---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 07/28/15: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:07 AM - Re: NBR ruber fuel line question (Brian Davies) 2. 04:01 AM - Re: NBR ruber fuel line question (Jan de Jong) 3. 04:20 AM - Re: NBR ruber fuel line question (Remi Guerner) ________________________________ Message 1 _____________________________________ Time: 02:07:50 AM PST US From: "Brian Davies" Subject: RE: Europa-List: NBR ruber fuel line question Jan, That is Gates 27304 Barricade hose that meets just about every requirement you could think of. Manufactured to meet the California emission regulations for low permeability hose. It is very hard to get in the UK and is expensive. Amazon UK are selling a 24 inch length of 5/16 inch ( 8mm) for UK 6.28 plus postage. The supplier is Hires Auto Parts International who will sell a 25 feet roll. Probably the best you can get. Regards Brian -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Jan de Jong Sent: 27 July 2015 17:14 Subject: Re: Europa-List: NBR ruber fuel line question I bought this stuff: http://www.nickstruckparts.com/fuelhose.html Don't know where to get it in Europe.. Jan de Jong On 7/27/2015 5:00 PM, Nigel Graham wrote: > I'm not sure when DIN 73379 was introduced, but it may have been > before ethanol was incorporated into fuel (and might not therefore > guarantee compatibility), certainly ethanol does react with some > synthetic rubbers. > As a subject that is close to my heart, I have collected some > informative documents (credits in documents), two of which I attach FYI. > > Nigel > > > On 27/07/2015 13:18, JohnFrance wrote: >> --> <77alembert@gmail.com> >> >> To the experts out there who have knowledge of fuel lines and >> material quality, I would like your opinion on the following tubing. >> It is rated at 10 bar, has no internal reinforcing but has a cotton >> over-braiding. In theory it is more than adequate for the job as I >> have a pressure regulator limiting to 2.3 psi but I would like to >> have your ideas on this product please? >> >> http://www.advancedfluidsolutions.co.uk/6mm-id-14-cotton-over-braided >> -nitrile-fuel-hose-pipe-tubing-279-p.asp >> >> >> regards >> John >> >> -------- >> Europa mono Nr 192 >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=445224#445224 >> >> >> >> >> >> >> >> >> >> >> > ----- No virus found in this message. Checked by AVG - www.avg.com ________________________________ Message 2 _____________________________________ Time: 04:01:47 AM PST US From: Jan de Jong Subject: Re: Europa-List: NBR ruber fuel line question Brian, yes. The only slight downside (apart from the price) is the acceptable but not great kink resistance for the larger diameters. Regards, Jan On 7/28/2015 11:06 AM, Brian Davies wrote: > > Jan, > > That is Gates 27304 Barricade hose that meets just about every requirement > you could think of. Manufactured to meet the California emission > regulations for low permeability hose. It is very hard to get in the UK and > is expensive. Amazon UK are selling a 24 inch length of 5/16 inch ( 8mm) > for UK 6.28 plus postage. The supplier is Hires Auto Parts International > who will sell a 25 feet roll. Probably the best you can get. > > Regards > > Brian > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Jan de Jong > Sent: 27 July 2015 17:14 > To: europa-list@matronics.com > Subject: Re: Europa-List: NBR ruber fuel line question > > > I bought this stuff: > http://www.nickstruckparts.com/fuelhose.html > Don't know where to get it in Europe.. > Jan de Jong > > On 7/27/2015 5:00 PM, Nigel Graham wrote: >> I'm not sure when DIN 73379 was introduced, but it may have been >> before ethanol was incorporated into fuel (and might not therefore >> guarantee compatibility), certainly ethanol does react with some >> synthetic rubbers. >> As a subject that is close to my heart, I have collected some >> informative documents (credits in documents), two of which I attach FYI. >> >> Nigel >> >> >> On 27/07/2015 13:18, JohnFrance wrote: >>> --> <77alembert@gmail.com> >>> >>> To the experts out there who have knowledge of fuel lines and >>> material quality, I would like your opinion on the following tubing. >>> It is rated at 10 bar, has no internal reinforcing but has a cotton >>> over-braiding. In theory it is more than adequate for the job as I >>> have a pressure regulator limiting to 2.3 psi but I would like to >>> have your ideas on this product please? >>> >>> http://www.advancedfluidsolutions.co.uk/6mm-id-14-cotton-over-braided >>> -nitrile-fuel-hose-pipe-tubing-279-p.asp >>> >>> >>> regards >>> John >>> >>> -------- >>> Europa mono Nr 192 >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=445224#445224 >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > > ________________________________ Message 3 _____________________________________ Time: 04:20:51 AM PST US Subject: Europa-List: Re: NBR ruber fuel line question From: "Remi Guerner" Hi John, My aircraft is 15 years/1235 hours old, so I had to replace all fuel hoses twice. I have always used Gates 3225 hose and I always found the 5 years old hoses to be in very good shape, inside and out. Of course I am using Mogas (unleaded 98). These hoses are inexpensive and can be purchased over the counter at any AD (Auto Distribution) store. I am sure there is one not far from your home. For technical details see: http://ww2.gates.com/france/brochure.cfmbrochure=7803&location_id=11152 Best regards Remi Read this topic online here: http://forums.matronics.com/viewtopic.php?p=445296#445296 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.