestion Nev made concerning the flap pin engagement worked on my Europa, so rigging is no longer a pain. BTW: You won't need an aircraft hammer for 120 Pounds to do the job ;-) Good luck! Roland PH-ZTI XS Trigear 914 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=406218#406218


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:02:56 PM PST US
    From: "David Joyce" <davidjoyce@doctors.org.uk>
    Subject: Re: Prop Tape.
    Alan, I have seen a demonstration of prop balancing at Woodcomp where the addition of half a small postage stamp on one blade was clearly shown to unbalance it, so that I guess you would need to be extremely careful in your application or plan to have your prop rebalanced afterwards. Regards, David Joyce, G- XSDJ On Thu, 8 Aug 2013 13:59:47 -0700 "Alan Carter" <alancarteresq@onetel.net> wrote: ><alancarteresq@onetel.net> > > Hi All > Three Bladed Propeller, > Use of Prop Tape. (12" length per blade) > > Is it likely to unbalance the prop. > Has anyone lost one strip from the blade. > Any Comments on using Prop Tape > > Alan > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=406257#406257 > > > > > > > >Un/Subscription, >Forums! >Admin. > > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:15:49 PM PST US
    From: GRAHAM SINGLETON <grahamsingleton@btinternet.com>
    Subject: Re: Prop Tape.
    Alan=0Athere are several things to consider,=0A=0AIt will unbance the prop and the only way to rebalance is dynamic.=0A=0AIf you are unlucky and have a tape come off on a hot day the=0Avibration will be horrendous. Cracked en gine mounts is not unknown.=0A=0AIt will spoil the carefully designed airfo il section and soil efficiency=0AMy 2 cents=0AGraham=0A=0A=0A=0A=0A________ ________________________=0A From: Alan Carter <alancarteresq@onetel.net>=0A Alan Carter" <alancarteresq@onetel.net>=0A=0AHi All=0AThree Bladed Propelle r,=0AUse of Prop Tape. (12" length per blade)=0A=0AIs it likely to unbalanc e the prop.=0AHas anyone lost one strip from the blade.=0AAny Comments on u sing Prop Tape =0A=0AAlan=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ah ttp://forums.matronics.com/viewtopic.php?p=406257#406257=0A=0A=0A=0A=0A ==================


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:16:45 PM PST US
    From: GRAHAM SINGLETON <grahamsingleton@btinternet.com>
    Subject: Re: Trouble on the line
    Bet the govmint sold them to him!;-0=0AGraham=0A=0A=0A=0A=0A_______________ _________________=0A From: "Trevpond@aol.com" <Trevpond@aol.com>=0ATo: euro pa-list@matronics.com =0ASent: Thursday, 8 August 2013, 22:16=0ASubject: Re : Europa-List: Re: Trouble on the line=0A =0A=0A=0ARoland,=0A-=0AWhy have you made this attack on Nevilles anticipated income?!!- Nev =0Abought a job lot of these hammers.=0A-=0Aregards=0A-=0A-=0ATrev Pond=0AG-LINN =0A-=0AIn a message dated 08/08/2013 21:32:24 GMT Daylight Time, =0Aschmi dtroland@web.de writes:=0A--> Europa-List message posted by: "Roland" <sch midtroland@web.de>=0A>=0A>Hi =0A Ferg,=0A>=0A>the suggestion Nev made conc erning the flap pin engagement worked =0A on my Europa, so rigging is no l onger a pain.=0A>=0A>BTW: You won't need an =0A aircraft hammer for 120 Po unds to do the job ;-)=0A>=0A>Good =0A luck!=0A>=0A>Roland=0A>PH-ZTI=0A>XS Trigear 914=0A>=0A>=0A>=0A>=0A>Read this =0A topic online =0A here:=0A> =0A>http://forums.matronics.com/viewtopic.php?p=406218#406218 =0A>=0A>=0A ===============


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:43:25 PM PST US
    From: "Kingsley Hurst" <kingsnjan@westnet.com.au>
    Subject: Re: Trouble on the line
    I think it might be more likely Nev has the Govnint in his sights for sales G. I'll bet they have never had the opportunity to buy anything so cheaply before! K do not archive ----- Original Message ----- From: GRAHAM SINGLETON To: europa-list@matronics.com Sent: Friday, August 09, 2013 9:16 AM Subject: Re: Europa-List: Re: Trouble on the line Bet the govmint sold them to him!;-0 Graham


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:57:53 PM PST US
    Subject: Re: Prop Tape.
    From: "Alan Carter" <alancarteresq@onetel.net>
    Hi All. I have the pro tape, maybe i will wait a while before doing anything. My prop i guess is already out of balance, People tell me the spinner is going up and down, but i really don,t notice anything in the cockpit. Its been like it for years as the previous owner never did anything to the aircraft and just clocked up 300 hours of cheap flying,Plus the 5 hours after i had paid for it. The prop is a Airplarse PV50, seems to have a groups of washers [5] in three places located around the hub, all you could do is file bits of the washers, see no other way,?? have no spares washers. How long would it take with a (prop balancer) to balance a prop.?? The nearest place to Headcorn that could do the job.? Regards. Alan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=406270#406270




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --