---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 07/19/15: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:01 AM - Re: Propeller/engine vibration (JohnFrance) 2. 03:13 AM - Kuntzelman (Airworld) Combi strobe lighting (Steven Pitt) 3. 04:02 AM - Re: Mag drop (rampil) 4. 04:32 AM - Thanks for the Invitation to the BBQ Event Yesterday ....... (Bob Harrison) 5. 05:06 AM - Re: Re: Mag drop (William Daniell) 6. 06:31 AM - Re: Thanks for the Invitation to the BBQ Event Yesterday ....... (Mike Gamble) ________________________________ Message 1 _____________________________________ Time: 03:01:16 AM PST US Subject: Europa-List: Re: Propeller/engine vibration From: "JohnFrance" <77alembert@gmail.com> Here is an update on my vibration problem. I checked balance of the carburettors they were perfect, checked all engine mounts, carburettor mounts electrical connections on ignition circuit including ht leads and air box and everything looks fine. I cleaned the propeller (again) very thoroughly and went for a flight. The vibration has disappeared! Just the normal area where it is not so smooth at 4800 rpm. The vibration through the rudder pedals has also disappeared. I must admit I am confused as I have not identified a cause. Regards John -------- Europa mono Nr 192 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=444932#444932 ________________________________ Message 2 _____________________________________ Time: 03:13:00 AM PST US From: "Steven Pitt" Subject: Europa-List: Kuntzelman (Airworld) Combi strobe lighting Does anyone have a copy of the combi wiring diagram for this product as I cannot find a copy online. It should have at least 5 wires going to the heads. Thanks Steve Pitt G-SMDH ________________________________ Message 3 _____________________________________ Time: 04:02:43 AM PST US Subject: Europa-List: Re: Mag drop From: "rampil" The easiest first step is to make sure your spark plug cables are firmly attached to the plugs. -------- Ira N224XS Read this topic online here: http://forums.matronics.com/viewtopic.php?p=444934#444934 ________________________________ Message 4 _____________________________________ Time: 04:32:27 AM PST US From: "Bob Harrison" Subject: Europa-List: Thanks for the Invitation to the BBQ Event Yesterday ....... Hi! David/all. I would just like to thank you and all the Gloucester Strut for the event and BBQ organised yesterday at Gloucester Airport (EGBJ ). The air traffic control and the Museum staff were well worthy of favourable comment too. My Brother John and I enjoyed the New Jet Age Museum also, particularly the "stand" on the Gloucester Meteor! Best regards Bob Harrison G-PTAG Europa 914 Trike. ________________________________ Message 5 _____________________________________ Time: 05:06:46 AM PST US Subject: Re: Europa-List: Re: Mag drop From: William Daniell Ira, Thanks...sound advice. Actually one of them is loose, possibly broken. Didnt have time to examine thoroughly yesterday (didnt have my tools and exhaust burn discouraged me from further fiddling) and my guru said..."mmm sounds like a plug or plug lead". After that i will follow karls advice. Thanks again Will On Jul 19, 2015 6:05 AM, "rampil" wrote: > > The easiest first step is to make sure your spark plug cables are firmly > attached to the plugs. > > -------- > Ira N224XS > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=444934#444934 > > ________________________________ Message 6 _____________________________________ Time: 06:31:38 AM PST US From: "Mike Gamble" Subject: RE: Europa-List: Thanks for the Invitation to the BBQ Event Yesterday ....... I second that. The whole event organisation was faultless and those doing the work are to be congratulated. The food quality and quantity deserves special mention ( my wife noticed a significant loss of appetite at my evening meal!) Good to see the old Meat Boxes again and the Vulcan seemed a lot more cramped than I remember from my brief flight in her back in '62 or thereabouts. Coincidently we were warned of and saw the flying model with the red arrows go below us on the return flight to Popham. (not quick enough with the camera) Thanks again chaps. Mike Gamble XS Mono G-CFMP Hi! David/all. I would just like to thank you and all the Gloucester Strut for the event and BBQ organised yesterday at Gloucester Airport (EGBJ ). The air traffic control and the Museum staff were well worthy of favourable comment too. My Brother John and I enjoyed the New Jet Age Museum also, particularly the "stand" on the Gloucester Meteor! Best regards Bob Harrison G-PTAG Europa 914 Trike. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.