---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 02/04/16: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:29 AM - Re: Re: Door gas strut metal ends (Alasdair Milne) 2. 01:37 AM - Save the date: Texel Fly-In 26th-28th August (Roland) 3. 01:46 AM - Re: Door gas strut metal ends (Miss Europa) 4. 06:39 AM - Re: Fuel flow transducer 914 (Raimo Toivio) 5. 07:29 AM - Re: Fuel flow transducer 914 (Alan Burrill) 6. 09:01 AM - Re: Radio & Transponder (Clive Sutton) 7. 10:39 AM - Re: Radio & Transponder (BobD) 8. 02:03 PM - Re: Radio & Transponder (Clive Sutton) 9. 05:47 PM - Re: Fuel flow transducer 914 (Jan de Jong) ________________________________ Message 1 _____________________________________ Time: 12:29:36 AM PST US From: "Alasdair Milne" Subject: RE: Europa-List: Re: Door gas strut metal ends Steve, Please add two gas struts to the order. Mine have corroded - thats posh for rusty - and I will replace rather than repressurise and paint. Alasdair -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Steven Pitt Sent: 03 February 2016 12:09 Subject: Re: Europa-List: Re: Door gas strut metal ends --> Thanks for the info Graeme. I have made contact with Chris Lisseman and will arrange to go and see him with my gas strut and ball ends to arrange to buy a small stock. Their minimum charge is 25 so I would be happy to purchase a small number for other members of the Club. Steve Pitt ----- Original Message ----- From: "graeme bird" Sent: Tuesday, February 02, 2016 9:43 PM Subject: Europa-List: Re: Door gas strut metal ends > > Chris Lisseman > > Technical Sales Engineer > > Description: Description: cid:image002.png@01CD2C3F.0A789990 > > Industrial Gas Springs Ltd > > * 22 Wates Way, Mitcham, Surrey, CR4 4HR ( +020 8646 6595 S 020 8646 > 6594 / sales@igsltd.co.uk > > www.industrialgassprings.com > > -------- > Graeme Bird > G-UMPY > Mono Classic/XS FFW 912S/Woodcomp 3000/3W > Newby: 200 hours 4 years on the Mono > g(at)gdbmk.co.uk > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=452535#452535 > > > ________________________________ Message 2 _____________________________________ Time: 01:37:19 AM PST US Subject: Europa-List: Save the date: Texel Fly-In 26th-28th August From: "Roland" Dear all, make sure to be part of this great event. http://www.texelflyin.nl/participants-list/ Looking forward to meeting you there (again) :D Roland PH-ZTI XS TG 914 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452598#452598 ________________________________ Message 3 _____________________________________ Time: 01:46:57 AM PST US Subject: Europa-List: Re: Door gas strut metal ends From: "Miss Europa" Hi everyone! Just to let you know that Europa Aircraft (2004) Ltd has stock of Gas Struts and replacement metal, plastic and ball ends. Please ring 01751 431773 if you would like to order. We very much appreciate your business! -------- Karen Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452599#452599 ________________________________ Message 4 _____________________________________ Time: 06:39:06 AM PST US Subject: Re: Europa-List: Fuel flow transducer 914 From: Raimo Toivio My system has calculated well and accurately with one transducer only (between a returning fuel T and carburrettors). Cannot understand reason for two transducers... Raimo allekirjoitus 26.1.2016, 22:35, William Daniell kirjoitti: > Would I be correct in assuming that to calculate the fuel flow you > need to measure the outgoing fuel and then subtract the returning fuel? > > So one needs two transducers.... > > thanks > > Will > > > William Daniell > LONGPORT > +57 310 295 0744 ________________________________ Message 5 _____________________________________ Time: 07:29:44 AM PST US From: Alan Burrill Subject: Re: Europa-List: Fuel flow transducer 914 Mine as well. Alan Sent from my iPad > On 4 Feb 2016, at 14:38, Raimo Toivio wrote: > > My system has calculated well and accurately with one transducer only (bet ween a returning fuel T and carburrettors). > Cannot understand reason for two transducers... > > Raimo > 26.1.2016, 22:35, William Daniell kirjoitti: >> Would I be correct in assuming that to calculate the fuel flow you need t o measure the outgoing fuel and then subtract the returning fuel? >> >> So one needs two transducers.... >> >> thanks >> >> Will >> >> >> William Daniell >> LONGPORT >> +57 310 295 0744 > ________________________________ Message 6 _____________________________________ Time: 09:01:19 AM PST US Subject: Europa-List: Re: Radio & Transponder From: "Clive Sutton" Hi Bob, I am at a similar stage and soon to fix my instrumentation kit out. did have a GTX328 and found someone in the UK who wanted it, and also found someone in the US to buy my Garmin SL40 radio I don't know anything about your radio but the Garmin 327 should be good for mode S and for ADS-B out - if you can get it tweaked by Garmin and supply it with an NMEA GPS feed. I will fit a TRIG TY91 Xponder and an TT21 Radio and dump my steam instruments to go to an iPad Mini4 wi-fi'ed to an iLevil to provide AHRS as well as Engine condition data via a GRT EIS 4000. Hope it helps Clive. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452606#452606 ________________________________ Message 7 _____________________________________ Time: 10:39:11 AM PST US Subject: Europa-List: Re: Radio & Transponder From: "BobD" Hi Clive, Thanks for your response. I don't think it is possible to get the 327 upgraded, at least I've not been able to find this option via Google. The Trig TY91 Radio, and TT21 Transponder do appear attractive, with the small footprint, and I will certainly be considering these for my new Panel. I would be interested to know how you sold your 'old' kit (i.e. was it just e-bay), and an idea of the price you got, so I have a guide price. PM me if you prefer. Best Regards Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452607#452607 ________________________________ Message 8 _____________________________________ Time: 02:03:41 PM PST US Subject: Europa-List: Re: Radio & Transponder From: "Clive Sutton" Hi Bob, I suggest to use eBay to find prices others are selling for and then advertise using AFORS. Clive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=452610#452610 ________________________________ Message 9 _____________________________________ Time: 05:47:42 PM PST US From: Jan de Jong Subject: Re: Europa-List: Fuel flow transducer 914 Turbo engine fuel system is different. Normal flow rates would be: - forward flow 100 l/h - carburettor flow 20 l/h - return flow 80 l/h. Jan On 2/4/2016 4:28 PM, Alan Burrill wrote: > Mine as well. > > Alan > > Sent from my iPad > > On 4 Feb 2016, at 14:38, Raimo Toivio > wrote: > >> My system has calculated well and accurately with one transducer only >> (between a returning fuel T and carburrettors). >> Cannot understand reason for two transducers... >> >> Raimo >> allekirjoitus >> 26.1.2016, 22:35, William Daniell kirjoitti: >>> Would I be correct in assuming that to calculate the fuel flow you >>> need to measure the outgoing fuel and then subtract the returning fuel? >>> >>> So one needs two transducers.... >>> >>> thanks >>> >>> Will >>> >>> >>> William Daniell >>> LONGPORT >>> +57 310 295 0744 >> ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.