---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 01/16/14: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:46 AM - Re: Re: Ducati rectifier/regulators (Trevor Pond) 2. 07:30 AM - Re: Ducati rectifier/regulators (Roland) 3. 08:27 AM - Re: Re: Ducati rectifier/regulators (Trevpond@aol.com) 4. 10:38 PM - Electric Flaps base attachment moves up and down under load (Tony Renshaw) ________________________________ Message 1 _____________________________________ Time: 06:46:58 AM PST US From: Trevor Pond Subject: Re: Europa-List: Re: Ducati rectifier/regulators Hi Roland Did you buy it direct, and is there a mod number for it? Regards Trev GLINN Sent from my iPhone > On 15 Jan 2014, at 18:33, "Roland" wrote: > > > Andy, > > I threw the Ducati out for a Silent Hektik (charges 14,5 V). Works perfectly and is "plug and Play". > > http://www.silent-hektik.com/UL_R_912.htm > > Regards > Roland > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=416951#416951 > > > > > > > > > > ________________________________ Message 2 _____________________________________ Time: 07:30:18 AM PST US Subject: Europa-List: Re: Ducati rectifier/regulators From: "Roland" Hi Trev, I bought it direct from Silent Hektik by order form (costs 197 EUR). No MOD number I'm afraid, although all SH-Products are of top quality. My aircraft is dutch registered. Roland PH-ZTI XS Trigear 914 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=417010#417010 ________________________________ Message 3 _____________________________________ Time: 08:27:18 AM PST US From: Trevpond@aol.com Subject: Re: Europa-List: Re: Ducati rectifier/regulators Thanks Roland. In a message dated 16/01/2014 15:30:31 GMT Standard Time, schmidtroland@web.de writes: --> Europa-List message posted by: "Roland" Hi Trev, I bought it direct from Silent Hektik by order form (costs 197 EUR). No MOD number I'm afraid, although all SH-Products are of top quality. My aircraft is dutch registered. Roland PH-ZTI XS Trigear 914 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=417010#417010 ________________________________ Message 4 _____________________________________ Time: 10:38:09 PM PST US From: Tony Renshaw Subject: Europa-List: Electric Flaps base attachment moves up and down under load Hi, Ive noticed my ply insert for my electric flaps moves up and down. I want the flaps to be obviously rigidly held up, against the mechanical stop in the electric motor, but also for them to be not vibrating too much when fully extended. The floor is pulled up by the actuator being fully retracted, when the flaps are extended, so an aerodynamic load through the flaps will harmonic vibrate the skin basically upward. Im wondering if there would be any benefit in making the floor rigid in this spot, by creating a reinforcement sandwich strap. Ideas kindly accepted. Id much prefer to do it now as I can actually do it with the top off in my good jig (yes, ex you Kingsley). Im even tempted to put in the main gear legs for the tri, because I have such good access at the moment, but Im going taildragger already. The mod I am using was offered up years ago by Bob Berube, of Florida, and it looks like it should go really well, with similar geometry to the original mono wheel. Some have said it might suit a different main gear position, and it does make me wonder if I should set up the ply inserts in the back seat footwells, as I call them. Anyone got an estimate of how long it would take to put in the inserts and what theyd weigh to carry round? Lastly, is there a 3D laser styled device you can wander around the inside of the footwells that will create a 3 D image of them, in relation to each other, such that you could then create a very tight ply insert if you could mill it out with something. It just frustrates me the number of times Id like some sort of 3D pattern maker. If something like this exists, what are they called and does anyone know whether you could do such a thing? I know its probably bigger than Ben-Hur but one day it wont be. Regards Tony Renshaw Sydney ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.