---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 12/21/14: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:26 AM - Fuel cap. (David Park) 2. 09:30 AM - Epoxy Dispeser. (David Park) 3. 01:59 PM - Re: Epoxy Dispeser. (Ian Cook) 4. 02:08 PM - Re: Epoxy Dispeser. (Tony Renshaw) 5. 03:04 PM - Re: Epoxy Dispeser. (Fred Klein) 6. 03:10 PM - Re: Epoxy Dispeser. (spcialeffects) 7. 04:45 PM - Re: Epoxy Dispeser. (david park) 8. 04:52 PM - Re: Epoxy Dispeser. (david park) 9. 05:45 PM - Using a digital scale for measuring Epoxy (rparigoris) ________________________________ Message 1 _____________________________________ Time: 09:26:46 AM PST US Subject: Europa-List: Fuel cap. From: David Park I have one of Bud Yerly's 70mm fuel caps excess to requirements. Will accept something near what I paid for it. Or would swap for the smaller one? Regards Dave Park G-LDVO Sent from my iPad ________________________________ Message 2 _____________________________________ Time: 09:30:58 AM PST US Subject: Europa-List: Epoxy Dispeser. From: David Park Too old to start building another aircraft, couldn't get permission anyway!!!. So my Adjustable Epoxy Dispenser is available Model AR-100 originally from J & B Products, USA. Spare tanks. Would need a good clean up. Any offers? Dave G-LDVO Sent from my iPad ________________________________ Message 3 _____________________________________ Time: 01:59:22 PM PST US From: Ian Cook Subject: RE: Europa-List: Epoxy Dispeser. Dave, I am just about to start on a build, where are you based do you have an idea of what you are looking for ? Ian Cook Andover Hants 07912944536 -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of David Park Sent: 21 December 2014 17:30 Subject: Europa-List: Epoxy Dispeser. Too old to start building another aircraft, couldn't get permission anyway!!!. So my Adjustable Epoxy Dispenser is available Model AR-100 originally from J & B Products, USA. Spare tanks. Would need a good clean up. Any offers? Dave G-LDVO Sent from my iPad ________________________________ Message 4 _____________________________________ Time: 02:08:58 PM PST US Subject: Re: Europa-List: Epoxy Dispeser. From: Tony Renshaw Its worth mentioning that these pumps do not solve all problems, and create a few of their own. They gum up which effects the volume of the hardener, so you have to cap off the outlets. They scale where air is allowed to effect the hardener. You will have ongoing anxiety that things are not right, and when you do test it, youll often find it will need adjustment. My view, they are rubbish. Dont do it! Sorry Dave, Ill compensate by paying the trash fee. Nothing beats a set of digital scales. Tony Renshaw > On 22 Dec 2014, at 8:58 am, Ian Cook wrote: > > > Dave, > I am just about to start on a build, where are you based do you > have an idea of what you are looking for ? > > Ian Cook > Andover Hants > 07912944536 > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of David Park > Sent: 21 December 2014 17:30 > To: europa-list@matronics.com > Subject: Europa-List: Epoxy Dispeser. > > > Too old to start building another aircraft, couldn't get permission > anyway!!!. > So my Adjustable Epoxy Dispenser is available Model AR-100 originally from J > & B Products, USA. Spare tanks. > Would need a good clean up. Any offers? > Dave G-LDVO > > Sent from my iPad > > > > > > > > ________________________________ Message 5 _____________________________________ Time: 03:04:06 PM PST US From: Fred Klein Subject: Re: Europa-List: Epoxy Dispeser. > On Dec 21, 2014, at 2:08 PM, Tony Renshaw wrote: > > Its worth mentioning that these pumps do not solve all problems, and create a few of their own. They gum up which effects the volume of the hardener, so you have to cap off the outlets. They scale where air is allowed to effect the hardener. You will have ongoing anxiety that things are not right, and when you do test it, you=99ll often find it will need adjustment. My view, they are rubbish. Don=99t do it! Sorry Dave, I=99ll compensate by paying the trash fee. Nothing beats a set of digital scales. I too have a discarded and gummed up resin dispenser pumpand though i have no weigh (just couldn=99t resist) of precisely comparing my balance beam w/ a digital scale, one of the advantages of the balance beam is that its use completely eliminates the necessity of precise quantity measurements of both resin and hardenera very useful advantage when =9Cjust enough=9D epoxy is requiredand as for sensitivity, it=99s always gratifying to see the beam balancing out after adding only the tiniest amount of hardener. It was quite easy to mark the beam so it could be used for different epoxy ratios. I would not trade my balance for even the priciest of digital scales. Fred ________________________________ Message 6 _____________________________________ Time: 03:10:15 PM PST US Subject: Europa-List: Re: Epoxy Dispeser. From: "spcialeffects" I don't agree Tony. I have been using one for two years now. I keep it in a cupboard with a little white garden heater to keep the temperature about 25 degrees C and every time I check its ratio it's been spot on to the day I set it. As I'm building a classic with wet wings it's been invaluable. In my opion a great time saver. Ian, my advice.......for the few pounds it will cost to buy, get it and use it and make your own mind up. Frank Read this topic online here: http://forums.matronics.com/viewtopic.php?p=435976#435976 ________________________________ Message 7 _____________________________________ Time: 04:45:52 PM PST US From: david park Subject: Re: Europa-List: Epoxy Dispeser. Europa based at Sleap and I live South manchester near airport. Will send pics tomo Dave Sent from my iPad > On 21 Dec 2014, at 21:58, Ian Cook wrote: > > > Dave, > I am just about to start on a build, where are you based do you > have an idea of what you are looking for ? > > Ian Cook > Andover Hants > 07912944536 > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of David Park > Sent: 21 December 2014 17:30 > To: europa-list@matronics.com > Subject: Europa-List: Epoxy Dispeser. > > > Too old to start building another aircraft, couldn't get permission > anyway!!!. > So my Adjustable Epoxy Dispenser is available Model AR-100 originally from J > & B Products, USA. Spare tanks. > Would need a good clean up. Any offers? > Dave G-LDVO > > Sent from my iPad > > > > > > > > ________________________________ Message 8 _____________________________________ Time: 04:52:20 PM PST US From: david park Subject: Re: Europa-List: Epoxy Dispeser. Just seen the other posts, so will bin it. It is true you have to keep it clear of gumming up. The more you use it the better and check the dispensing with samples. Dave Sent from my iPad > On 21 Dec 2014, at 21:58, Ian Cook wrote: > > > Dave, > I am just about to start on a build, where are you based do you > have an idea of what you are looking for ? > > Ian Cook > Andover Hants > 07912944536 > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of David Park > Sent: 21 December 2014 17:30 > To: europa-list@matronics.com > Subject: Europa-List: Epoxy Dispeser. > > > Too old to start building another aircraft, couldn't get permission > anyway!!!. > So my Adjustable Epoxy Dispenser is available Model AR-100 originally from J > & B Products, USA. Spare tanks. > Would need a good clean up. Any offers? > Dave G-LDVO > > Sent from my iPad > > > > > > > > ________________________________ Message 9 _____________________________________ Time: 05:45:31 PM PST US Subject: Europa-List: Using a digital scale for measuring Epoxy From: "rparigoris" Hi Group I just want to make a quick comment on using a Digital scale to measure Epoxy: Don't absolute put trust in them without verification! I have a few scales, and sometimes they get out of calibration when pouring Epoxy or Hardener slowly. I'm not talking about an absolute calibration with a standard (which I do once in a while), I'm talking about the "zero" calibration changing during weighing. What I do prior to mix, I make sure I have "two" empty mixing cups (with mixing sticks) that weigh exactly the same. I then zero out a cup with mixing stick. Then pour Epoxy, switch cups to make sure still zeroed. If not than rezero and make Epoxy adjustment. Then add Hardener, switch cups to make sure still zeroed. If not then rezero and make Epoxy adjustment. Mixing stick is absolutely needed for Redux mix, I find it helpful if you overdid Aeropoxy Epoxy. My two cents. Ron Parigoris Read this topic online here: http://forums.matronics.com/viewtopic.php?p=435985#435985 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.