Today's Message Index:
----------------------
1. 09:21 AM - Re: Sun 'n Fun 2016 - seeking advise (rampil)
2. 03:54 PM - Re: Re: Sun 'n Fun 2016 - seeking advise (Steven Pitt)
3. 04:24 PM - rotax vacuum pump query (Rowland Carson)
4. 04:44 PM - Re: rotax vacuum pump query (Tim Ward)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Sun 'n Fun 2016 - seeking advise |
I don't know if anyone still cares, but for those with sticker shock
relative to hotel accommodations in Lakeland, I can tell you that
equivalent or better hotels are still available in Brandon (10 mi West,
near Bud's shop) for $50 - 100. per night less. I just book a Marriott
Fairfield for 137/night. Better restaurants in the Brandon too.
--------
Ira N224XS
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=453942#453942
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Sun 'n Fun 2016 - seeking advise |
Ira,
See you in a couple of weeks - the Brits are on their way!!!
Steve
----- Original Message -----
From: "rampil" <ira.rampil@gmail.com>
Sent: Sunday, March 20, 2016 3:57 PM
Subject: Europa-List: Re: Sun 'n Fun 2016 - seeking advise
>
> I don't know if anyone still cares, but for those with sticker shock
> relative to hotel accommodations in Lakeland, I can tell you that
> equivalent or better hotels are still available in Brandon (10 mi West,
> near Bud's shop) for $50 - 100. per night less. I just book a Marriott
> Fairfield for 137/night. Better restaurants in the Brandon too.
>
> --------
> Ira N224XS
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=453942#453942
>
>
>
>
>
>
>
>
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | rotax vacuum pump query |
I disposed of my vacuum instruments before I got around to installing them, and
have also sold the vacuum pump before I ever installed it.
I have now got my engine out of the dark box where its been hiding and hung it
on the Europa (just for a trial fit to sort out wire and cable runs etc - havent
got the firewall sorted out yet). Now that I can get a good look at it, I see
theres a spacer plate on the vacuum pump pad - see pictures:
https://www.dropbox.com/s/pxpf1xhqla0gjce/p1150299_scaled.jpg?dl=0
https://www.dropbox.com/s/of6ho655x99bj92/p1150300_scaled.jpg?dl=0
However, as you can see in the 2nd picture the nuts that hold it dont screw onto
the studs far enough to secure the spacer before they become threadbound, so
the spacer will be rattling around and the nuts wont be secured. So, what should
I do? Add another little piece of aluminium plate thick enough to allow the
nuts to be done up? Remove the spacer, nuts and spring washers leaving the studs
empty and the drive splines exposed (doesnt sound quite right!)?
It appears from the Rotax illustrated parts catalogue that there is a plug which
fits inside the gearbox aperture when the vacuum pump drive is not fitted, but
obviously Id have to do quite a bit of dismantling to use that.
in friendship
Rowland
| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson@gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson
| pictures: http://picasaweb.google.com/rowlandcarson
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: rotax vacuum pump query |
Hi Rowland,
I removed my Vacuum Pump for a glass screen Instrument Panel last year.
What I did and as you say,
"Add another little piece of aluminium plate thick enough to allow the nuts
to be done up."
I sealed it with a gasket sealant and it covered the Vacuum Drive slot.
Cheers,
Tim
Tim Ward,
12 Waiwetu Street,
Fendalton,
Christchurch 8052
New Zealand
Ph; 03 3515166
Mob; 0210640221
email; ward.t@xtra.co.nz
-----Original Message-----
From: Rowland Carson
Sent: Monday, March 21, 2016 12:23 PM
Subject: Europa-List: rotax vacuum pump query
I disposed of my vacuum instruments before I got around to installing them,
and have also sold the vacuum pump before I ever installed it.
I have now got my engine out of the dark box where its been hiding and hung
it on the Europa (just for a trial fit to sort out wire and cable runs etc -
havent got the firewall sorted out yet). Now that I can get a good look at
it, I see theres a spacer plate on the vacuum pump pad - see pictures:
https://www.dropbox.com/s/pxpf1xhqla0gjce/p1150299_scaled.jpg?dl=0
https://www.dropbox.com/s/of6ho655x99bj92/p1150300_scaled.jpg?dl=0
However, as you can see in the 2nd picture the nuts that hold it dont screw
onto the studs far enough to secure the spacer before they become
threadbound, so the spacer will be rattling around and the nuts wont be
secured. So, what should I do? Add another little piece of aluminium plate
thick enough to allow the nuts to be done up? Remove the spacer, nuts and
spring washers leaving the studs empty and the drive splines exposed (doesnt
sound quite right!)?
It appears from the Rotax illustrated parts catalogue that there is a plug
which fits inside the gearbox aperture when the vacuum pump drive is not
fitted, but obviously Id have to do quite a bit of dismantling to use that.
in friendship
Rowland
| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson@gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson
| pictures: http://picasaweb.google.com/rowlandcarson
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|