---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 09/08/15: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:21 AM - Airmaster Blades AP332 () 2. 02:35 AM - Re: Electrics on a Europa. (Alan Carter) 3. 09:57 AM - Re: Arblast PV 50 Prop. CS Motor, (nigel_graham@m-tecque.co.uk) 4. 12:50 PM - Re: Arblast PV 50 Prop. CS Motor, (Alan Carter) 5. 02:43 PM - Vacuum Pump Blank (Timward) 6. 02:55 PM - Re: Arblast PV 50 Prop. CS Motor, (Kevin) ________________________________ Message 1 _____________________________________ Time: 01:21:41 AM PST US From: Subject: Europa-List: Airmaster Blades AP332 I=C2-am looking for a set of Airmaster (warpdrive or equiv) =C2-paralle l blades for the AP 332 its for a 812S engine I have the Hub :-( thanks in advance rgdsDavid JoyceThe other one =C2-Sent to you=C2-by David Joyce www.eastmidsspas.com=C2- =C2- =C2- ________________________________ Message 2 _____________________________________ Time: 02:35:05 AM PST US Subject: Europa-List: Re: Electrics on a Europa. From: "Alan Carter" Hi Bob ,Brian. Thank for posting, As you can see I have another problem with the Prop, PV50. This has taken priority over my electrical problem, but will do as you say when have the time, As far as I can make out nothing is running with all the CBs pulled, the TCU I can hear, but pull the CB and it stops, turning every thing back on, does not draw that much, the volt meter drops just a Little. Every CB pulled, turn Master off and the voltmeter jumps up. Alan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=446878#446878 ________________________________ Message 3 _____________________________________ Time: 09:57:10 AM PST US From: nigel_graham@m-tecque.co.uk Subject: Re: Europa-List: Arblast PV 50 Prop. CS Motor, Alan, I think you will have difficulty sourcing a new replacement from the factory as I understand that Arplast have ceased trading. I do however have a spare "pre-owned" PV50 front end comprising good motor, screwgear and pitch limit switch block. It's a pretty straight forward job to swap it out but your work will need inspecting and approving before your aircraft can be returned to service. If you are interested, contact me off-list. Nigel Quoting Alan Carter : > > Hi All. > My PV50 CS motor failed in the climb out, just maintained 80 kts, > high nose attitude but made it home. > After landing found power reaching the motor, 11.9 volts, so its the > motor that's failed. > > Q1. Where do I get a new PV 50 CS electric motor from. > > Q2. Which bit is the motor, or how do you take the motor out, > Long shaft with motor on the end of it, this piece of shaft with > motor on it is secured with three small bolts to the prop, is this > the complete unit to be replaced, > > OR is it the little black motor on the end of the shaft only needs > replacing. ie unsolder the two wire, and with a pair of grips turn > and unscrew the motor off the end of the Shaft. > > Alan > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=446864#446864 > > ________________________________ Message 4 _____________________________________ Time: 12:50:21 PM PST US Subject: Europa-List: Re: Arblast PV 50 Prop. CS Motor, From: "Alan Carter" Hi, Nigel. I will be in touch, when I get you number from the Europa Club. Regards Alan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=446894#446894 ________________________________ Message 5 _____________________________________ Time: 02:43:43 PM PST US Subject: Europa-List: Vacuum Pump Blank From: Timward Hi all, I am changing from Analog to EFIS for my flight instruments and will have to remove my vacuum pump from the Rotax 912s engine. Has anyone got a blank that covers the connection of the pump to the engine? Cheers, Tim Tim Ward 12 Waiwetu Street Fendalton, Christchurch, 8052 New Zealand. ward.t@xtra.co.nz Ph 64 3 3515166 Mob 0210640221 ________________________________ Message 6 _____________________________________ Time: 02:55:53 PM PST US From: Kevin Subject: Re: Europa-List: Arblast PV 50 Prop. CS Motor, Hi Guys, Is anybody aware of anybody interested in supporting Arplast vp 50 owners in the UK ? There must be a fair few in service here. Regards Kevin Sent from my iPhone > On 8 Sep 2015, at 17:56, nigel_graham@m-tecque.co.uk wrote: > > > Alan, > > I think you will have difficulty sourcing a new replacement from the factory as I understand that Arplast have ceased trading. > I do however have a spare "pre-owned" PV50 front end comprising good motor, screwgear and pitch limit switch block. It's a pretty straight forward job to swap it out but your work will need inspecting and approving before your aircraft can be returned to service. > > If you are interested, contact me off-list. > > Nigel > > Quoting Alan Carter : > >> >> Hi All. >> My PV50 CS motor failed in the climb out, just maintained 80 kts, high nose attitude but made it home. >> After landing found power reaching the motor, 11.9 volts, so its the motor that's failed. >> >> Q1. Where do I get a new PV 50 CS electric motor from. >> >> Q2. Which bit is the motor, or how do you take the motor out, >> Long shaft with motor on the end of it, this piece of shaft with motor on it is secured with three small bolts to the prop, is this the complete unit to be replaced, >> >> OR is it the little black motor on the end of the shaft only needs replacing. ie unsolder the two wire, and with a pair of grips turn and unscrew the motor off the end of the Shaft. >> >> Alan >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=446864#446864 > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.