---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Mon 03/02/15: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:00 PM - Oil Hose (Martin Tuck) 2. 11:08 PM - Re: Oil Hose (Alan Burrill) ________________________________ Message 1 _____________________________________ Time: 09:00:54 PM PST US From: Martin Tuck Subject: Europa-List: Oil Hose Hi All, I'm looking to replace my oil hoses. The one from the pump to the radiator has a 90 deg bend in it. I had noted that it was suggested I contact Lockwood as they have a metal 90 deg adapter to which regular hose could be fitted. I contacted them and they said just to use 'an AN fitting size -8'. Looking at the manual though the thread seems to be 14.4mm so I'm not sure what they meant now. I wonder if they meant to make a 90 deg elbow using AN fittings. I couldn't figure the parts I would need though. Any help as to what others have done would be appreciated. Also, are there any US sources for the rubber engine mounts or are they uniquely Europa, in which case I would contact the factory in the UK. Regards, Martin Tuck N152MT Wichita, KS ________________________________ Message 2 _____________________________________ Time: 11:08:49 PM PST US Subject: Re: Europa-List: Oil Hose From: Alan Burrill Replaced mine last year and used normal oil hose with no bends and no 90 deg bend on the pump. route of hose work ok without any kinks or tight bends. Alan G-OBJT > On 3 Mar 2015, at 04:59, Martin Tuck wrote: > > > Hi All, > > I'm looking to replace my oil hoses. The one from the pump to the radiator has a 90 deg bend in it. I had noted that it was suggested I contact Lockwood as they have a metal 90 deg adapter to which regular hose could be fitted. I contacted them and they said just to use 'an AN fitting size -8'. Looking at the manual though the thread seems to be 14.4mm so I'm not sure what they meant now. I wonder if they meant to make a 90 deg elbow using AN fittings. I couldn't figure the parts I would need though. > > Any help as to what others have done would be appreciated. > > Also, are there any US sources for the rubber engine mounts or are they uniquely Europa, in which case I would contact the factory in the UK. > > Regards, > Martin Tuck > N152MT > Wichita, KS > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.