Today's Message Index:
----------------------
1. 03:51 AM - Re: Noisy Comm Radio (Troy Maynor)
2. 09:04 AM - Swageing tool (Richard Holder)
3. 09:20 AM - Re: Swageing tool (David Watts)
4. 10:21 AM - Re: Swageing tool (Richard Holder)
5. 10:51 AM - facebook or twitter (g-fizy)
6. 10:55 AM - Italy trip (David Joyce)
7. 10:59 AM - Re: facebook or twitter (David Joyce)
8. 11:03 AM - Re: facebook or twitter (Fred Klein)
9. 11:09 AM - Re: facebook or twitter (Peter Zutrauen)
10. 11:13 AM - Re: facebook or twitter (houlihan)
11. 11:15 AM - Re: facebook or twitter (g-fizy)
12. 11:23 AM - Re: facebook or twitter (g-fizy)
13. 11:30 AM - Re: facebook or twitter (Jeremy Fisher)
14. 11:47 AM - Re: facebook or twitter (Robert Borger)
15. 11:50 AM - Re: rubber anti-vibration mounts MT04 (jpg12305)
16. 11:55 AM - Re: facebook or twitter (Robert Borger)
17. 11:59 AM - Re: facebook or twitter (Ray fitton)
18. 12:00 PM - Re: facebook or twitter (Peter Zutrauen)
19. 12:16 PM - Re: facebook or twitter (Richard Holder)
20. 12:28 PM - =?utf-8?Q?Re:__facebook_or_twitter? ()
21. 12:49 PM - Re: facebook or twitter (Christoph Both)
22. 12:56 PM - thottle gadget thingy (William Daniell)
23. 12:58 PM - Re: Re: facebook or twitter (Tony Renshaw)
24. 01:12 PM - Re: facebook or twitter (Pete)
25. 02:00 PM - Re: thottle gadget thingy NOW Rudder cable firewall penetration (Rob Housman)
26. 02:04 PM - Re: thottle gadget thingy (rparigor@suffolk.lib.ny.us)
27. 02:10 PM - Re: facebook or twitter (Pete Lawless)
28. 02:21 PM - Re: thottle gadget thingy NOW Rudder cable firewall penetration (William Daniell)
29. 02:22 PM - Re: thottle gadget thingy (William Daniell)
30. 03:55 PM - Re: thottle gadget thingy NOW Rudder cable firewall penetration (rparigor@suffolk.lib.ny.us)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Noisy Comm Radio |
I tried all the things suggested except the SWR check...no access to one yet. It
made no difference running the Ipad and Stratus on self batteries. I check the
integrity of all grounds and coax connections that were accessable. I did think
I momentarily showed a short center to shield when I had my meter on the
male pin in the back of the radio rack but could not repeat it. So now I have
the panel at home in my garage. I built in such a way to have it out of the plane
in about 30 minutes.
I am planning to replace the RG58 with RG400 from the radio rack to the Bob Archer
antenna on the port bulkhead aft.
So my questions now are:
1. Should I put ferrite torroids on both my electric attitude ind. and turn coord.
power wires? What other consumers would need torroids on their power feed...engine
monitor? AOA system? Transponder? other?
2. Should I run a separate ground wire from the radio to the battery itself. Currently
it is on one of the Bob Nuckoll's 20 or 30 point grounding strips connected
to the negative battery cable inside the panel and would seem useless to
run another wire to the same place anyway but maybe it would help. I do have
one more spare pin on a connector to get thru the firewall of about a 20 gage
wire size.
3. The Sigtronics intercom wires weren't shielded. Do they need to be wrapped up
in some kind of shield foil or braid?
I just want to "carpet bomb" anything that could contibute to noise, static, cross
interference while I've got the panel out.
I am also trying to find a new 90 degree coax fitting that fits the ICOM rack.
I may be able to just reuse the one there now.
Thank you so much for your responses.
Troy
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=422876#422876
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hi Team
My aircraft needs a new rudder cable. I have all the
parts, but I don't have the swageing tool.
Is there some kind person out there who could lend me one
for a couple of weeks ?
Very happy to pay postage or collect - I am between
Stansted and Luton.
TIA
Richard Holder
G-OWWW
High Cross
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Swageing tool |
Richard
I have a spare one that I was recently given, so you are more than welcome to have
it for good. Let me know where to send it.
Dave
> On 6 May 2014, at 17:03, Richard Holder <richard.holder@outlook.com> wrote:
>
>
> Hi Team
>
> My aircraft needs a new rudder cable. I have all the parts, but I don't have
the swageing tool.
>
> Is there some kind person out there who could lend me one for a couple of weeks
?
>
> Very happy to pay postage or collect - I am between Stansted and Luton.
>
> TIA
>
> Richard Holder
> G-OWWW
> High Cross
>
>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Swageing tool |
On 06/05/2014 17:19, David Watts wrote:
> Richard
>
> I have a spare one that I was recently given, so you are more than welcome to
have it for good. Let me know where to send it.
>
> Dave
What a star ! Thank you very much.
Fantastic instant response.
Richard Holder
Bell House
Bell Lane
Widford
Ware
Herts
SG12 8SH
Look forward to meeting up at Laddingford soon.
Richard
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | facebook or twitter |
Can i just throw a thought out to you all ,should we move to facebook or twitter
,, I am not a big fan of this old style forum ,,perhaps we could bring this
up at the AGM :-)
regards jim davis
--------
owner g-fizy
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=422895#422895
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Dear All, Because of unanticipated domestic demands and in
the light of the already fairly full Europa Trips program,
I am thinking of dropping the Italian trip from this
year's program. If any of you were really looking forward
to it, do get in touch and I will consider rearranging it
at a different time.
Regards, David Joyce, G-XSDJ, EC Trips organiser.
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
Jim, I for one would be reluctant. I have a number of
other roles/relationships which take me onto email at
least once a day, whereas I never go onto Facebook or
Twitter unless someone posts a link to something like a
video there. It is no doubt part of being a bit of an old
F**t but I guess that a high proportion of Europa builders
and flyers are post retirement age. Regards, David Joyce
On Tue, 6 May 2014 10:50:29 -0700
"g-fizy" <jim.davis1@me.com> wrote:
><jim.davis1@me.com>
>
> Can i just throw a thought out to you all ,should we
>move to facebook or twitter ,, I am not a big fan of this
>old style forum ,,perhaps we could bring this up at the
>AGM :-)
>
> regards jim davis
>
> --------
> owner g-fizy
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=422895#422895
>
>
>
>
>
>
>
>Un/Subscription,
>Forums!
>Admin.
>
>
>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
Jim,
Are there limitations to a list-serve which are overcome in the FB medium?
>> I am not a big fan of this old style forum
What exactly dont you like about the list-serve?
Is this list-serve broken?If not
Fred
On May 6, 2014, at 10:50 AM, g-fizy <jim.davis1@me.com> wrote:
>
> Can i just throw a thought out to you all ,should we move to facebook or twitter
,, I am not a big fan of this old style forum ,,perhaps we could bring this
up at the AGM :-)
>
> regards jim davis
>
> --------
> owner g-fizy
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=422895#422895
>
>
>
>
>
>
>
>
>
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
Of the two, twitter has my vote, (I dislike facebook - much too
cumbersome). That said, old style email works great for me, as it's easy
to access anywhere, and it is archived for searching before broadcasting a
question :)
Cheers,
Pete
On Tue, May 6, 2014 at 1:50 PM, g-fizy <jim.davis1@me.com> wrote:
>
> Can i just throw a thought out to you all ,should we move to facebook or
> twitter ,, I am not a big fan of this old style forum ,,perhaps we could
> bring this up at the AGM :-)
>
> regards jim davis
>
> --------
> owner g-fizy
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=422895#422895
>
>
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
Why ?
What are the advantages of moving ?
Tim
On 6 May 2014 18:50, g-fizy <jim.davis1@me.com> wrote:
>
> Can i just throw a thought out to you all ,should we move to facebook or
> twitter ,, I am not a big fan of this old style forum ,,perhaps we could
> bring this up at the AGM :-)
>
> regards jim davis
>
> --------
> owner g-fizy
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=422895#422895
>
>
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
thanks david for making me feel young lol but im not that far behind you in the
age game ,my mind thinks young but my body says your too old for that
davidjoyce(at)doctors.org wrote:
> Jim, I for one would be reluctant. I have a number of
> other roles/relationships which take me onto email at
> least once a day, whereas I never go onto Facebook or
> Twitter unless someone posts a link to something like a
> video there. It is no doubt part of being a bit of an old
> F**t but I guess that a high proportion of Europa builders
> and flyers are post retirement age. Regards, David Joyce
>
>
> On Tue, 6 May 2014 10:50:29 -0700
> "g-fizy" wrote:
>
> >
> >
> >
> > Can i just throw a thought out to you all ,should we
> > move to facebook or twitter ,, I am not a big fan of this
> > old style forum ,,perhaps we could bring this up at the
> > AGM :-)
> >
> > regards jim davis
> >
> > --------
> > owner g-fizy
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=422895#422895
> >
> >
> >
> >
> >
> >
> >
> > Un/Subscription,
> > Forums!
> > Admin.
> >
> >
> >
> >
> >
>
--------
owner g-fizy
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=422902#422902
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
hi fred ,I dislike the system ,often nothing is formatted correctly ,sometimes
if their are a lot of messages its hard work to read ,,ok perhaps my fault for
using iphone/ipad but i never need a pc also if you want to search i can only
look at lists ,mite just be me
but i follow lots of clubs and airfields on twitter and facebook and its just a
easy way of saying hi or i was here and here is a pic
Fred Klein wrote:
> Jim,
>
> Are there limitations to a list-serve which are overcome in the FB medium?
>
>
> > > I am not a big fan of this old style forum
> >
> >
>
> What exactly dont you like about the list-serve?
>
> Is this list-serve broken?If not
>
> Fred
>
> On May 6, 2014, at 10:50 AM, g-fizy wrote:
>
>
> >
> >
> > Can i just throw a thought out to you all ,should we move to facebook or twitter
,, I am not a big fan of this old style forum ,,perhaps we could bring
this up at the AGM :-)
> >
> > regards jim davis
> >
> > --------
> > owner g-fizy
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=422895#422895
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
--------
owner g-fizy
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=422903#422903
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
I for one would not use a Facebook or Twitter list system. I do not like either
of them! I vote to keep the current system.
Jerry Fisher
On May 6, 2014, at 1:50 PM, g-fizy wrote:
>
> Can i just throw a thought out to you all ,should we move to facebook or twitter
,, I am not a big fan of this old style forum ,,perhaps we could bring this
up at the AGM :-)
>
> regards jim davis
>
> --------
> owner g-fizy
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=422895#422895
>
>
>
>
>
>
>
>
>
>
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
Jim & other Europaphiles,=0A=0APersonally, I'm quite happy with the list s
erver version and am loath to clutter up my Facebook with this quantity of
messaging. =C2-And I don't particularly care for Twitter in any case. =C2
-=0A=0AJust my 2 cents (pence, centieuro, etc., pick your currency) wort
h.=0ABlue skies & tailwinds,=0ABob Borger=0AEuropa XS Tri, Rotax 914 w/ In
tercooler & Airmaster C/S Prop=0ALittle Toot Sport Biplane, Lycoming AEIO-
320 EXP=0A3705 Lynchburg Dr.=0ACorinth, TX 76208-5331=0AH: 940-497-2123=0A
C: 817-992-1117=0A=0AOn May 06, 2014, at 12:50 PM, g-fizy <jim.davis1@me.c
<jim.davis1@me.com =C2- =C2->=0A=0ACan i just throw a thought out to y
ou all ,should we move to facebook or twitter ,, I am not a big fan of thi
s old style forum ,,perhaps we could bring this up at the AGM :-) =0A=0Are
gards jim davis=0A=0A--------=0Aowner g-fizy=0A=0A=0A=0A=0ARead this topic
online here:=0A=0Ahttp://forums.matronics.com/viewtopic.php?p=422895#42
====0A=0A=0A=0A
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: rubber anti-vibration mounts MT04 |
Max,
Simply contact Europa.... They were out of stock two months ago, but they should
normally have the MT04 ref.
Jean-Paul
LFEF
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=422906#422906
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
Jim,=0A=0AMust be setup issues with your iPhone/iPad. =C2-I'm primarily
a Mac user. =C2-I use iPhone, iPad, Mac, MacBook & Windoze (as this is b
eing written) and have no issues with any. =C2-Well, that was almost cor
rect. =C2-Windoze/IE has caused problems but Windoze/Chrome seems to wor
k just fine. =C2-I'd bet that Windoze/FireFox would be OK as well. =C2-
If you want to contact me off-forum, I'd be glad to try and go through var
ious setups to see if any help.=0ABlue skies & tailwinds,=0ABob Borger=0AE
uropa XS Tri, Rotax 914 w/ Intercooler & Airmaster C/S Prop=0ALittle Toot
Sport Biplane, Lycoming AEIO-320 EXP=0A3705 Lynchburg Dr.=0ACorinth, TX 76
208-5331=0AH: 940-497-2123=0AC: 817-992-1117=0A=0AOn May 06, 2014, at 01:2
3 PM, g-fizy <jim.davis1@me.com> wrote:=0A=0A-- =C2- =C2-> Europa-List
message posted by: "g-fizy" <jim.davis1@me.com =C2- =C2->=0A=0Ahi fre
d ,I dislike the system ,often nothing is formatted correctly ,sometimes i
f their are a lot of messages its hard work to read ,,ok perhaps my fault
for using iphone/ipad but i never need a pc also if you want to search i c
an only look at lists ,mite just be me =0A=0Abut i follow lots of clubs an
d airfields on twitter and facebook and its just a easy way of saying hi o
r i was here and here is a pic =0A=0A=0A
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
A europa list on facebook for images and stuff maybe handy
Ray
------Original Message------
From: Jeremy Fisher
Sender: owner-europa-list-server@matronics.com
ReplyTo: europa-list@matronics.com
Subject: Re: Europa-List: facebook or twitter
Sent: 6 May 2014 19:30
I for one would not use a Facebook or Twitter list system. I do not like either
of them! I vote to keep the current system.
Jerry Fisher
On May 6, 2014, at 1:50 PM, g-fizy wrote:
>
> Can i just throw a thought out to you all ,should we move to facebook or twitter
,, I am not a big fan of this old style forum ,,perhaps we could bring this
up at the AGM :-)
>
> regards jim davis
>
> --------
> owner g-fizy
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=422895#422895
>
>
>
>
>
>
>
>
>
>
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
phew.... I'm quite partial to the current email paradigm, so am relieved to
see its overwhelming support :-)
Cheers,
Pete
On Tue, May 6, 2014 at 2:46 PM, Robert Borger <rlborger@mac.com> wrote:
> Jim & other Europaphiles,
>
> Personally, I'm quite happy with the list server version and am loath to
> clutter up my Facebook with this quantity of messaging. And I don't
> particularly care for Twitter in any case.
>
> Just my 2 cents (pence, centieuro, etc., pick your currency) worth.
>
>
> Blue skies & tailwinds,
> Bob Borger
> Europa XS Tri, Rotax 914 w/ Intercooler & Airmaster C/S Prop
> Little Toot Sport Biplane, Lycoming AEIO-320 EXP
> 3705 Lynchburg Dr.
> Corinth, TX 76208-5331
> H: 940-497-2123
> C: 817-992-1117
>
>
> On May 06, 2014, at 12:50 PM, g-fizy <jim.davis1@me.com> wrote:
>
>
> Can i just throw a thought out to you all ,should we move to facebook or
> twitter ,, I am not a big fan of this old style forum ,,perhaps we could
> bring this up at the AGM :-)
>
> regards jim davis
>
> --------
> owner g-fizy
>
>
> Read this topic online here:
>
> http://forums.matronics.www.matronics.com/Navigator?Europa-List"
> data-mce-href="http://www.matronics.com/Navigator?Europa-List">http://www.matronics.com/Navigator?Europa-/forums.matronics.com"
> data-mce-href="http://forums.matronics.com">http:=======================
> http://www.matronics.com/c================
>
>
> <http://forums.matronics.com/viewtopic.php?p=422895#422895>
>
>
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
On 06/05/2014 19:30, Jeremy Fisher wrote:
> I for one would not use a Facebook or Twitter list
> system. I do not like either of them! I vote to keep
> the current system.
> Jerry Fisher
Me too
Richard Holder
G-OWWW
High Cross
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: f-8?Q?Re:_Europa-List:_facebook_or_twitter? |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 21
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
Keep email.
Christoph Both
#223
Wolfville, Nova Scotia
From: Peter Zutrauen <peterz@zutrasoft.com<mailto:peterz@zutrasoft.com>>
ropa-list@matronics.com<mailto:europa-list@matronics.com>>
>>
Subject: Re: Europa-List: facebook or twitter
phew.... I'm quite partial to the current email paradigm, so am relieved to
see its overwhelming support :-)
Cheers,
Pete
On Tue, May 6, 2014 at 2:46 PM, Robert Borger <rlborger@mac.com<mailto:rlbo
rger@mac.com>> wrote:
Jim & other Europaphiles,
Personally, I'm quite happy with the list server version and am loath to cl
utter up my Facebook with this quantity of messaging. And I don't particul
arly care for Twitter in any case.
Just my 2 cents (pence, centieuro, etc., pick your currency) worth.
Blue skies & tailwinds,
Bob Borger
Europa XS Tri, Rotax 914 w/ Intercooler & Airmaster C/S Prop
Little Toot Sport Biplane, Lycoming AEIO-320 EXP
3705 Lynchburg Dr.
Corinth, TX 76208-5331
H: 940-497-2123<tel:940-497-2123>
C: 817-992-1117<tel:817-992-1117>
On May 06, 2014, at 12:50 PM, g-fizy <jim.davis1@me.com<mailto:jim.davis1@m
e.com>> wrote:
im.davis1@me.com> >
Can i just throw a thought out to you all ,should we move to facebook or tw
itter ,, I am not a big fan of this old style forum ,,perhaps we could brin
g this up at the AGM :-)
regards jim davis
--------
owner g-fizy
Read this topic online here:
http://forums.matronics.www.matronics.com/Navigator?Europa-List" data-mce-h
ref="http://www.matronics.com/Navigator?Europa-List">http://www.matronics
.com/Navigator?Europa-/forums.matronics.com" data-mce-href="http://forums
.matronics.com">http:==================
======http://www.matronics.com/c==========
======
<http://forums.matronics.com/viewtopic.php?p=422895#422895>
Message 22
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | thottle gadget thingy |
I am totally stumped by the throttle thingy...what i am thinking is
supposed to happen is that the throttle lever is supposed to move but at
least the metal washers are supposed to stay still.
try as I might i cant make the washers stop rotating and as a result it has
a tendency to undo the nut holding everything together.
What did anyone else do?
Also in a twofer what about the holes in the firewall for the rudder
cables? how are these sealed?
thanks Will
PS this would not be possible on twitter i believe because it only permits
120 characters I believe
William Daniell
LONGPORT
+57 310 295 0744
Message 23
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
Crazy idea. Matronics is a mature system, has all sorts of search options, and
in my view would be change for changes sake.
TR
On 7 May 2014, at 4:15 am, g-fizy <jim.davis1@me.com> wrote:
>
> thanks david for making me feel young lol but im not that far behind you in the
age game ,my mind thinks young but my body says your too old for that
>
>
>
>
> davidjoyce(at)doctors.org wrote:
>> Jim, I for one would be reluctant. I have a number of
>> other roles/relationships which take me onto email at
>> least once a day, whereas I never go onto Facebook or
>> Twitter unless someone posts a link to something like a
>> video there. It is no doubt part of being a bit of an old
>> F**t but I guess that a high proportion of Europa builders
>> and flyers are post retirement age. Regards, David Joyce
>>
>>
>> On Tue, 6 May 2014 10:50:29 -0700
>> "g-fizy" wrote:
>>
>>>
>>>
>>>
>>> Can i just throw a thought out to you all ,should we
>>> move to facebook or twitter ,, I am not a big fan of this
>>> old style forum ,,perhaps we could bring this up at the
>>> AGM :-)
>>>
>>> regards jim davis
>>>
>>> --------
>>> owner g-fizy
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=422895#422895
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Un/Subscription,
>>> Forums!
>>> Admin.
>>>
>>>
>>>
>>>
>>>
>>
>
>
> --------
> owner g-fizy
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=422902#422902
>
>
>
>
>
>
>
>
>
>
Message 24
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
We already have a great site with *loads* of pics..... And the more the merr
ier! :-)
http://europaowners.org/main.php
> On May 6, 2014, at 2:58 PM, "Ray fitton" <rayfitton@virginmedia.com> wrote
:
>
>
>
> A europa list on facebook for images and stuff maybe handy
>
> Ray
>
> ------Original Message------
> From: Jeremy Fisher
> Sender: owner-europa-list-server@matronics.com
> To: europa-list@matronics.com
> ReplyTo: europa-list@matronics.com
> Subject: Re: Europa-List: facebook or twitter
> Sent: 6 May 2014 19:30
>
>
> I for one would not use a Facebook or Twitter list system. I do not like e
ither of them! I vote to keep the current system.
>
> Jerry Fisher
>> On May 6, 2014, at 1:50 PM, g-fizy wrote:
>>
>>
>> Can i just throw a thought out to you all ,should we move to facebook or t
witter ,, I am not a big fan of this old style forum ,,perhaps we could brin
g this up at the AGM :-)
>>
>> regards jim davis
>>
>> --------
>> owner g-fizy
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=422895#422895
>
>
>
>
>
>
>
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
>
>
Message 25
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | thottle gadget thingy NOW Rudder cable firewall penetration |
Good question, Will.
I too have contemplated what to do about the gaping holes for the rudder
cables. I have yet to come up with a solution, though perhaps a
modification that uses a short push rod in a bushing through the
firewall would mitigate the problem. Otherwise the firewall is the
equivalent of crossing your fingers and making a wish that you
won=99t have flames in the center tunnel.
Has anyone addressed this?
Best regards,
Rob Housman
Irvine, California
Europa XS
Rotax 914
S/N A070
Airframe complete
Avionics in progress
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of William
Daniell
Sent: Tuesday, May 06, 2014 12:54 PM
Subject: Europa-List: thottle gadget thingy
I am totally stumped by the throttle thingy...what i am thinking is
supposed to happen is that the throttle lever is supposed to move but at
least the metal washers are supposed to stay still.
try as I might i cant make the washers stop rotating and as a result it
has a tendency to undo the nut holding everything together.
What did anyone else do?
Also in a twofer what about the holes in the firewall for the rudder
cables? how are these sealed?
thanks Will
PS this would not be possible on twitter i believe because it only
permits 120 characters I believe
William Daniell
LONGPORT
+57 310 295 0744
Message 26
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: thottle gadget thingy |
Hi William
I had the same problem, welded a nut to fender washer and JB Welded to
housing.
You should be able to find more details here::
http://www.europaowners.org/main.php?g2_itemId=29497
Ron Parigoris
Message 27
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: facebook or twitter |
Evening All
Add me to the wont use Twitter or Facebook list.
Pete
On 06/05/14 21:10, Pete wrote:
> We already have a great site with *loads* of pics..... And the more
> the merrier! :-)
>
> http://europaowners.org/main.php
>
> On May 6, 2014, at 2:58 PM, "Ray fitton" <rayfitton@virginmedia.com
> <mailto:rayfitton@virginmedia.com>> wrote:
>
>> <rayfitton@virginmedia.com <mailto:rayfitton@virginmedia.com>>
>>
>> A europa list on facebook for images and stuff maybe handy
>>
>> Ray
>>
>> ------Original Message------
>> From: Jeremy Fisher
>> Sender: owner-europa-list-server@matronics.com
>> <mailto:owner-europa-list-server@matronics.com>
>> To: europa-list@matronics.com <mailto:europa-list@matronics.com>
>> ReplyTo: europa-list@matronics.com <mailto:europa-list@matronics.com>
>> Subject: Re: Europa-List: facebook or twitter
>> Sent: 6 May 2014 19:30
>>
>> <mailto:jffisher@gmail.com>>
>>
>> I for one would not use a Facebook or Twitter list system. I do not
>> like either of them! I vote to keep the current system.
>>
>> Jerry Fisher
>> On May 6, 2014, at 1:50 PM, g-fizy wrote:
>>
>>> <mailto:jim.davis1@me.com>>
>>>
>>> Can i just throw a thought out to you all ,should we move to
>>> facebook or twitter ,, I am not a big fan of this old style forum
>>> ,,perhaps we could bring this up at the AGM :-)
>>>
>>> regards jim davis
>>>
>>> --------
>>> owner g-fizy
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=422895#422895
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> http://www.matronics.com/Navigator?Europa-List
>>
>> _ &n-->
>> http://www.matronic================================================
>> <http://www.matronics.com/contribution>
>>
>>
>>
>> <http://www.matronics.com/contribution>
> <http://www.matronics.com/contribution>
> *
>
>
> *
Message 28
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: thottle gadget thingy NOW Rudder cable firewall penetration |
=8Bis crossed fingers an approved mod i wonder? :-)
It really makes one wonder about all the sealing etc mentioned in the manua
l
Will
=8B
William Daniell
LONGPORT
+57 310 295 0744
On Tue, May 6, 2014 at 4:00 PM, Rob Housman <rob@hyperion-ef.com> wrote:
> Good question, Will.
>
>
> I too have contemplated what to do about the gaping holes for the rudder
> cables. I have yet to come up with a solution, though perhaps a
> modification that uses a short push rod in a bushing through the firewall
> would mitigate the problem. Otherwise the firewall is the equivalent of
> crossing your fingers and making a wish that you won=99t have flame
s in the
> center tunnel.
>
>
> Has anyone addressed this?
>
>
> Best regards,
>
>
> Rob Housman
>
> Irvine, California
>
> Europa XS
>
> Rotax 914
>
> S/N A070
>
> Airframe complete
>
> Avionics in progress
>
>
> *From:* owner-europa-list-server@matronics.com [mailto:
> owner-europa-list-server@matronics.com] *On Behalf Of *William Daniell
> *Sent:* Tuesday, May 06, 2014 12:54 PM
> *To:* europa-list@matronics.com
> *Subject:* Europa-List: thottle gadget thingy
>
>
> I am totally stumped by the throttle thingy...what i am thinking is
> supposed to happen is that the throttle lever is supposed to move but at
> least the metal washers are supposed to stay still.
>
>
> try as I might i cant make the washers stop rotating and as a result it
> has a tendency to undo the nut holding everything together.
>
>
> What did anyone else do?
>
>
> Also in a twofer what about the holes in the firewall for the rudder
> cables? how are these sealed?
>
>
> thanks Will
>
>
> PS this would not be possible on twitter i believe because it only permit
s
> 120 characters I believe
>
>
> William Daniell
>
> LONGPORT
>
> +57 310 295 0744
>
>
> *http://www.matronics.com/Navigator?Europa-List <http://www.matronics.com
/Navigator?Europa-List>*
>
> *http://forums.matronics.com <http://forums.matronics.com>*
>
> *http://www.matronics.com/contribution <http://www.matronics.com/contribu
tion>*
>
>
> *
>
===========
tronics.com/Navigator?Europa-List>
===========
===========
om/contribution>
===========
>
> *
>
>
Message 29
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: thottle gadget thingy |
thanks ron
the *&5$ing thing was driving me mad
Will
William Daniell
LONGPORT
+57 310 295 0744
On Tue, May 6, 2014 at 4:03 PM, <rparigor@suffolk.lib.ny.us> wrote:
> Hi William
>
> I had the same problem, welded a nut to fender washer and JB Welded to
> housing.
>
> You should be able to find more details here::
>
> http://www.europaowners.org/main.php?g2_itemId=29497
>
> Ron Parigoris
>
> *
>
>
> *
>
>
Message 30
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: thottle gadget thingy NOW Rudder cable firewall penetration |
Hi Rob
"I too have contemplated what to do about the gaping holes for the
rudder cables"
Here's how i dealt with the holes:
http://www.europaowners.org/main.php?g2_itemId=27732
Ron Parigoris
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|