---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 04/06/14: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:08 AM - Re: Post Curing (GRAHAM SINGLETON) 2. 09:30 AM - Re: Post Curing (Paul McAllister) 3. 09:42 AM - Re: Post Curing (William Daniell) 4. 09:55 AM - Re: Post Curing (Gerry Holland) 5. 05:30 PM - Parcel Shelf tray door access for fuses, CBS (Tony Renshaw) 6. 05:53 PM - Re: Sun n Fun (Troy Maynor) 7. 06:02 PM - Re: Parcel Shelf tray door access for fuses, CBS (rparigor@suffolk.lib.ny.us) ________________________________ Message 1 _____________________________________ Time: 03:08:23 AM PST US From: GRAHAM SINGLETON Subject: Re: Europa-List: Post Curing Just to add to that, anything made by hand layup. Be careful not to overhea t the faom, it will expand!=0AGraham=0A=0A=0A=0A=0A________________________ ________=0A From: Fred Klein =0ATo: europa-list@mat ronics.com =0ASent: Saturday, 5 April 2014, 20:23=0ASubject: Re: Europa-Lis t: Post Curing=0A =0A=0A=0A=0A=0AOn Apr 5, 2014, at 12:10 PM, Robert Borger wrote:=0A=0AOnly the control surfaces need post-curing. =C2-=0A=0AThanks Bobconfirmation much appreciatedF.=0A ============= ________________________________ Message 2 _____________________________________ Time: 09:30:54 AM PST US From: "Paul McAllister" Subject: RE: Europa-List: Post Curing Been there, done that :( From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of GRAHAM SINGLETON Sent: Sunday, April 6, 2014 4:57 AM Subject: Re: Europa-List: Post Curing Just to add to that, anything made by hand layup. Be careful not to overheat the faom, it will expand! Graham ________________________________ Message 3 _____________________________________ Time: 09:42:49 AM PST US Subject: Re: Europa-List: Post Curing From: William Daniell Aircraft spruce do a thermostat thingy to put in line to an electric heater Will William Daniell LONGPORT +57 310 295 0744 On Sun, Apr 6, 2014 at 11:26 AM, Paul McAllister wrote: > Been there, done that L > > > *From:* owner-europa-list-server@matronics.com [mailto: > owner-europa-list-server@matronics.com] *On Behalf Of *GRAHAM SINGLETON > *Sent:* Sunday, April 6, 2014 4:57 AM > *To:* europa-list@matronics.com > *Subject:* Re: Europa-List: Post Curing > > > Just to add to that, anything made by hand layup. Be careful not to > overheat the faom, it will expand! > Graham > > > * > > > * > > ________________________________ Message 4 _____________________________________ Time: 09:55:20 AM PST US From: Gerry Holland Subject: Re: Europa-List: Post Curing The other consideration beyond heating control is the air circulation within the oven. Make sure the hot air moves to all areas by addition of fans. Mine were incorporated into door as I recall. Still managed to get an Aileron end to explode. Probably due to air pocket in lay up so good it happened. It's fibre glass so repairs are easy.... Gerry ________________________________ Message 5 _____________________________________ Time: 05:30:14 PM PST US Subject: Europa-List: Parcel Shelf tray door access for fuses, CBS From: Tony Renshaw Gidday, Whilst working on my panel I was wondering if anyone has buried their fuses in a hatch within the parcel shelf? Sure, it wouldn't be accessible, but, if you didn't plan on gaining access and built the aircraft accordingly, maybe within the parcel shelf floor might be a good little location? Any thoughts? Regards Tony Renshaw Sent from my iPad ________________________________ Message 6 _____________________________________ Time: 05:53:27 PM PST US Subject: Europa-List: Re: Sun n Fun From: "Troy Maynor" Congratulations to Bud Yerly. Bud clearly deserves the honor of the gold cup for all the support he gives to the Europa builders and flyers here in the US. Without Bud at the helm here in the US, I would feel very isolated as a flyer and if I were still a builder I'd feel even more lost. He has helped me a lot over the years. It was nice to see him, meet his lovely wife Anita, and see all the other Europa folks at Sun N Fun 2014. Sorry I missed some of you. It was a pleasant surprise to see Ivan Shaw again after so many years. I still remember well the intro ride he gave me at Sun N Fun 1997 where he did an loop and roll in "ELSA" the second Europa built. I was sold on this Graceful bird. To date, I now have 240 hours on "Lil Grace". Read this topic online here: http://forums.matronics.com/viewtopic.php?p=421654#421654 Attachments: http://forums.matronics.com//files/ivan_shaw_and_troy_maynor_686.jpg ________________________________ Message 7 _____________________________________ Time: 06:02:09 PM PST US Subject: Re: Europa-List: Parcel Shelf tray door access for fuses, CBS From: rparigor@suffolk.lib.ny.us Hi Tony You can have a look through my 3 pages of instrument module: http://www.europaowners.org/main.php?g2_itemId=27305 I have a sub panel that has fuses. Ron Parigoris ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.