---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 08/27/13: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:25 AM - Re: tailwheel arm fitting (Rowland Carson) 2. 01:27 AM - Re: tailwheel arm fitting (Rowland Carson) 3. 01:50 AM - Re: Sywell LAA Rally 30th Aug to 1st September (Philip Levi) 4. 01:56 AM - Posted to list in error (Philip Levi) 5. 02:06 AM - Re: Sywell LAA Rally 30th Aug to 1st September (Ivan Shaw) 6. 09:31 AM - Re: Sywell LAA Rally 30th Aug to 1st September (Remi Guerner) 7. 10:37 AM - Re: Re: Sywell LAA Rally 30th Aug to 1st September (David Joyce) 8. 01:33 PM - Re: Sywell LAA Rally 30th Aug to 1st September (K BURNS) 9. 07:23 PM - Interior Paint Styled Finish (Tony Renshaw) ________________________________ Message 1 _____________________________________ Time: 01:25:55 AM PST US Subject: Re: Europa-List: tailwheel arm fitting From: Rowland Carson On 27 Aug 2013, at 00:49, Fred Klein wrote: > > On Aug 26, 2013, at 2:52 PM, Rowland Carson wrote: > >> I'm still seeking confirmation from a UK LAA inspector (or a UK builder who has solved the problem to the LAA's satisfaction) which approach is approved and is not going to cause me administrative grief further down the line. > > Rowland, > > The notation on Fig. 4 on pg 5, chap. 32M describes exactly your "option B"... > > Surely following the build manual will satisfy the inspector...?... Fred - thanks, as so often the answer is "read the fine manual"! in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson | pictures: http://picasaweb.google.com/rowlandcarson ________________________________ Message 2 _____________________________________ Time: 01:27:44 AM PST US Subject: Re: Europa-List: tailwheel arm fitting From: Rowland Carson On 26 Aug 2013, at 23:43, GRAHAM SINGLETON wrote: > Rowland > your inspector shou8ld be able to tell you, if he can't maybe he isn't the right one? Graham - I'm switching inspectors and the new one although fully composite-qualified, has not done a Europa before, so I didn't ask him. As you can see from my other reply, the answer was RTFM anyway. in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson | pictures: http://picasaweb.google.com/rowlandcarson ________________________________ Message 3 _____________________________________ Time: 01:50:58 AM PST US From: Philip Levi Subject: Re: Europa-List: Sywell LAA Rally 30th Aug to 1st September Dear Steve I would be happy to do some duties on the stand if needed. I would prefer to leave Friday clear, but any time on Saturday or Sunday is OK. I am still waiting to receive bank details for payment for clothing. Otherwise I could blow the cobwebs off my cheque book and give you a cheque on the day. Regards, *Philip* * * *Philip J. Levi, FCA, CTA(Fellow), TEP, MRIN, ARAeS* *Chartered Accountant, Chartered Tax Advisor.* ** *Peg Cottage, 39 Water End Road, Maulden, Bedford, MK45 2BD, UK* ** *UK Landline (Home): +44 (0)1525 861847 * *UK Mobile : +44 (0)7590 472102 * **** *E-mail:* *pjlevi@gmail.com** * *Skype: pjlevi* (computer-to-computer or landline, videophone) *Fax to E-mail: From UK only: 0872 110 3300* * * On 27 August 2013 07:09, Steven Pitt wrote: > steven.pitt2@ntlworld.com> > > With three days to go all is coming together. > We have a pitch (see the LAA website for the Rally) and the Committee will > be on hand to welcome you all, Europa followers/owners etc. If you are not > a member, Membership forms will be on hand. > The Club marquee will be pitched although forecasts suggest it will be > used for shelter from the sun rather than rain (let's hope that is > accurate). > Whilst the Committee have arranged stand rotas anyone able to give an hour > or so's help to talk to the public would be welcome. > We are trying to arrange dedicated Europa parking. > Light refreshments will be available and the donation box will be in > action. > > See you over the weekend. > > Steve > > ________________________________ Message 4 _____________________________________ Time: 01:56:07 AM PST US From: Philip Levi Subject: Europa-List: Posted to list in error My apologies to everyone, my last e-mail should have been sent to Steve personally and was sent to the list in error - the dangers of pushing the reply button without thinking first! *Philip* Philip Levi G-BWWB ________________________________ Message 5 _____________________________________ Time: 02:06:13 AM PST US From: "Ivan Shaw" Subject: RE: Europa-List: Sywell LAA Rally 30th Aug to 1st September Hi Steve, Put me down for a stint anytime Saturday. Regards Ivan -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Steven Pitt Sent: 27 August 2013 07:09 Subject: Europa-List: Sywell LAA Rally 30th Aug to 1st September --> With three days to go all is coming together. We have a pitch (see the LAA website for the Rally) and the Committee will be on hand to welcome you all, Europa followers/owners etc. If you are not a member, Membership forms will be on hand. The Club marquee will be pitched although forecasts suggest it will be used for shelter from the sun rather than rain (let's hope that is accurate). Whilst the Committee have arranged stand rotas anyone able to give an hour or so's help to talk to the public would be welcome. We are trying to arrange dedicated Europa parking. Light refreshments will be available and the donation box will be in action. See you over the weekend. Steve ________________________________ Message 6 _____________________________________ Time: 09:31:17 AM PST US Subject: Europa-List: Re: Sywell LAA Rally 30th Aug to 1st September From: "Remi Guerner" Does anyone know what unleaded fuel is available at Sywell? On the airport website they say MOGAS, without any detail. Last time I was there the proposed Mogas was 82UL which is a no go for the 912S and 914. I would like to avoid to be forced to take 100LL. Remi Guerner F-PGKL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=407580#407580 ________________________________ Message 7 _____________________________________ Time: 10:37:48 AM PST US From: "David Joyce" Subject: Re: Europa-List: Re: Sywell LAA Rally 30th Aug to 1st September Remi, In the Uk standard unleaded is 95 RON and probably 90% of petrol cars run on it, as do all our Rotax engines. My 914 has been entirely happy for 10 yrs and numerous friends 912/Ss. My understanding is that Rotax stipulate 95 RON for the 912s and 914, and that 82UL is something quite seperate a special purple oloured leaded Avgas for low compression engines which I have never actually seen.There is up to 5% ethanol in pump Mogas but there is a good chance that Sywell will have got some of the ethanol free petrol still around. Regards, David Joyce, GXSDJ On Tue, 27 Aug 2013 09:29:20 -0700 "Remi Guerner" wrote: > > > Does anyone know what unleaded fuel is available at >Sywell? On the airport website they say MOGAS, without any >detail. Last time I was there the proposed Mogas was 82UL >which is a no go for the 912S and 914. I would like to >avoid to be forced to take 100LL. > Remi Guerner >F-PGKL > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=407580#407580 > > > > > > > >Admin. > > > ________________________________ Message 8 _____________________________________ Time: 01:33:35 PM PST US From: K BURNS Subject: Re: Europa-List: Sywell LAA Rally 30th Aug to 1st September Steve,=0AI am assisting on the EES Aviation stand again this year, we will have a Europa fuselage with us that I am re-building,-converting to Tri-g ear, and stripped back old heavy paint scheme and Richard-re-painted,-l ooking forward to meeting friends old and new.=0A-=0A-=0AKevin=0A =0A =0A________________________________=0A From: Steven Pitt =0ATo: europa-list@matronics.com =0ASent: Tuesday, 27 August 2013, 7:09=0ASubject: Europa-List: Sywell LAA Rally 30th Aug to 1st September=0A orld.com>=0A=0AWith three days to go all is coming together.=0AWe have a pi tch (see the LAA website for the Rally) and the Committee will be on hand t o welcome you all, Europa followers/owners etc. If you are not a member, Me mbership forms will be on hand.=0AThe Club marquee will be pitched although forecasts suggest it will be used for shelter from the sun rather than rai n (let's hope that is accurate).=0AWhilst the Committee have arranged stand rotas anyone able to give an hour or so's help to talk to the public would be welcome.=0AWe are trying to arrange dedicated Europa parking.=0ALight r efreshments will be available and the donation box will be in action.=0A=0A - - - - - - - - - - - - -Matt Dralle, List Admin. ==== ________________________________ Message 9 _____________________________________ Time: 07:23:18 PM PST US Subject: Europa-List: Interior Paint Styled Finish From: Tony Renshaw Gidday, I'm working in the aft cockpit area and am wondering if anyone has found a suitable paint styled finish that I could apply at this stage, to give a light weight but fairly harsh interior. I know of epoxy paints used on the inside of boats, speckled, but this stuff as I recall from the list falls off and or badly abrades and shows wear marks. I'd like to consider something I can just paint on for example the back of the cockpit module down into the wells where the rear tie rod is located. That entire rear area I'd prefer NOT to upholster, and in fact I am thinking about not having any upholstery albeit I appreciate there will be a noise significance. I figure noise cancelling headsets which I will be wearing anyway should negate that, plus I think I am preferring the harsher look rather than plush. I have carbon fibre wrap material, film, that I intend on using over the tunnel and visible areas of the cockpit, once I master how to use this stuff. Will have to steal my wife's hairdryer, a device I absolutely hate the sound of, but, if that is all you need to stretch this film around complex curves, and it has such an interesting finish when done, that I'll suffer it. Thanks in anticipation, and hope. Regards Tony Renshaw Sydney Aussie ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.