----------------------------------------------------------
                           Europa-List Digest Archive
                                      ---
                     Total Messages Posted Mon 01/11/16: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:29 AM - Re: N951EU Tri-gear up and flying  (SPURPURA)
     2. 07:12 AM - Re: Fuel valve - placard, and mud bar/fender - Mono  (JohnFrance)
     3. 10:32 PM - Tail wheel fork  (bill mcclellan)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:29:36 AM PST US
Subject: Europa-List: Re: N951EU Tri-gear up and flying
From: "SPURPURA" <SPURPURA@aol.com>


Based at KAPV now.

--------
I'D RATHER HAVE A BOTTLE IN FRONT OF ME THAN A FRONTAL LABOTAMY.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=451867#451867


________________________________  Message 2  _____________________________________


Time: 07:12:18 AM PST US
Subject: Europa-List: Re: Fuel valve - placard, and mud bar/fender - Mono
From: "JohnFrance" <77alembert@gmail.com>


I was cleaning mud out yesterday and wondered if I could carefully use a jet wash.[/quote]

Tape over the gear lever slot beforehand!

When will the Europa have a mod to make it an amphibian.
This could be very useful, especially in the UK [Wink] 

do not archive

--------
Europa mono Nr 192


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=451871#451871


________________________________  Message 3  _____________________________________


Time: 10:32:38 PM PST US
Subject: Europa-List: Tail wheel fork
From: "bill mcclellan" <wilwood@earthlink.net>


I have the tailwheel fork which has the slot cut out on the inside of the fork
which defeats the purpose of having an enclosed capsule to contain the grease.
Might there be anyone who has a tailwheel fork without the slot they are not
going to use, maybe because of converting from a mono to a tri.  I have attached
a picture to show the slot I am talking about.

Additionally I have an unused mono aluminum rim, axle and brakes I am not going
to use if they are of interest to anyone.

Thanks,
Bill


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=451897#451897


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               europa-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Europa-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/europa-list
Browse Digests                   http://www.matronics.com/digest/europa-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.