---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 08/15/13: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:12 AM - Re: Coms port settings (Peter Jeffers) 2. 04:35 AM - Re: Coms port settings (Alan Burrill) 3. 04:59 AM - Re: MONOWHEEL RE-MOUNT (h&jeuropa) 4. 06:37 AM - Re: Coms port settings (Peter Jeffers) 5. 08:02 AM - Re: MONOWHEEL RE-MOUNT (Fred Klein) 6. 08:38 AM - Laddingford (David Joyce) 7. 12:29 PM - wing tip light covers (Fred Klein) 8. 12:44 PM - Re: wing tip light covers (Jeremy Fisher) 9. 12:49 PM - Re: wing tip light covers (Pete) ________________________________ Message 1 _____________________________________ Time: 04:12:32 AM PST US From: " Peter Jeffers" Subject: RE: Europa-List: Coms port settings Hi Alan, OK my problem is what boxes to tick on the Lowrance setup. The first page gives a choice of NMEA output, NMEA input, or NMEA GPS input. I presume I should tick the first one ie NMEA output. Once you make this choice then you have to CONFIGURE NMEA, this gives me the option of choosing one or more of the following:- GLL, RMC & RMB, GGA, GSA & GSV, or APB. All this leaves me stone cold as I have no idea what any of these options mean or refer to. Have you any thoughts on any of that? Hopefully Pete _____ From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Alan Burrill Sent: 14 August 2013 22:26 Subject: Re: Europa-List: Coms port settings Peter, The manual here: http://www.sportys.com/source/slashpages/manuals/2034.pdf Appears to quite detailed on Page 82. The only ref to manufacturers is with ref to the wiring for the unit. Is it the settings or the wiring? Alan Sent from my iPad On 13 Aug 2013, at 13:22, " Peter Jeffers" wrote: Hi Craig, Thanks for that. I have got the original manual but all it says about the settings is that you need to set the send and receive ports according to Lowrance support. Lowrance support does not support the 2000c any more and have not do so for about three years hence they are useless as far as assistance is concerned. I guess I need help from someone who set their system up a few years back. Pete _____ From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of craig Sent: 13 August 2013 13:08 Subject: RE: Europa-List: Coms port settings I have had some success getting workshop manuals etc for older stuff off ebay, people running the manuals Through a photo copier and outputting it to a PDF file then selling the thing on CD for a few bucks Worth a look, good luck craig http://www.matronics.com/Navigator?Europa-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 2 _____________________________________ Time: 04:35:56 AM PST US Subject: Re: Europa-List: Coms port settings From: Alan Burrill Ah now I get it. NEMA output and then RMC & RMB. Based on what's used on my Trutak set up. Speed is 4800 Probable best if you ring or let me know when you next at WAP and I can help . Alan Sent from my iPhone On 15 Aug 2013, at 12:11, " Peter Jeffers" wrote: > Hi Alan, > OK my problem is what boxes to tick on the Lowrance setup. > > The first page gives a choice of NMEA output, NMEA input, or NMEA GPS inp ut. I presume I should tick the first one ie NMEA output. > > Once you make this choice then you have to CONFIGURE NMEA, this gives me t he option of choosing one or more of the following:- GLL, RMC & RMB, GG A, GSA & GSV, or APB. > > All this leaves me stone cold as I have no idea what any of these options m ean or refer to. Have you any thoughts on any of that? > > Hopefully > > Pete > > From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-ser ver@matronics.com] On Behalf Of Alan Burrill > Sent: 14 August 2013 22:26 > To: europa-list@matronics.com > Subject: Re: Europa-List: Coms port settings > > Peter, > > The manual here: http://www.sportys.com/source/slashpages/manuals/2034.pdf > > > Appears to quite detailed on Page 82. The only ref to manufacturers is wit h ref to the wiring for the unit. > > > Is it the settings or the wiring? > > > Alan > Sent from my iPad > > On 13 Aug 2013, at 13:22, " Peter Jeffers" wrote: > >> Hi Craig, >> Thanks for that. I have got the original manual but all it says about th e settings is that you need to set the send and receive ports according to L owrance support. Lowrance support does not support the 2000c any more and h ave not do so for about three years hence they are useless as far as assista nce is concerned. >> >> I guess I need help from someone who set their system up a few years back .. >> >> Pete >> >> From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-se rver@matronics.com] On Behalf Of craig >> Sent: 13 August 2013 13:08 >> To: europa-list@matronics.com >> Subject: RE: Europa-List: Coms port settings >> >> I have had some success getting workshop manuals etc for older stuff off e bay, people running the manuals >> Through a photo copier and outputting it to a PDF file then selling the t hing on CD for a few bucks >> >> Worth a look, good luck >> >> craig >> >> >> >> >> >> >> http://www.matronics.com/Navigator?Europa-List >> http://forums.matronics.com >> http://www.matronics.com/contribution > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 3 _____________________________________ Time: 04:59:35 AM PST US Subject: Europa-List: Re: MONOWHEEL RE-MOUNT From: "h&jeuropa" Bob, First I wedge a screwdriver between one of the arms and the tire. This takes pressure off the parts so it is easier to rotate them. Then I use a tapered punch to line up the holes. Seems to work pretty well. As the Brits would say, Bob's your uncle! Jim N241BW Read this topic online here: http://forums.matronics.com/viewtopic.php?p=406749#406749 ________________________________ Message 4 _____________________________________ Time: 06:37:51 AM PST US From: " Peter Jeffers" Subject: RE: Europa-List: Coms port settings Ha Alan, Are you going to Laddingford this weekend? Pete _____ From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Alan Burrill Sent: 15 August 2013 12:35 Subject: Re: Europa-List: Coms port settings Ah now I get it. NEMA output and then RMC & RMB. Based on what's used on my Trutak set up. Speed is 4800 Probable best if you ring or let me know when you next at WAP and I can help. Alan Sent from my iPhone On 15 Aug 2013, at 12:11, " Peter Jeffers" wrote: Hi Alan, OK my problem is what boxes to tick on the Lowrance setup. The first page gives a choice of NMEA output, NMEA input, or NMEA GPS input. I presume I should tick the first one ie NMEA output. Once you make this choice then you have to CONFIGURE NMEA, this gives me the option of choosing one or more of the following:- GLL, RMC & RMB, GGA, GSA & GSV, or APB. All this leaves me stone cold as I have no idea what any of these options mean or refer to. Have you any thoughts on any of that? Hopefully Pete _____ From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Alan Burrill Sent: 14 August 2013 22:26 Subject: Re: Europa-List: Coms port settings Peter, The manual here: http://www.sportys.com/source/slashpages/manuals/2034.pdf Appears to quite detailed on Page 82. The only ref to manufacturers is with ref to the wiring for the unit. Is it the settings or the wiring? Alan Sent from my iPad On 13 Aug 2013, at 13:22, " Peter Jeffers" wrote: Hi Craig, Thanks for that. I have got the original manual but all it says about the settings is that you need to set the send and receive ports according to Lowrance support. Lowrance support does not support the 2000c any more and have not do so for about three years hence they are useless as far as assistance is concerned. I guess I need help from someone who set their system up a few years back. Pete _____ From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of craig Sent: 13 August 2013 13:08 Subject: RE: Europa-List: Coms port settings I have had some success getting workshop manuals etc for older stuff off ebay, people running the manuals Through a photo copier and outputting it to a PDF file then selling the thing on CD for a few bucks Worth a look, good luck craig http://www.matronics.com/Navigator?Europa-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 5 _____________________________________ Time: 08:02:31 AM PST US From: Fred Klein Subject: Re: Europa-List: MONOWHEEL RE-MOUNT Bob...I second Jim's comment...I keep a couple of those tapered punches handy...and keeping w/ the mother tongue, I find it works a treat...F. On Aug 14, 2013, at 10:03 AM, ROBERT LINDSAY wrote: > After a tire change, re-mounting the monowheel in the swing arm can be frustrating. Anybody got a clever way to line up the holes in the LG20 nut plate, the LG21 torque plate, The LG02 swing arm and the LG25 stub axle for the three screw-in bolts? > Thanx > Bob > N77EU (XS A077) > Coronado California USA > > > > ________________________________ Message 6 _____________________________________ Time: 08:38:23 AM PST US From: "David Joyce" Subject: Europa-List: Laddingford Dear All, The Laddingford Fly In/ Garden Party has been postponed from this Saturday to Sunday 18 August, in view of poor Wx prospects on Sat. Details + Briefing notes on the. Club website & note it is PPR Regards, David Joyce, GXSDJ ________________________________ Message 7 _____________________________________ Time: 12:29:23 PM PST US From: Fred Klein Subject: Europa-List: wing tip light covers All...please contact me if you have any interest in ordering a set of clear polycarbonate wing tip light covers...I'll be making a run of them shortly. I offer the light cover only, but in my installation, I have fitted LED position lights, strobes, and a halogen landing light for a neat, no drag installation. Photo below...nice winter project! Cheers, Fred ________________________________ Message 8 _____________________________________ Time: 12:44:41 PM PST US Subject: Re: Europa-List: wing tip light covers From: Jeremy Fisher Fred, I am interested. What are they likely to cost? Jerry Fisher On Aug 15, 2013, at 3:28 PM, Fred Klein wrote: > All...please contact me if you have any interest in ordering a set of clear polycarbonate wing tip light covers...I'll be making a run of them shortly. I offer the light cover only, but in my installation, I have fitted LED position lights, strobes, and a halogen landing light for a neat, no drag installation. Photo below...nice winter project! > > Cheers, > > Fred > > ________________________________ Message 9 _____________________________________ Time: 12:49:47 PM PST US Subject: Re: Europa-List: wing tip light covers From: Pete Hi Fred, Please count me in for a set! (If they are not too expensive) Chers and thx! Pete A239 Ottawa On Aug 15, 2013, at 3:28 PM, Fred Klein wrote: > All...please contact me if you have any interest in ordering a set of clear polycarbonate wing tip light covers...I'll be making a run of them shortly. I offer the light cover only, but in my installation, I have fitted LED position lights, strobes, and a halogen landing light for a neat, no drag installation. Photo below...nice winter project! > > Cheers, > > Fred > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.