Today's Message Index:
----------------------
1. 02:58 AM - Dampers (Peter & Anthea Austin)
2. 04:12 AM - Re: Dampers (davidjoyce@doctors.org.uk)
3. 05:11 AM - Do engine bay wires need to be protected from heat? (William Daniell)
4. 05:46 AM - Re: Do engine bay wires need to be protected from heat? (Alan Burrill)
5. 06:52 AM - Re: Do engine bay wires need to be protected from heat? (William Daniell)
6. 07:18 AM - Re: Do engine bay wires need to be protected from heat? (Robert Borger)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hello,
My Landing gear Dampers are shot, so are my landings now!!!
Once removed can they be recharged/serviced or do they need replacement?
Regards
Peter ZK-ZEB
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Peter You may find some going spare from someone who has converted to a
trike. Regards, David Joyce, GXSDJ
On 2016-05-10 10:57, Peter & Anthea Austin wrote:
>
> Hello,
>
> My Landing gear Dampers are shot, so are my landings now!!!
>
> Once removed can they be recharged/serviced or do they need replacement?
>
> Regards
>
> Peter ZK-ZEB
>
Links:
------
[1] http://www.matronics.com/Navigator?Europa-List
[2] http://forums.matronics.com
[3] http://wiki.matronics.com
[4] http://www.matronics.com/contribution
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Do engine bay wires need to be protected from heat? |
Do engine bay wires need to be protected from heat?
I am installing a dynon and the EGT wires come protected with steel braid.
Do the CHT, Oil temp and Oil press etc need to be protected in some way?
If so how?
All is tefzel wire.
Many thanks
Will
William Daniell
LONGPORT
+57 310 295 0744
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Do engine bay wires need to be protected from heat? |
I have all my cables grouped and held by spiral wrap and routed away from th
e exhaust. Apart from that I have no other protection in place.
The only wiring problem I had in the engine bay was a worn through inner wir
e of an EGT probe which shorted to the outer braid.
Alan
G-OBJT
Sent from my iPad
> On 10 May 2016, at 13:10, William Daniell <wdaniell.longport@gmail.com> wr
ote:
>
> Do engine bay wires need to be protected from heat?
>
> I am installing a dynon and the EGT wires come protected with steel braid.
>
> Do the CHT, Oil temp and Oil press etc need to be protected in some way?
If so how?
>
> All is tefzel wire.
>
> Many thanks
> Will
>
>
> William Daniell
> LONGPORT
> +57 310 295 0744
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Do engine bay wires need to be protected from heat? |
Alan
Thanks
Will
On May 10, 2016 7:49 AM, "Alan Burrill" <alanb@dpy01.co.uk> wrote:
> I have all my cables grouped and held by spiral wrap and routed away from
> the exhaust. Apart from that I have no other protection in place.
>
> The only wiring problem I had in the engine bay was a worn through inner
> wire of an EGT probe which shorted to the outer braid.
>
> Alan
>
> G-OBJT
>
> Sent from my iPad
>
> On 10 May 2016, at 13:10, William Daniell <wdaniell.longport@gmail.com>
> wrote:
>
> Do engine bay wires need to be protected from heat?
>
> I am installing a dynon and the EGT wires come protected with steel braid.
>
> Do the CHT, Oil temp and Oil press etc need to be protected in some way?
> If so how?
>
> All is tefzel wire.
>
> Many thanks
> Will
>
>
> William Daniell
> LONGPORT
> +57 310 295 0744
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Do engine bay wires need to be protected from heat? |
William,
Like Alan I have grouped my wiring and run it in the coolest area
possible (above the engine). But, rather than spiral wrap, I have used
cable ties to bundle it and tie it down. So far, so good.
Blue skies & tailwinds,
Bob Borger
Europa XS Tri, Rotax 914, Airmaster C/S Prop (75 hrs).
Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP
3705 Lynchburg Dr.
Corinth, TX 76208-5331
Cel: 817-992-1117
rlborger@mac.com <mailto:rlborger@mac.com>
On May 10, 2016, at 7:10 AM, William Daniell
<wdaniell.longport@gmail.com> wrote:
Do engine bay wires need to be protected from heat?
I am installing a dynon and the EGT wires come protected with steel
braid.
Do the CHT, Oil temp and Oil press etc need to be protected in some
way? If so how?
All is tefzel wire.
Many thanks
Will
William Daniell
LONGPORT
+57 310 295 0744
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|