---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 01/20/15: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:04 PM - Jamar finger brakes (bill mcclellan) 2. 12:51 PM - Re: Jamar finger brakes (Nigel Graham) 3. 12:52 PM - Re: Jamar finger brakes (Christoph Both) 4. 02:16 PM - Re: Jamar finger brakes (Tony Renshaw) 5. 11:25 PM - Trim (alan.twigg775@gmail.com) ________________________________ Message 1 _____________________________________ Time: 12:04:03 PM PST US Subject: Europa-List: Jamar finger brakes From: "bill mcclellan" I have installed the Jamar dual brake cylinders and I have Grove brakes. It appears that Jamar requires Dot 3 or 4 brake fluid and Grove requires MIL-5606 hydraulic fluid as does Matco. I don't believe these two fluids are not compatible. Does anyone have Jamar brakes cylinders with Grove or Matco brakes? If so what brake fluid do you use and find compatible with this brake combination? Thanks, Bill McClellan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=437336#437336 ________________________________ Message 2 _____________________________________ Time: 12:51:45 PM PST US From: Nigel Graham Subject: Re: Europa-List: Jamar finger brakes Bill, The definitive document on all things "Europa Brake Fluid" can be found on the club website at: http://www.theeuropaclub.org/wp-content/uploads/2012/03/Brake-Fluid-review.pdf Ian Rickard's excellent research even gives you the supplier of replacement master and slave cylinder "O" rings for whichever fluid system you decide on. Nigel On 20/01/2015 20:03, bill mcclellan wrote: > > I have installed the Jamar dual brake cylinders and I have Grove brakes. It appears that Jamar requires Dot 3 or 4 brake fluid and Grove requires MIL-5606 hydraulic fluid as does Matco. I don't believe these two fluids are not compatible. Does anyone have Jamar brakes cylinders with Grove or Matco brakes? If so what brake fluid do you use and find compatible with this brake combination? > > Thanks, > Bill McClellan > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=437336#437336 > > ________________________________ Message 3 _____________________________________ Time: 12:52:17 PM PST US From: Christoph Both Subject: Re: Europa-List: Jamar finger brakes I have the original Jamar and Matco Brakes. I only use DOT 5.0 100% silicone fluid. Works very well. Just dont get the fluid on the unpainted plane - hard to remove! Christoph Both #223 Classic 912 ULS Woodcomp SR3000 Nova Scotia Canada. On 2015-01-20, 4:03 PM, "bill mcclellan" wrote: > > >I have installed the Jamar dual brake cylinders and I have Grove brakes. >It appears that Jamar requires Dot 3 or 4 brake fluid and Grove requires >MIL-5606 hydraulic fluid as does Matco. I don't believe these two fluids >are not compatible. Does anyone have Jamar brakes cylinders with Grove >or Matco brakes? If so what brake fluid do you use and find compatible >with this brake combination? > >Thanks, >Bill McClellan > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=437336#437336 > > ________________________________ Message 4 _____________________________________ Time: 02:16:39 PM PST US Subject: Re: Europa-List: Jamar finger brakes From: Tony Renshaw Hi Bill, I hope alls we'll in your world and your first flight is getting closer. How are you progressing? I am not far from putting the top on, but am doing a major pool restoration at the moment which has become another distraction. I gather though of you haven't been building you may still have been flying. I still envy that back country flying in the canyons. Regards Tony Renshaw On Wednesday, January 21, 2015, bill mcclellan wrote: > > > > I have installed the Jamar dual brake cylinders and I have Grove brakes. > It appears that Jamar requires Dot 3 or 4 brake fluid and Grove requires > MIL-5606 hydraulic fluid as does Matco. I don't believe these two fluids > are not compatible. Does anyone have Jamar brakes cylinders with Grove or > Matco brakes? If so what brake fluid do you use and find compatible with > this brake combination? > > Thanks, > Bill McClellan > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=437336#437336 > > -- Sent from Gmail Mobile ________________________________ Message 5 _____________________________________ Time: 11:25:53 PM PST US From: alan.twigg775@gmail.com Subject: Europa-List: Trim Does anyone have a set of trim templates they can lend me? Thanks Alan Twigg Kit 463 Motorglider Rebuilding fuselage after paint. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.