---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 02/05/15: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:52 AM - Stage 1 kit (NG) for sale (Wouter Kroon - Doscha BV) 2. 01:18 AM - Re: Stage 1 kit (NG) for sale (Max Cointe (Free)) 3. 06:20 AM - Integrating an ipad mini in the panel (ploucandco) 4. 08:05 AM - Re: Integrating an ipad mini in the panel (Max Cointe (Free)) 5. 10:34 AM - Re: Integrating an ipad mini in the panel (Richard Wheelwright) 6. 01:01 PM - Re: Integrating an ipad mini in the panel (PETER MORGANS) 7. 02:51 PM - Re: Re: Integrating an ipad mini in the panel (david park) 8. 03:13 PM - Re: Re: Integrating an ipad mini in the panel (Robert Borger) 9. 03:25 PM - Re: Integrating an ipad mini in the panel (ploucandco) ________________________________ Message 1 _____________________________________ Time: 12:52:28 AM PST US From: Wouter Kroon - Doscha BV Subject: Europa-List: Stage 1 kit (NG) for sale Stage 1 kit (NG) for sale. Unfortunately I have to sell my Europa Stage 1 (NG) kit. =D8 Rudder done =D8 Trim taps done =D8 Tailplanes done =D8 Torque Tube fitting perfect tailplanes. =D8 Flaps and ailerons NG =D8 All necessary hardware =D8 Templates, moulds =D8 Fuselage undercarriage on wheels. Located Naarden, The Netherlands. Do me an offer on w.kroon@doscha.nl Factory price GBP 7000 Vriendelijke groeten, Doscha BV Wouter Kroon [Beschrijving: http://www.kairatin.nl/images/doschaTemplate/logo.png] Tel. +31 (0)35 - 53 30 190 Fax. +31 (0)35 - 53 30 191 www.Doscha.nl W.Kroon@Doscha.nl ________________________________ Disclaimer. Deze e-mail bevat vertrouwelijke informatie en is uitsluitend bedoeld voor de geadresseerde(n). Indien dit e-mail bericht niet voor u is bedoeld, dan wel abusievelijk aan u is verstuurd, wordt u verzocht de afzender hiervan o p de hoogte te stellen door het bericht te retourneren. Gebruik van deze in formatie door anderen dan de geadresseerde, openbaarmaking, vermenigvuldigi ng, verspreiding en/of verstrekking van deze informatie aan derden is niet toegestaan zonder goedkeuring van de afzender en valt buiten de verantwoord elijkheid en aansprakelijkheid van Doscha BV. Aan de ontvangst en/of verzen ding van dit e-mail bericht kunnen geen rechten worden ontleend. Meningen v erkondigd in deze e-mail vertegenwoordigen niet noodzakelijk de mening van onze organisatie, of aan haar gelieerde ondernemingen. ________________________________ ________________________________ Message 2 _____________________________________ Time: 01:18:08 AM PST US From: "Max Cointe (Free)" Subject: RE: Europa-List: Stage 1 kit (NG) for sale Hi Wouter, Any picture available ? Max Cointe F-PMLH Europa XS_TriGear Kit #560-2003 912ULS/AirmasterAP332 540 hours F-PLDJ Dyn=92A=E9ro MCR 4S Kit #27-2002 912ULSFR/MTProp MTV7A 1660 heures De : owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] De la part de Wouter Kroon - Doscha BV Envoy=E9 : jeudi 5 f=E9vrier 2015 09:49 =C0 : europa-list@matronics.com Objet : Europa-List: Stage 1 kit (NG) for sale Stage 1 kit (NG) for sale. Unfortunately I have to sell my Europa Stage 1 (NG) kit. =D8 Rudder done =D8 Trim taps done =D8 Tailplanes done =D8 Torque Tube fitting perfect tailplanes. =D8 Flaps and ailerons NG =D8 All necessary hardware =D8 Templates, moulds =D8 Fuselage undercarriage on wheels. Located Naarden, The Netherlands. Do me an offer on w.kroon@doscha.nl Factory price GBP 7000 Vriendelijke groeten, Doscha BV Wouter Kroon Beschrijving: http://www.kairatin.nl/images/doschaTemplate/logo.png Tel. +31 (0)35 - 53 30 190 Fax. +31 (0)35 - 53 30 191 www.Doscha.nl W.Kroon@Doscha.nl _____ Disclaimer. Deze e-mail bevat vertrouwelijke informatie en is uitsluitend bedoeld voor de geadresseerde(n). Indien dit e-mail bericht niet voor u is bedoeld, dan wel abusievelijk aan u is verstuurd, wordt u verzocht de afzender hiervan op de hoogte te stellen door het bericht te retourneren. Gebruik van deze informatie door anderen dan de geadresseerde, openbaarmaking, vermenigvuldiging, verspreiding en/of verstrekking van deze informatie aan derden is niet toegestaan zonder goedkeuring van de afzender en valt buiten de verantwoordelijkheid en aansprakelijkheid van Doscha BV. Aan de ontvangst en/of verzending van dit e-mail bericht kunnen geen rechten worden ontleend. Meningen verkondigd in deze e-mail vertegenwoordigen niet noodzakelijk de mening van onze organisatie, of aan haar gelieerde ondernemingen. _____ ________________________________ Message 3 _____________________________________ Time: 06:20:34 AM PST US Subject: Europa-List: Integrating an ipad mini in the panel From: "ploucandco" Hello all, Just wanted to share some pictures of the outstanding work that Dirk Oyen, the builder of OO-145, did by integrating an ipad mini in his panel. A new left panel fiberglass made in which you just slide in the ipad mini. On top of that, a dedicated converter takes the ipad lightning connector digital audio information and transforms it to analog in order to enter the aux input of the Funke ATR833 radio. So Skydemon as moving map and the ipad music player as entertainment source. The cable on the pictures is the original one without audio interface. Have fun, Jacques Read this topic online here: http://forums.matronics.com/viewtopic.php?p=438074#438074 Attachments: http://forums.matronics.com//files/img_1483_159.jpg http://forums.matronics.com//files/img_1484_358.jpg http://forums.matronics.com//files/img_1487_203.jpg http://forums.matronics.com//files/img_1489_162.jpg http://forums.matronics.com//files/img_1491_181.jpg http://forums.matronics.com//files/20150202_205135_101.jpg http://forums.matronics.com//files/20150202_205238_193.jpg ________________________________ Message 4 _____________________________________ Time: 08:05:50 AM PST US From: "Max Cointe (Free)" Subject: RE: Europa-List: Integrating an ipad mini in the panel Hi Jacques, Great job! How can we reproduce it? Max Cointe mcointe@free.fr F-PMLH Europa XS_TriGear Kit #560-2003 912ULS/AirmasterAP332 540 hours F-PLDJ DynAro MCR 4S Kit #27-2002 912ULSFR/MTProp MTV7A 1660 heures -----Message d'origine----- De: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] De la part de ploucandco Envoy: jeudi 5 fvrier 2015 15:20 : europa-list@matronics.com Objet: Europa-List: Integrating an ipad mini in the panel --> Hello all, Just wanted to share some pictures of the outstanding work that Dirk Oyen, the builder of OO-145, did by integrating an ipad mini in his panel. A new left panel fiberglass made in which you just slide in the ipad mini. On top of that, a dedicated converter takes the ipad lightning connector digital audio information and transforms it to analog in order to enter the aux input of the Funke ATR833 radio. So Skydemon as moving map and the ipad music player as entertainment source. The cable on the pictures is the original one without audio interface. Have fun, Jacques Read this topic online here: http://forums.matronics.com/viewtopic.php?p=438074#438074 Attachments: http://forums.matronics.com//files/img_1483_159.jpg http://forums.matronics.com//files/img_1484_358.jpg http://forums.matronics.com//files/img_1487_203.jpg http://forums.matronics.com//files/img_1489_162.jpg http://forums.matronics.com//files/img_1491_181.jpg http://forums.matronics.com//files/20150202_205135_101.jpg http://forums.matronics.com//files/20150202_205238_193.jpg ________________________________ Message 5 _____________________________________ Time: 10:34:12 AM PST US Subject: Europa-List: Re: Integrating an ipad mini in the panel From: "Richard Wheelwright" Very Nice Job. How is the GPS Reception into the Ipad? I found mounting the Ipad similar to yours, that the GPS reception was poor. To get over the poor reception I had to use a bluetooth GPS receiver. Another problem I had was powering the Ipad. The plug into the 12V power outlet (cigarette lighter socket) Different units produced static interference over the head set. I could not find one that did not cause a problem. I would be interested in knowing how you have got over the problem and what interface you used for powering your Ipad. Your work looks very neat. Any information you may want to share would be very gratefully receve. -------- Richard Wheelwright G-IRPW First Flight 24th July 2013 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=438087#438087 ________________________________ Message 6 _____________________________________ Time: 01:01:33 PM PST US From: PETER MORGANS Subject: Re: Europa-List: Integrating an ipad mini in the panel Hi Jaques,=0ANice panel; interesting to see that-the trim switch has been installed so that the operation matches the position indicator - ie.,'up' against 'up' - contrary to the manual. I've turned my switch around as well and-it's certainly more instinctive, and hence safer-for me, than the original configuration. =0AKind Regards=0APeter=0A =0A=0A__________________ ______________=0A From: ploucandco =0ATo: europa-l ist@matronics.com =0ASent: Thursday, 5 February 2015, 14:19=0ASubject: Euro pa-List: Integrating an ipad mini in the panel=0A =0A=0A--> Europa-List me ssage posted by: "ploucandco" =0A=0AHello all,=0A =0AJust wanted to share some pictures of the outstanding work that Dirk Oye n, the builder of OO-145, did by integrating an ipad mini in his panel. A n ew left panel fiberglass made in which you just slide in the ipad mini.=0A =0AOn top of that, a dedicated converter takes the ipad lightning connector digital audio information and transforms it to analog in order to enter th e aux input of the Funke ATR833 radio.=0A=0ASo Skydemon as moving map and t he ipad music player as entertainment source. The cable on the pictures is the original one without audio interface.=0A=0AHave fun, Jacques=0A=0A=0A =0A=0ARead this topic online here:=0A=0Ahttp://forums.matronics.com/viewtop ic.php?p=438074#438074=0A=0A=0A=0A=0AAttachments: =0A=0Ahttp://forums.mat ronics.com//files/img_1483_159.jpg=0Ahttp://forums.matronics.com//files/img _1484_358.jpg=0Ahttp://forums.matronics.com//files/img_1487_203.jpg=0Ahttp: //forums.matronics.com//files/img_1489_162.jpg=0Ahttp://forums.matronics.co m//files/img_1491_181.jpg=0Ahttp://forums.matronics.com//files/20150202_205 135_101.jpg=0Ahttp://forums.matronics.com//files/20150202_205238_193.jpg=0A ================== ________________________________ Message 7 _____________________________________ Time: 02:51:11 PM PST US From: david park Subject: Re: Europa-List: Re: Integrating an ipad mini in the panel Richard, I use my Mini Ipad fitted to right hand inst panel powered by cigarette lighter socket direct from battery thru fuse on engine side of firewall. The lighter socket also serves as a convenient way to charge the battery. No probs with interference. Regards Dave G-LDVO Sent from my iPhone > On 5 Feb 2015, at 18:33, Richard Wheelwright wrote: > > > Very Nice Job. > How is the GPS Reception into the Ipad? > I found mounting the Ipad similar to yours, that the GPS reception was poor. To get over the poor reception I had to use a bluetooth GPS receiver. > > Another problem I had was powering the Ipad. The plug into the 12V power outlet (cigarette lighter socket) Different units produced static interference over the head set. I could not find one that did not cause a problem. I would be interested in knowing how you have got over the problem and what interface you used for powering your Ipad. > > Your work looks very neat. Any information you may want to share would be very gratefully receve. > > -------- > Richard Wheelwright > G-IRPW > First Flight 24th July 2013 > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=438087#438087 > > > > > > > > > > ________________________________ Message 8 _____________________________________ Time: 03:13:24 PM PST US Subject: Re: Europa-List: Re: Integrating an ipad mini in the panel From: Robert Borger Gents, FWIW, I use an iPad2 on a RAM mount attached to the right side of the instrument panel. Power comes from a USB terminal on the back of my GRT Sport to which I have added an extension which comes around to the left side of the display. Ya, it=99s kinda ungainly from the cockpit with a USB line running from one side of the panel to the other, but for now it works. No noise, no interference, no problems at all. Eventually, I may see if I can obtain a longer USB extension and bring it out the right side of the right panel close to the iPad. But that=99s for future work on the panels. Right now I need to start an annual condition inspection so I can see if, in 2015, I can fly more than double the 25 hrs I flew in 2014. Blue skies & tailwinds Y'all, Bob Borger Europa XS Tri, Rotax 914, Airmaster C/S Prop (75 hrs). Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP 3705 Lynchburg Dr. Corinth, TX 76208-5331 Cel: 817-992-1117 rlborger@mac.com On Feb 5, 2015, at 4:49 PM, david park wrote: Richard, I use my Mini Ipad fitted to right hand inst panel powered by cigarette lighter socket direct from battery thru fuse on engine side of firewall. The lighter socket also serves as a convenient way to charge the battery. No probs with interference. Regards Dave G-LDVO Sent from my iPhone > On 5 Feb 2015, at 18:33, Richard Wheelwright wrote: > > > Very Nice Job. > How is the GPS Reception into the Ipad? > I found mounting the Ipad similar to yours, that the GPS reception was poor. To get over the poor reception I had to use a bluetooth GPS receiver. > > Another problem I had was powering the Ipad. The plug into the 12V power outlet (cigarette lighter socket) Different units produced static interference over the head set. I could not find one that did not cause a problem. I would be interested in knowing how you have got over the problem and what interface you used for powering your Ipad. > > Your work looks very neat. Any information you may want to share would be very gratefully receve. > > -------- > Richard Wheelwright > G-IRPW > First Flight 24th July 2013 ________________________________ Message 9 _____________________________________ Time: 03:25:04 PM PST US Subject: Europa-List: Re: Integrating an ipad mini in the panel From: "ploucandco" Hello Richard, the Funke ATR833 is very sensitive to interferences (EMC) and so we had to go for an expensive TomTom 12V to high power USB adapter. Is your panel metal or fiberglass that you had GPS issues? This one is fiberglass for not blocking GPS signal. If you want more infos, you can send me a private message to receive Dirk's e-mail. Jacques. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=438102#438102 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.