Today's Message Index:
----------------------
1. 02:51 PM - Re: Bulkhead Material (Andrew Sarangan)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Bulkhead Material |
Tony
Why are you averse to foam? Lastafoam (I believe is polyurethane)
0.2inch thick should work well for this. Aircraftspruce has it for $36
for a big sheet.
On Wed, Jan 8, 2014 at 6:29 AM, Tony Renshaw <tonyrenshaw268@gmail.com> wrote:
> Hi,
>
> Can someone please remind me of the name of a material I can buy from ACS
> that can be used as a substrate for a small reinforcement bulkhead within a
> wing fairing? I don't mean foam, if someone with a sense of humour might
> suggest, but something cloth on both sides will stick to,well,,and ideally
> is only 1/8-1/4" in thickness.
> Thanks in anticipation.
> Regards
> Tony Renshaw.
> P.S. It's just dawned on me, we have used balsa as such a medium, but I
> think there is a purpose specific board.
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|