Today's Message Index:
----------------------
1. 12:22 PM - Re: Arplast news (italianjon)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Arplast news |
Hi Ken,
It's comforting to know that I am not alone. The worst part is no real source of
information. As you mention, the specs would be nice, even to source a supplier
for our own parts.
I looked last week at the Nylon blocks and, I agree, they don't look easy to replace.
The best option seems to be if a complete set of dogs with blocks can be
sourced. Otherwise I foresee a small swing press being needed.
What symptoms do you have? Mine is an RPM dependent seemingly low frequency low
amplitude vibration that you can mainly feel through the rudder pedals and the
fuselage/wheel well if I lean my thighs against them.
It only becomes apparent once airborne, and flap setting, airspeed, even blade
pitch seem to have no effect. Only the change in the RPM. But it seems to always
be present, through all RPM values, and no real change in the amplitude. So
I don't think a resonance is being established anywhere.
I feel OK flying circuits or just off the circuit, but it's just enough to knock
the confidence to go further afield.
Best regards
Jon
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=453991#453991
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|