---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 05/06/14: 30 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:51 AM - Re: Noisy Comm Radio (Troy Maynor) 2. 09:04 AM - Swageing tool (Richard Holder) 3. 09:20 AM - Re: Swageing tool (David Watts) 4. 10:21 AM - Re: Swageing tool (Richard Holder) 5. 10:51 AM - facebook or twitter (g-fizy) 6. 10:55 AM - Italy trip (David Joyce) 7. 10:59 AM - Re: facebook or twitter (David Joyce) 8. 11:03 AM - Re: facebook or twitter (Fred Klein) 9. 11:09 AM - Re: facebook or twitter (Peter Zutrauen) 10. 11:13 AM - Re: facebook or twitter (houlihan) 11. 11:15 AM - Re: facebook or twitter (g-fizy) 12. 11:23 AM - Re: facebook or twitter (g-fizy) 13. 11:30 AM - Re: facebook or twitter (Jeremy Fisher) 14. 11:47 AM - Re: facebook or twitter (Robert Borger) 15. 11:50 AM - Re: rubber anti-vibration mounts MT04 (jpg12305) 16. 11:55 AM - Re: facebook or twitter (Robert Borger) 17. 11:59 AM - Re: facebook or twitter (Ray fitton) 18. 12:00 PM - Re: facebook or twitter (Peter Zutrauen) 19. 12:16 PM - Re: facebook or twitter (Richard Holder) 20. 12:28 PM - =?utf-8?Q?Re:__facebook_or_twitter? () 21. 12:49 PM - Re: facebook or twitter (Christoph Both) 22. 12:56 PM - thottle gadget thingy (William Daniell) 23. 12:58 PM - Re: Re: facebook or twitter (Tony Renshaw) 24. 01:12 PM - Re: facebook or twitter (Pete) 25. 02:00 PM - Re: thottle gadget thingy NOW Rudder cable firewall penetration (Rob Housman) 26. 02:04 PM - Re: thottle gadget thingy (rparigor@suffolk.lib.ny.us) 27. 02:10 PM - Re: facebook or twitter (Pete Lawless) 28. 02:21 PM - Re: thottle gadget thingy NOW Rudder cable firewall penetration (William Daniell) 29. 02:22 PM - Re: thottle gadget thingy (William Daniell) 30. 03:55 PM - Re: thottle gadget thingy NOW Rudder cable firewall penetration (rparigor@suffolk.lib.ny.us) ________________________________ Message 1 _____________________________________ Time: 03:51:28 AM PST US Subject: Europa-List: Re: Noisy Comm Radio From: "Troy Maynor" I tried all the things suggested except the SWR check...no access to one yet. It made no difference running the Ipad and Stratus on self batteries. I check the integrity of all grounds and coax connections that were accessable. I did think I momentarily showed a short center to shield when I had my meter on the male pin in the back of the radio rack but could not repeat it. So now I have the panel at home in my garage. I built in such a way to have it out of the plane in about 30 minutes. I am planning to replace the RG58 with RG400 from the radio rack to the Bob Archer antenna on the port bulkhead aft. So my questions now are: 1. Should I put ferrite torroids on both my electric attitude ind. and turn coord. power wires? What other consumers would need torroids on their power feed...engine monitor? AOA system? Transponder? other? 2. Should I run a separate ground wire from the radio to the battery itself. Currently it is on one of the Bob Nuckoll's 20 or 30 point grounding strips connected to the negative battery cable inside the panel and would seem useless to run another wire to the same place anyway but maybe it would help. I do have one more spare pin on a connector to get thru the firewall of about a 20 gage wire size. 3. The Sigtronics intercom wires weren't shielded. Do they need to be wrapped up in some kind of shield foil or braid? I just want to "carpet bomb" anything that could contibute to noise, static, cross interference while I've got the panel out. I am also trying to find a new 90 degree coax fitting that fits the ICOM rack. I may be able to just reuse the one there now. Thank you so much for your responses. Troy Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422876#422876 ________________________________ Message 2 _____________________________________ Time: 09:04:22 AM PST US From: Richard Holder Subject: Europa-List: Swageing tool Hi Team My aircraft needs a new rudder cable. I have all the parts, but I don't have the swageing tool. Is there some kind person out there who could lend me one for a couple of weeks ? Very happy to pay postage or collect - I am between Stansted and Luton. TIA Richard Holder G-OWWW High Cross ________________________________ Message 3 _____________________________________ Time: 09:20:01 AM PST US Subject: Re: Europa-List: Swageing tool From: David Watts Richard I have a spare one that I was recently given, so you are more than welcome to have it for good. Let me know where to send it. Dave > On 6 May 2014, at 17:03, Richard Holder wrote: > > > Hi Team > > My aircraft needs a new rudder cable. I have all the parts, but I don't have the swageing tool. > > Is there some kind person out there who could lend me one for a couple of weeks ? > > Very happy to pay postage or collect - I am between Stansted and Luton. > > TIA > > Richard Holder > G-OWWW > High Cross > > > > ________________________________ Message 4 _____________________________________ Time: 10:21:19 AM PST US From: Richard Holder Subject: Re: Europa-List: Swageing tool On 06/05/2014 17:19, David Watts wrote: > Richard > > I have a spare one that I was recently given, so you are more than welcome to have it for good. Let me know where to send it. > > Dave What a star ! Thank you very much. Fantastic instant response. Richard Holder Bell House Bell Lane Widford Ware Herts SG12 8SH Look forward to meeting up at Laddingford soon. Richard ________________________________ Message 5 _____________________________________ Time: 10:51:05 AM PST US Subject: Europa-List: facebook or twitter From: "g-fizy" Can i just throw a thought out to you all ,should we move to facebook or twitter ,, I am not a big fan of this old style forum ,,perhaps we could bring this up at the AGM :-) regards jim davis -------- owner g-fizy Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422895#422895 ________________________________ Message 6 _____________________________________ Time: 10:55:27 AM PST US From: "David Joyce" Subject: Europa-List: Italy trip Dear All, Because of unanticipated domestic demands and in the light of the already fairly full Europa Trips program, I am thinking of dropping the Italian trip from this year's program. If any of you were really looking forward to it, do get in touch and I will consider rearranging it at a different time. Regards, David Joyce, G-XSDJ, EC Trips organiser. ________________________________ Message 7 _____________________________________ Time: 10:59:58 AM PST US From: "David Joyce" Subject: Re: Europa-List: facebook or twitter Jim, I for one would be reluctant. I have a number of other roles/relationships which take me onto email at least once a day, whereas I never go onto Facebook or Twitter unless someone posts a link to something like a video there. It is no doubt part of being a bit of an old F**t but I guess that a high proportion of Europa builders and flyers are post retirement age. Regards, David Joyce On Tue, 6 May 2014 10:50:29 -0700 "g-fizy" wrote: > > > Can i just throw a thought out to you all ,should we >move to facebook or twitter ,, I am not a big fan of this >old style forum ,,perhaps we could bring this up at the >AGM :-) > > regards jim davis > > -------- > owner g-fizy > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=422895#422895 > > > > > > > >Un/Subscription, >Forums! >Admin. > > > ________________________________ Message 8 _____________________________________ Time: 11:03:42 AM PST US Subject: Re: Europa-List: facebook or twitter From: Fred Klein Jim, Are there limitations to a list-serve which are overcome in the FB medium? >> I am not a big fan of this old style forum What exactly dont you like about the list-serve? Is this list-serve broken?If not Fred On May 6, 2014, at 10:50 AM, g-fizy wrote: > > Can i just throw a thought out to you all ,should we move to facebook or twitter ,, I am not a big fan of this old style forum ,,perhaps we could bring this up at the AGM :-) > > regards jim davis > > -------- > owner g-fizy > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=422895#422895 > > > > > > > > > ________________________________ Message 9 _____________________________________ Time: 11:09:39 AM PST US From: Peter Zutrauen Subject: Re: Europa-List: facebook or twitter Of the two, twitter has my vote, (I dislike facebook - much too cumbersome). That said, old style email works great for me, as it's easy to access anywhere, and it is archived for searching before broadcasting a question :) Cheers, Pete On Tue, May 6, 2014 at 1:50 PM, g-fizy wrote: > > Can i just throw a thought out to you all ,should we move to facebook or > twitter ,, I am not a big fan of this old style forum ,,perhaps we could > bring this up at the AGM :-) > > regards jim davis > > -------- > owner g-fizy > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=422895#422895 > > ________________________________ Message 10 ____________________________________ Time: 11:13:53 AM PST US Subject: Re: Europa-List: facebook or twitter From: houlihan Why ? What are the advantages of moving ? Tim On 6 May 2014 18:50, g-fizy wrote: > > Can i just throw a thought out to you all ,should we move to facebook or > twitter ,, I am not a big fan of this old style forum ,,perhaps we could > bring this up at the AGM :-) > > regards jim davis > > -------- > owner g-fizy > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=422895#422895 > > ________________________________ Message 11 ____________________________________ Time: 11:15:39 AM PST US Subject: Europa-List: Re: facebook or twitter From: "g-fizy" thanks david for making me feel young lol but im not that far behind you in the age game ,my mind thinks young but my body says your too old for that davidjoyce(at)doctors.org wrote: > Jim, I for one would be reluctant. I have a number of > other roles/relationships which take me onto email at > least once a day, whereas I never go onto Facebook or > Twitter unless someone posts a link to something like a > video there. It is no doubt part of being a bit of an old > F**t but I guess that a high proportion of Europa builders > and flyers are post retirement age. Regards, David Joyce > > > On Tue, 6 May 2014 10:50:29 -0700 > "g-fizy" wrote: > > > > > > > > > Can i just throw a thought out to you all ,should we > > move to facebook or twitter ,, I am not a big fan of this > > old style forum ,,perhaps we could bring this up at the > > AGM :-) > > > > regards jim davis > > > > -------- > > owner g-fizy > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=422895#422895 > > > > > > > > > > > > > > > > Un/Subscription, > > Forums! > > Admin. > > > > > > > > > > > -------- owner g-fizy Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422902#422902 ________________________________ Message 12 ____________________________________ Time: 11:23:40 AM PST US Subject: Europa-List: Re: facebook or twitter From: "g-fizy" hi fred ,I dislike the system ,often nothing is formatted correctly ,sometimes if their are a lot of messages its hard work to read ,,ok perhaps my fault for using iphone/ipad but i never need a pc also if you want to search i can only look at lists ,mite just be me but i follow lots of clubs and airfields on twitter and facebook and its just a easy way of saying hi or i was here and here is a pic Fred Klein wrote: > Jim, > > Are there limitations to a list-serve which are overcome in the FB medium? > > > > > I am not a big fan of this old style forum > > > > > > What exactly dont you like about the list-serve? > > Is this list-serve broken?If not > > Fred > > On May 6, 2014, at 10:50 AM, g-fizy wrote: > > > > > > > > Can i just throw a thought out to you all ,should we move to facebook or twitter ,, I am not a big fan of this old style forum ,,perhaps we could bring this up at the AGM :-) > > > > regards jim davis > > > > -------- > > owner g-fizy > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=422895#422895 > > > > > > > > > > > > > > > > > > > > > > > -------- owner g-fizy Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422903#422903 ________________________________ Message 13 ____________________________________ Time: 11:30:52 AM PST US Subject: Re: Europa-List: facebook or twitter From: Jeremy Fisher I for one would not use a Facebook or Twitter list system. I do not like either of them! I vote to keep the current system. Jerry Fisher On May 6, 2014, at 1:50 PM, g-fizy wrote: > > Can i just throw a thought out to you all ,should we move to facebook or twitter ,, I am not a big fan of this old style forum ,,perhaps we could bring this up at the AGM :-) > > regards jim davis > > -------- > owner g-fizy > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=422895#422895 > > > > > > > > > > ________________________________ Message 14 ____________________________________ Time: 11:47:18 AM PST US From: Robert Borger Subject: Re: Europa-List: facebook or twitter Jim & other Europaphiles,=0A=0APersonally, I'm quite happy with the list s erver version and am loath to clutter up my Facebook with this quantity of messaging. =C2-And I don't particularly care for Twitter in any case. =C2 -=0A=0AJust my 2 cents (pence, centieuro, etc., pick your currency) wort h.=0ABlue skies & tailwinds,=0ABob Borger=0AEuropa XS Tri, Rotax 914 w/ In tercooler & Airmaster C/S Prop=0ALittle Toot Sport Biplane, Lycoming AEIO- 320 EXP=0A3705 Lynchburg Dr.=0ACorinth, TX 76208-5331=0AH: 940-497-2123=0A C: 817-992-1117=0A=0AOn May 06, 2014, at 12:50 PM, g-fizy =0A=0ACan i just throw a thought out to y ou all ,should we move to facebook or twitter ,, I am not a big fan of thi s old style forum ,,perhaps we could bring this up at the AGM :-) =0A=0Are gards jim davis=0A=0A--------=0Aowner g-fizy=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp://forums.matronics.com/viewtopic.php?p=422895#42 ====0A=0A=0A=0A ________________________________ Message 15 ____________________________________ Time: 11:50:05 AM PST US Subject: Europa-List: Re: rubber anti-vibration mounts MT04 From: "jpg12305" Max, Simply contact Europa.... They were out of stock two months ago, but they should normally have the MT04 ref. Jean-Paul LFEF Read this topic online here: http://forums.matronics.com/viewtopic.php?p=422906#422906 ________________________________ Message 16 ____________________________________ Time: 11:55:13 AM PST US From: Robert Borger Subject: Re: Europa-List: facebook or twitter Jim,=0A=0AMust be setup issues with your iPhone/iPad. =C2-I'm primarily a Mac user. =C2-I use iPhone, iPad, Mac, MacBook & Windoze (as this is b eing written) and have no issues with any. =C2-Well, that was almost cor rect. =C2-Windoze/IE has caused problems but Windoze/Chrome seems to wor k just fine. =C2-I'd bet that Windoze/FireFox would be OK as well. =C2- If you want to contact me off-forum, I'd be glad to try and go through var ious setups to see if any help.=0ABlue skies & tailwinds,=0ABob Borger=0AE uropa XS Tri, Rotax 914 w/ Intercooler & Airmaster C/S Prop=0ALittle Toot Sport Biplane, Lycoming AEIO-320 EXP=0A3705 Lynchburg Dr.=0ACorinth, TX 76 208-5331=0AH: 940-497-2123=0AC: 817-992-1117=0A=0AOn May 06, 2014, at 01:2 3 PM, g-fizy wrote:=0A=0A-- =C2- =C2-> Europa-List message posted by: "g-fizy" =0A=0Ahi fre d ,I dislike the system ,often nothing is formatted correctly ,sometimes i f their are a lot of messages its hard work to read ,,ok perhaps my fault for using iphone/ipad but i never need a pc also if you want to search i c an only look at lists ,mite just be me =0A=0Abut i follow lots of clubs an d airfields on twitter and facebook and its just a easy way of saying hi o r i was here and here is a pic =0A=0A=0A ________________________________ Message 17 ____________________________________ Time: 11:59:20 AM PST US Subject: Re: Europa-List: facebook or twitter From: "Ray fitton" A europa list on facebook for images and stuff maybe handy Ray ------Original Message------ From: Jeremy Fisher Sender: owner-europa-list-server@matronics.com ReplyTo: europa-list@matronics.com Subject: Re: Europa-List: facebook or twitter Sent: 6 May 2014 19:30 I for one would not use a Facebook or Twitter list system. I do not like either of them! I vote to keep the current system. Jerry Fisher On May 6, 2014, at 1:50 PM, g-fizy wrote: > > Can i just throw a thought out to you all ,should we move to facebook or twitter ,, I am not a big fan of this old style forum ,,perhaps we could bring this up at the AGM :-) > > regards jim davis > > -------- > owner g-fizy > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=422895#422895 > > > > > > > > > > ________________________________ Message 18 ____________________________________ Time: 12:00:19 PM PST US From: Peter Zutrauen Subject: Re: Europa-List: facebook or twitter phew.... I'm quite partial to the current email paradigm, so am relieved to see its overwhelming support :-) Cheers, Pete On Tue, May 6, 2014 at 2:46 PM, Robert Borger wrote: > Jim & other Europaphiles, > > Personally, I'm quite happy with the list server version and am loath to > clutter up my Facebook with this quantity of messaging. And I don't > particularly care for Twitter in any case. > > Just my 2 cents (pence, centieuro, etc., pick your currency) worth. > > > Blue skies & tailwinds, > Bob Borger > Europa XS Tri, Rotax 914 w/ Intercooler & Airmaster C/S Prop > Little Toot Sport Biplane, Lycoming AEIO-320 EXP > 3705 Lynchburg Dr. > Corinth, TX 76208-5331 > H: 940-497-2123 > C: 817-992-1117 > > > On May 06, 2014, at 12:50 PM, g-fizy wrote: > > > Can i just throw a thought out to you all ,should we move to facebook or > twitter ,, I am not a big fan of this old style forum ,,perhaps we could > bring this up at the AGM :-) > > regards jim davis > > -------- > owner g-fizy > > > Read this topic online here: > > http://forums.matronics.www.matronics.com/Navigator?Europa-List" > data-mce-href="http://www.matronics.com/Navigator?Europa-List">http://www.matronics.com/Navigator?Europa-/forums.matronics.com" > data-mce-href="http://forums.matronics.com">http:======================= > http://www.matronics.com/c================ > > > > > ________________________________ Message 19 ____________________________________ Time: 12:16:48 PM PST US From: Richard Holder Subject: Re: Europa-List: facebook or twitter On 06/05/2014 19:30, Jeremy Fisher wrote: > I for one would not use a Facebook or Twitter list > system. I do not like either of them! I vote to keep > the current system. > Jerry Fisher Me too Richard Holder G-OWWW High Cross ________________________________ Message 20 ____________________________________ Time: 12:28:49 PM PST US From: Subject: =?utf-8?Q?Re:_Europa-List:_facebook_or_twitter? SSB0b28gd291bGQgbm90IHN1YnNjcmliZSB0byB1c2luZyBGYWNlYm9vayBvciBUd2l0dGVyLiAg V2hhdCBvbiBlYXJ0aCBpcyB3cm9uZyB3aXRoIHRoZSANCg0KZW1haWwgc3lzdGVtLiAgKGlmIGl0 IGFpbuKAmXQgYnJva2UsIHdoeSB0cnkgdG8gZml4IGl0KT8NCg0KUGV0ZSBKZWZmZXJzDQoNCg0K DQoNCg0KDQpTZW50IGZyb20gV2luZG93cyBNYWlsDQoNCg0KDQoNCg0KRnJvbTogUmljaGFyZCBI b2xkZXINClNlbnQ6IOKAjlR1ZXNkYXnigI4sIOKAjjbigI4g4oCOTWF54oCOIOKAjjIwMTQg4oCO MjDigI464oCOMTYNClRvOiBldXJvcGEtbGlzdEBtYXRyb25pY3MuY29tDQoNCg0KDQoNCg0KLS0+ IEV1cm9wYS1MaXN0IG1lc3NhZ2UgcG9zdGVkIGJ5OiBSaWNoYXJkIEhvbGRlciA8cmljaGFyZC5o b2xkZXJAb3V0bG9vay5jb20+DQoNCk9uIDA2LzA1LzIwMTQgMTk6MzAsIEplcmVteSBGaXNoZXIg d3JvdGU6DQoNCj4gSSBmb3Igb25lIHdvdWxkIG5vdCB1c2UgYSBGYWNlYm9vayBvciBUd2l0dGVy IGxpc3QNCj4gc3lzdGVtLiAgSSBkbyBub3QgbGlrZSBlaXRoZXIgb2YgdGhlbSEgICBJIHZvdGUg dG8ga2VlcA0KPiB0aGUgY3VycmVudCBzeXN0ZW0uDQoNCj4gSmVycnkgRmlzaGVyDQoNCk1lIHRv bw0KDQpSaWNoYXJkIEhvbGRlcg0KRy1PV1dXDQpIaWdoIENyb3NzDQoNCg0KXy09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0NCl8tPSAg ICAgICAgICAtIFRoZSBFdXJvcGEtTGlzdCBFbWFpbCBGb3J1bSAtDQpfLT0gVXNlIHRoZSBNYXRy b25pY3MgTGlzdCBGZWF0dXJlcyBOYXZpZ2F0b3IgdG8gYnJvd3NlDQpfLT0gdGhlIG1hbnkgTGlz dCB1dGlsaXRpZXMgc3VjaCBhcyBMaXN0IFVuL1N1YnNjcmlwdGlvbiwNCl8tPSBBcmNoaXZlIFNl YXJjaCAmIERvd25sb2FkLCA3LURheSBCcm93c2UsIENoYXQsIEZBUSwNCl8tPSBQaG90b3NoYXJl LCBhbmQgbXVjaCBtdWNoIG1vcmU6DQpfLT0NCl8tPSAgIC0tPiBodHRwOi8vd3d3Lm1hdHJvbmlj cy5jb20vTmF2aWdhdG9yP0V1cm9wYS1MaXN0DQpfLT0NCl8tPT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09DQpfLT0gICAgICAgICAgICAg ICAtIE1BVFJPTklDUyBXRUIgRk9SVU1TIC0NCl8tPSBTYW1lIGdyZWF0IGNvbnRlbnQgYWxzbyBh dmFpbGFibGUgdmlhIHRoZSBXZWIgRm9ydW1zIQ0KXy09DQpfLT0gICAtLT4gaHR0cDovL2ZvcnVt cy5tYXRyb25pY3MuY29tDQpfLT0NCl8tPT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09DQpfLT0gICAgICAgICAgICAgLSBMaXN0IENvbnRy aWJ1dGlvbiBXZWIgU2l0ZSAtDQpfLT0gIFRoYW5rIHlvdSBmb3IgeW91ciBnZW5lcm91cyBzdXBw b3J0IQ0KXy09ICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgLU1hdHQgRHJhbGxlLCBMaXN0 IEFkbWluLg0KXy09ICAgLS0+IGh0dHA6Ly93d3cubWF0cm9uaWNzLmNvbS9jb250cmlidXRpb24N Cl8tPT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09DQoNCg0KDQoNCg0KLS0tLS0NCk5vIHZpcnVzIGZvdW5kIGluIHRoaXMgbWVzc2FnZS4N CkNoZWNrZWQgYnkgQVZHIC0gd3d3LmF2Zy5jb20NClZlcnNpb246IDIwMTQuMC40NTc3IC8gVmly dXMgRGF0YWJhc2U6IDM5MzEvNzQ0OSAtIFJlbGVhc2UgRGF0ZTogMDUvMDYvMTQ ________________________________ Message 21 ____________________________________ Time: 12:49:52 PM PST US From: Christoph Both Subject: Re: Europa-List: facebook or twitter Keep email. Christoph Both #223 Wolfville, Nova Scotia From: Peter Zutrauen > ropa-list@matronics.com> >> Subject: Re: Europa-List: facebook or twitter phew.... I'm quite partial to the current email paradigm, so am relieved to see its overwhelming support :-) Cheers, Pete On Tue, May 6, 2014 at 2:46 PM, Robert Borger > wrote: Jim & other Europaphiles, Personally, I'm quite happy with the list server version and am loath to cl utter up my Facebook with this quantity of messaging. And I don't particul arly care for Twitter in any case. Just my 2 cents (pence, centieuro, etc., pick your currency) worth. Blue skies & tailwinds, Bob Borger Europa XS Tri, Rotax 914 w/ Intercooler & Airmaster C/S Prop Little Toot Sport Biplane, Lycoming AEIO-320 EXP 3705 Lynchburg Dr. Corinth, TX 76208-5331 H: 940-497-2123 C: 817-992-1117 On May 06, 2014, at 12:50 PM, g-fizy > wrote: im.davis1@me.com> > Can i just throw a thought out to you all ,should we move to facebook or tw itter ,, I am not a big fan of this old style forum ,,perhaps we could brin g this up at the AGM :-) regards jim davis -------- owner g-fizy Read this topic online here: http://forums.matronics.www.matronics.com/Navigator?Europa-List" data-mce-h ref="http://www.matronics.com/Navigator?Europa-List">http://www.matronics .com/Navigator?Europa-/forums.matronics.com" data-mce-href="http://forums .matronics.com">http:================== ======http://www.matronics.com/c========== ====== ________________________________ Message 22 ____________________________________ Time: 12:56:51 PM PST US Subject: Europa-List: thottle gadget thingy From: William Daniell I am totally stumped by the throttle thingy...what i am thinking is supposed to happen is that the throttle lever is supposed to move but at least the metal washers are supposed to stay still. try as I might i cant make the washers stop rotating and as a result it has a tendency to undo the nut holding everything together. What did anyone else do? Also in a twofer what about the holes in the firewall for the rudder cables? how are these sealed? thanks Will PS this would not be possible on twitter i believe because it only permits 120 characters I believe William Daniell LONGPORT +57 310 295 0744 ________________________________ Message 23 ____________________________________ Time: 12:58:18 PM PST US Subject: Re: Europa-List: Re: facebook or twitter From: Tony Renshaw Crazy idea. Matronics is a mature system, has all sorts of search options, and in my view would be change for changes sake. TR On 7 May 2014, at 4:15 am, g-fizy wrote: > > thanks david for making me feel young lol but im not that far behind you in the age game ,my mind thinks young but my body says your too old for that > > > > > davidjoyce(at)doctors.org wrote: >> Jim, I for one would be reluctant. I have a number of >> other roles/relationships which take me onto email at >> least once a day, whereas I never go onto Facebook or >> Twitter unless someone posts a link to something like a >> video there. It is no doubt part of being a bit of an old >> F**t but I guess that a high proportion of Europa builders >> and flyers are post retirement age. Regards, David Joyce >> >> >> On Tue, 6 May 2014 10:50:29 -0700 >> "g-fizy" wrote: >> >>> >>> >>> >>> Can i just throw a thought out to you all ,should we >>> move to facebook or twitter ,, I am not a big fan of this >>> old style forum ,,perhaps we could bring this up at the >>> AGM :-) >>> >>> regards jim davis >>> >>> -------- >>> owner g-fizy >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=422895#422895 >>> >>> >>> >>> >>> >>> >>> >>> Un/Subscription, >>> Forums! >>> Admin. >>> >>> >>> >>> >>> >> > > > -------- > owner g-fizy > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=422902#422902 > > > > > > > > > > ________________________________ Message 24 ____________________________________ Time: 01:12:06 PM PST US Subject: Re: Europa-List: facebook or twitter From: Pete We already have a great site with *loads* of pics..... And the more the merr ier! :-) http://europaowners.org/main.php > On May 6, 2014, at 2:58 PM, "Ray fitton" wrote : > > > > A europa list on facebook for images and stuff maybe handy > > Ray > > ------Original Message------ > From: Jeremy Fisher > Sender: owner-europa-list-server@matronics.com > To: europa-list@matronics.com > ReplyTo: europa-list@matronics.com > Subject: Re: Europa-List: facebook or twitter > Sent: 6 May 2014 19:30 > > > I for one would not use a Facebook or Twitter list system. I do not like e ither of them! I vote to keep the current system. > > Jerry Fisher >> On May 6, 2014, at 1:50 PM, g-fizy wrote: >> >> >> Can i just throw a thought out to you all ,should we move to facebook or t witter ,, I am not a big fan of this old style forum ,,perhaps we could brin g this up at the AGM :-) >> >> regards jim davis >> >> -------- >> owner g-fizy >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=422895#422895 > > > > > > > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > > > ________________________________ Message 25 ____________________________________ Time: 02:00:59 PM PST US From: "Rob Housman" Subject: RE: Europa-List: thottle gadget thingy NOW Rudder cable firewall penetration Good question, Will. I too have contemplated what to do about the gaping holes for the rudder cables. I have yet to come up with a solution, though perhaps a modification that uses a short push rod in a bushing through the firewall would mitigate the problem. Otherwise the firewall is the equivalent of crossing your fingers and making a wish that you won=99t have flames in the center tunnel. Has anyone addressed this? Best regards, Rob Housman Irvine, California Europa XS Rotax 914 S/N A070 Airframe complete Avionics in progress From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of William Daniell Sent: Tuesday, May 06, 2014 12:54 PM Subject: Europa-List: thottle gadget thingy I am totally stumped by the throttle thingy...what i am thinking is supposed to happen is that the throttle lever is supposed to move but at least the metal washers are supposed to stay still. try as I might i cant make the washers stop rotating and as a result it has a tendency to undo the nut holding everything together. What did anyone else do? Also in a twofer what about the holes in the firewall for the rudder cables? how are these sealed? thanks Will PS this would not be possible on twitter i believe because it only permits 120 characters I believe William Daniell LONGPORT +57 310 295 0744 ________________________________ Message 26 ____________________________________ Time: 02:04:38 PM PST US Subject: Re: Europa-List: thottle gadget thingy From: rparigor@suffolk.lib.ny.us Hi William I had the same problem, welded a nut to fender washer and JB Welded to housing. You should be able to find more details here:: http://www.europaowners.org/main.php?g2_itemId=29497 Ron Parigoris ________________________________ Message 27 ____________________________________ Time: 02:10:57 PM PST US From: Pete Lawless Subject: Re: Europa-List: facebook or twitter Evening All Add me to the wont use Twitter or Facebook list. Pete On 06/05/14 21:10, Pete wrote: > We already have a great site with *loads* of pics..... And the more > the merrier! :-) > > http://europaowners.org/main.php > > On May 6, 2014, at 2:58 PM, "Ray fitton" > wrote: > >> > >> >> A europa list on facebook for images and stuff maybe handy >> >> Ray >> >> ------Original Message------ >> From: Jeremy Fisher >> Sender: owner-europa-list-server@matronics.com >> >> To: europa-list@matronics.com >> ReplyTo: europa-list@matronics.com >> Subject: Re: Europa-List: facebook or twitter >> Sent: 6 May 2014 19:30 >> >> > >> >> I for one would not use a Facebook or Twitter list system. I do not >> like either of them! I vote to keep the current system. >> >> Jerry Fisher >> On May 6, 2014, at 1:50 PM, g-fizy wrote: >> >>> > >>> >>> Can i just throw a thought out to you all ,should we move to >>> facebook or twitter ,, I am not a big fan of this old style forum >>> ,,perhaps we could bring this up at the AGM :-) >>> >>> regards jim davis >>> >>> -------- >>> owner g-fizy >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=422895#422895 >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >> >> >> >> >> >> >> >> >> >> http://www.matronics.com/Navigator?Europa-List >> >> _ &n--> >> http://www.matronic================================================ >> >> >> >> >> > > * > > > * ________________________________ Message 28 ____________________________________ Time: 02:21:11 PM PST US Subject: Re: Europa-List: thottle gadget thingy NOW Rudder cable firewall penetration From: William Daniell =8Bis crossed fingers an approved mod i wonder? :-) It really makes one wonder about all the sealing etc mentioned in the manua l Will =8B William Daniell LONGPORT +57 310 295 0744 On Tue, May 6, 2014 at 4:00 PM, Rob Housman wrote: > Good question, Will. > > > I too have contemplated what to do about the gaping holes for the rudder > cables. I have yet to come up with a solution, though perhaps a > modification that uses a short push rod in a bushing through the firewall > would mitigate the problem. Otherwise the firewall is the equivalent of > crossing your fingers and making a wish that you won=99t have flame s in the > center tunnel. > > > Has anyone addressed this? > > > Best regards, > > > Rob Housman > > Irvine, California > > Europa XS > > Rotax 914 > > S/N A070 > > Airframe complete > > Avionics in progress > > > *From:* owner-europa-list-server@matronics.com [mailto: > owner-europa-list-server@matronics.com] *On Behalf Of *William Daniell > *Sent:* Tuesday, May 06, 2014 12:54 PM > *To:* europa-list@matronics.com > *Subject:* Europa-List: thottle gadget thingy > > > I am totally stumped by the throttle thingy...what i am thinking is > supposed to happen is that the throttle lever is supposed to move but at > least the metal washers are supposed to stay still. > > > try as I might i cant make the washers stop rotating and as a result it > has a tendency to undo the nut holding everything together. > > > What did anyone else do? > > > Also in a twofer what about the holes in the firewall for the rudder > cables? how are these sealed? > > > thanks Will > > > PS this would not be possible on twitter i believe because it only permit s > 120 characters I believe > > > William Daniell > > LONGPORT > > +57 310 295 0744 > > > *http://www.matronics.com/Navigator?Europa-List * > > *http://forums.matronics.com * > > *http://www.matronics.com/contribution * > > > * > =========== tronics.com/Navigator?Europa-List> =========== =========== om/contribution> =========== > > * > > ________________________________ Message 29 ____________________________________ Time: 02:22:12 PM PST US Subject: Re: Europa-List: thottle gadget thingy From: William Daniell thanks ron the *&5$ing thing was driving me mad Will William Daniell LONGPORT +57 310 295 0744 On Tue, May 6, 2014 at 4:03 PM, wrote: > Hi William > > I had the same problem, welded a nut to fender washer and JB Welded to > housing. > > You should be able to find more details here:: > > http://www.europaowners.org/main.php?g2_itemId=29497 > > Ron Parigoris > > * > > > * > > ________________________________ Message 30 ____________________________________ Time: 03:55:32 PM PST US Subject: Re: Europa-List: thottle gadget thingy NOW Rudder cable firewall penetration From: rparigor@suffolk.lib.ny.us Hi Rob "I too have contemplated what to do about the gaping holes for the rudder cables" Here's how i dealt with the holes: http://www.europaowners.org/main.php?g2_itemId=27732 Ron Parigoris ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.