Today's Message Index:
----------------------
1. 01:41 AM - Re: Re: Monowheel brake caliper (Nigel Graham)
2. 11:44 AM - Re: Re: Monowheel brake caliper (david park)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Monowheel brake caliper |
As a public service, I've just gone down to a very chilly workshop to
weigh these bits for you. I hope you appreciate the effort!
The Matco wheel (with bearings), disc and caliper weigh 2.917 Kg each
(5.834 Kg per pair).
The advertised weight of the Beringer equivalent is 1.977 Kg each (3.954
Kg per pair) for the lightweight 5.00 x 5 p/n RF-002
or 2.445 Kg (4.89 KG per pair) for the heavy duty 5.00 x 5 p/n RF-005
This would indicate a weight savings on the mains (I can't get to my
nosewheel to weigh it) of 1.88 Kg or 0.944 Kg depending on which option
you go for.
The Beringer also uses twin pistons as standard and is beautifully CNCd
and anodised as standard.
I can't see why these would not make a worthwhile replacement for a
standard tri-gear. I intend to use them on my "Conventional".
Nigel
On 25/02/2016 14:48, david park wrote:
>
> I would also be interested in the weight saving. Just replacing wheel tyre and
disc and caliper on mains and nose wheel and tyre.
> Dave G-LDVO
>
> Sent from my iPhone
>
>
>> On 25 Feb 2016, at 10:38, flyingphil2 <flyingphil627-europastuff@yahoo.co.uk>
wrote:
>>
>>
>> The Beringer kit does indeed look lovely stuff.
>>
>> They have a kit for a mono but has anyone used their parts on a Europa tri-gear
or conventional taildragger? Any idea what the weight saving would be?
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=453157#453157
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Monowheel brake caliper |
Thanks for info sounds like an expensive 4 pounds saving!!!
Dave G-LDVO
Sent from my iPhone
> On 27 Feb 2016, at 09:40, Nigel Graham <nigel_graham@m-tecque.co.uk> wrote:
>
>
> As a public service, I've just gone down to a very chilly workshop to weigh these
bits for you. I hope you appreciate the effort!
>
> The Matco wheel (with bearings), disc and caliper weigh 2.917 Kg each (5.834
Kg per pair).
> The advertised weight of the Beringer equivalent is 1.977 Kg each (3.954 Kg per
pair) for the lightweight 5.00 x 5 p/n RF-002
> or 2.445 Kg (4.89 KG per pair) for the heavy duty 5.00 x 5 p/n RF-005
>
> This would indicate a weight savings on the mains (I can't get to my nosewheel
to weigh it) of 1.88 Kg or 0.944 Kg depending on which option you go for.
> The Beringer also uses twin pistons as standard and is beautifully CNCd and anodised
as standard.
>
> I can't see why these would not make a worthwhile replacement for a standard
tri-gear. I intend to use them on my "Conventional".
>
> Nigel
>
>> On 25/02/2016 14:48, david park wrote:
>>
>> I would also be interested in the weight saving. Just replacing wheel tyre and
disc and caliper on mains and nose wheel and tyre.
>> Dave G-LDVO
>>
>> Sent from my iPhone
>>
>>
>>> On 25 Feb 2016, at 10:38, flyingphil2 <flyingphil627-europastuff@yahoo.co.uk>
wrote:
>>>
>>>
>>> The Beringer kit does indeed look lovely stuff.
>>>
>>> They have a kit for a mono but has anyone used their parts on a Europa tri-gear
or conventional taildragger? Any idea what the weight saving would be?
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=453157#453157
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|