---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sat 04/05/14: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:58 AM - Re: Sealant, mastic and Firewall crossing (Max Cointe (Free)) 2. 11:27 AM - Post Curing (Fred Klein) 3. 12:11 PM - Re: Sun n Fun (goff) 4. 12:11 PM - Re: Post Curing (spcialeffects) 5. 12:11 PM - Re: Post Curing (Robert Borger) 6. 12:13 PM - Re: Re: Sun n Fun (Greg Fuchs) 7. 12:24 PM - Re: Post Curing (Fred Klein) ________________________________ Message 1 _____________________________________ Time: 07:58:23 AM PST US From: "Max Cointe (Free)" Subject: RE: Europa-List: Sealant, mastic and Firewall crossing Nigel, absolutely many thanks! Max Cointe mcointe@free.fr F-PMLH Europa XS_TriGear Kit #560-2003 912ULS/AirmasterAP332 490 hours F-PLDJ DynAro MCR 4S Kit #27-2002 912ULSFR/MTProp MTV7A 1600 heures -----Message d'origine----- De: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] De la part de Nigel Graham Envoy: vendredi 4 avril 2014 19:15 : europa-list@matronics.com Objet: Re: Europa-List: Sealant, mastic and Firewall crossing Was it this one Max? Nigel On 04/04/2014 17:51, max8992 wrote: > > Hi There All, > I saw sometime ago a very good report on trials made on sealant and on > mastic used on firewall, but can't remember where it was (and even if it was on this forum...) Someone sees what I mean? > > -------- > Max8992 > Europa XS #560 F-PMLH > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=421560#421560 > > ________________________________ Message 2 _____________________________________ Time: 11:27:23 AM PST US From: Fred Klein Subject: Europa-List: Post Curing Good morning Gents, Somewhat belatedly, I need to do the post-curing processlooking at the XS manual, I was surprised to find instructions which APPEAR to limit the need for post-curing on the XS model to the flaps, ailerons, rudder, horizontal tail planes and anti-servo tabs. I had thought that the ENTIRE wings and fuselage also needed to be post-curedAm I mistaken? comments and answers most appreciated, Fred ________________________________ Message 3 _____________________________________ Time: 12:11:03 PM PST US Subject: Europa-List: Re: Sun n Fun From: "goff" Bravo to Bud. Well deserved. Goff Read this topic online here: http://forums.matronics.com/viewtopic.php?p=421592#421592 ________________________________ Message 4 _____________________________________ Time: 12:11:03 PM PST US Subject: Europa-List: Re: Post Curing From: "spcialeffects" Hi Fred, I'm sure it's only the flying surfaces that you have done the glass work on that need the post curing on to further strengthen their structure. For me building the classic wings I had to include the complete wing into my "oven". In fact on the video that's on the europa clubs web site ( it's the one that's in 3 parts ) when they talk about making the kit I'm sure they tell you that the fuselage is vacuum bagged and oven cured. Hope this helps. Frank Read this topic online here: http://forums.matronics.com/viewtopic.php?p=421591#421591 ________________________________ Message 5 _____________________________________ Time: 12:11:09 PM PST US Subject: Re: Europa-List: Post Curing From: Robert Borger Fred, Only the control surfaces need post-curing. The wings and fuselage should have been done by the factory. Blue skies & tailwinds, Bob Borger Europa XS Tri, Rotax 914, Airmaster C/S Prop (50 hrs). Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP 3705 Lynchburg Dr. Corinth, TX 76208-5331 Cel: 817-992-1117 rlborger@mac.com On Apr 5, 2014, at 1:26 PM, Fred Klein wrote: Good morning Gents, Somewhat belatedly, I need to do the post-curing processlooking at the XS manual, I was surprised to find instructions which APPEAR to limit the need for post-curing on the XS model to the flaps, ailerons, rudder, horizontal tail planes and anti-servo tabs. I had thought that the ENTIRE wings and fuselage also needed to be post-curedAm I mistaken? comments and answers most appreciated, Fred ________________________________ Message 6 _____________________________________ Time: 12:13:49 PM PST US From: "Greg Fuchs " Subject: RE: Europa-List: Re: Sun n Fun Congratulations Bud, there certainly have been MANY people that you have helped out on this web site as well! _____ .... Yesterday, on behalf of the Europa Club committee, I was delighted to award Bud Yerly with the Cliff and Betty Shaw Trophy for outstanding support for the Europa family around the world and especially in the Americas. ________________________________ Message 7 _____________________________________ Time: 12:24:18 PM PST US From: Fred Klein Subject: Re: Europa-List: Post Curing On Apr 5, 2014, at 12:10 PM, Robert Borger wrote: > Only the control surfaces need post-curing. Thanks Bob=85confirmation much appreciated=85F. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.