---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 03/03/15: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:49 AM - Re: Oil Hose (Max Cointe (Free)) 2. 02:23 AM - EUROPA TRAILER (hanaperrod) 3. 04:15 AM - Re: EUROPA TRAILER (alan.twigg775@gmail.com) 4. 05:10 AM - Re: Oil Hose (h&jeuropa) 5. 06:10 AM - Re: EUROPA TRAILER (hanaperrod) 6. 12:21 PM - Re: Oil Hose (AUVRAY Michel) 7. 02:08 PM - Re: Oil Hose (Paul McAllister) 8. 06:35 PM - Re: Oil Hose (Martin Tuck) 9. 06:40 PM - Rubber Engine Mounts (Martin Tuck) ________________________________ Message 1 _____________________________________ Time: 12:49:26 AM PST US From: "Max Cointe (Free)" Subject: RE: Europa-List: Oil Hose So did I with normal (but adequate) oil hose. Just take of care of the route you give to it and avoid short turns! Max Cointe F-PMLH Europa XS_TriGear Kit #560-2003 912ULS/AirmasterAP332 540 hours F-PLDJ DynAro MCR 4S Kit #27-2002 912ULSFR/MTProp MTV7A 1660 heures -----Message d'origine----- De: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] De la part de Alan Burrill Envoy: mardi 3 mars 2015 08:08 : Europa Forum Forum Objet: Re: Europa-List: Oil Hose Replaced mine last year and used normal oil hose with no bends and no 90 deg bend on the pump. route of hose work ok without any kinks or tight bends. Alan G-OBJT > On 3 Mar 2015, at 04:59, Martin Tuck wrote: > > > Hi All, > > I'm looking to replace my oil hoses. The one from the pump to the radiator has a 90 deg bend in it. I had noted that it was suggested I contact Lockwood as they have a metal 90 deg adapter to which regular hose could be fitted. I contacted them and they said just to use 'an AN fitting size -8'. Looking at the manual though the thread seems to be 14.4mm so I'm not sure what they meant now. I wonder if they meant to make a 90 deg elbow using AN fittings. I couldn't figure the parts I would need though. > > Any help as to what others have done would be appreciated. > > Also, are there any US sources for the rubber engine mounts or are they uniquely Europa, in which case I would contact the factory in the UK. > > Regards, > Martin Tuck > N152MT > Wichita, KS > > > > ________________________________ Message 2 _____________________________________ Time: 02:23:54 AM PST US Subject: Europa-List: EUROPA TRAILER From: "hanaperrod" Due to a change in circumstances I have a large aluminium clad enclosed twin axle trailer for sale 12v winch good tyres ready to use ( been used for Europa mono Needs mod for Tri gear). Pm me for more info and photos. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=438913#438913 ________________________________ Message 3 _____________________________________ Time: 04:15:10 AM PST US From: alan.twigg775@gmail.com Subject: Re: Europa-List: EUROPA TRAILER How long, I have a Motorglider mono. Sent from my iPhone > On 3 Mar 2015, at 10:23, "hanaperrod" wrote: > > > Due to a change in circumstances I have a large aluminium clad enclosed twin axle trailer for sale 12v winch good tyres ready to use ( been used for Europa mono Needs mod for Tri gear). Pm me for more info and photos. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=438913#438913 > > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 05:10:04 AM PST US Subject: Europa-List: Re: Oil Hose From: "h&jeuropa" Martin, You need a AN8-M14.5 adaptor. The old Rotax PN was 956641 but it doesnt appear in the parts list any longer. You can buy them at lots of places. I often use Summit Racing for AN fittings. The page with the adaptor is http://www.summitracing.com/search/part-type/an-to-metric-adapter-fittings/fitting-size-2/14mm-x-1-5/fitting-size-1/minus-8-an?N=4294920733%2B4294920642%2B4294947250&SortBy=Default&SortOrder=Default You will also need a 90 deg hose end and I purchased Aeroquip FNC0820 hose for this. Works fine. Jim Read this topic online here: http://forums.matronics.com/viewtopic.php?p=438917#438917 ________________________________ Message 5 _____________________________________ Time: 06:10:36 AM PST US Subject: Europa-List: Re: EUROPA TRAILER From: "hanaperrod" 27feet Read this topic online here: http://forums.matronics.com/viewtopic.php?p=438929#438929 ________________________________ Message 6 _____________________________________ Time: 12:21:51 PM PST US From: AUVRAY Michel Subject: Re: Europa-List: Oil Hose One very good solution for the oil hose is "Parker Push-lok 836" 1/2 " colour blue 150C max Michel AUVRAY Le 03/03/2015 05:59, Martin Tuck a crit : > > Hi All, > > I'm looking to replace my oil hoses. The one from the pump to the > radiator has a 90 deg bend in it. I had noted that it was suggested I > contact Lockwood as they have a metal 90 deg adapter to which regular > hose could be fitted. I contacted them and they said just to use 'an > AN fitting size -8'. Looking at the manual though the thread seems to > be 14.4mm so I'm not sure what they meant now. I wonder if they meant > to make a 90 deg elbow using AN fittings. I couldn't figure the parts > I would need though. > > Any help as to what others have done would be appreciated. > > Also, are there any US sources for the rubber engine mounts or are > they uniquely Europa, in which case I would contact the factory in the > UK. > > Regards, > Martin Tuck > N152MT > Wichita, KS > > ________________________________ Message 7 _____________________________________ Time: 02:08:57 PM PST US From: "Paul McAllister" Subject: RE: Europa-List: Oil Hose Hello Everyone, Although slightly off topic, I did go down the route of replacing all of my hoses with AN fittings and very flexible steel braided hose from Pegasus Racing. Frans did the same but he used the Kevlar version of the hose which is even more flexible. I had to TIG weld on some fittings onto my oil tank and make a banjo for the sump, although I believe there is a Rotax part for this. It's an expensive exercise, it cost me about $500 at the time, but I no longer have to be concerned about hoses chaffing or getting too hot. I have attached the bill of materials and the part numbers are from the Pegasus catalogue Paul ________________________________ Message 8 _____________________________________ Time: 06:35:09 PM PST US From: Martin Tuck Subject: Re: Europa-List: Oil Hose Thank you all who responded for taking the time to provide some very helpful information. Martin Tuck On 3/3/2015 4:06 PM, Paul McAllister wrote: > Hello Everyone, > > Although slightly off topic, I did go down the route of replacing all of my hoses with AN fittings and very flexible steel braided hose from Pegasus Racing. Frans did the same but he used the Kevlar version of the hose which is even more flexible. > > I had to TIG weld on some fittings onto my oil tank and make a banjo for the sump, although I believe there is a Rotax part for this. > > It's an expensive exercise, it cost me about $500 at the time, but I no longer have to be concerned about hoses chaffing or getting too hot. > > I have attached the bill of materials and the part numbers are from the Pegasus catalogue > > > Paul ________________________________ Message 9 _____________________________________ Time: 06:40:55 PM PST US From: Martin Tuck Subject: Europa-List: Rubber Engine Mounts Does anyone know if the MT04 mounts in the Europa Engine install manual are the same as the Lord //J 3608-1 mounts as specified in the Rotax installation manual? Regards, Martin Tuck ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.