---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 06/05/16: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:37 AM - Re: New panel (Rowland Carson) 2. 01:04 AM - Re: New panel (ploucandco) 3. 01:05 AM - Re: New panel (davidjoyce@doctors.org.uk) 4. 01:11 AM - Re: New panel (David private) 5. 02:43 AM - Re: New panel (Vince (Groups Email)) 6. 02:45 AM - Re: New panel (Vince (Groups Email)) 7. 02:51 AM - Re: New panel (Vince (Groups Email)) 8. 03:21 AM - Re: New panel (David private) 9. 10:27 AM - Re: New panel (Vince (Groups Email)) 10. 10:28 AM - Re: New panel (Vince (Groups Email)) ________________________________ Message 1 _____________________________________ Time: 12:37:21 AM PST US Subject: Re: Europa-List: New panel From: Rowland Carson On 2016-06-04, at 23:49, Groups wrote: > I have tried searching for a drawing of the sub panels but can not find one that has the dimensions. Does anyone have a usable drawing? Vince - I laid out my panels using CADintosh. That only runs on Mac, but it can do DXF exports which should be readable by most other CAD applications. Let me know if you would like me to send you the DXF files for the main & radio panels. in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson | pictures: http://picasaweb.google.com/rowlandcarson ________________________________ Message 2 _____________________________________ Time: 01:04:06 AM PST US Subject: Europa-List: Re: New panel From: "ploucandco" Vince, here you are. Width 27.807" Height 12.905" Blue skies, Jacques. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=456861#456861 Attachments: http://forums.matronics.com//files/complete_panel_780.gif ________________________________ Message 3 _____________________________________ Time: 01:05:51 AM PST US From: davidjoyce@doctors.org.uk Subject: Re: Europa-List: New panel Vince, You can always do it the pre CAD way - cut your existing panel out where you want the new removable section (with a thin saw), and use the cut out as yourpattern for the new panel. Make paper shapes of dimensions of instruments to go in and play around for best fit. It has worked well for me for three panel designs. Regards, David Joyce, GXSDJ On 2016-06-05 08:36, Rowland Carson wrote: > > On 2016-06-04, at 23:49, Groups wrote: > >> I have tried searching for a drawing of the sub panels but can not find one that has the dimensions. Does anyone have a usable drawing? > > Vince - I laid out my panels using CADintosh. That only runs on Mac, but it can do DXF exports which should be readable by most other CAD applications. Let me know if you would like me to send you the DXF files for the main & radio panels. > > in friendship > > Rowland > > Links: ------ [1] http://www.rowlandcarson.org.uk [2] http://picasaweb.google.com/rowlandcarson [3] http://www.matronics.com/Navigator?Europa-List [4] http://forums.matronics.com [5] http://wiki.matronics.com [6] http://www.matronics.com/contribution ________________________________ Message 4 _____________________________________ Time: 01:11:37 AM PST US From: David private Subject: Re: Europa-List: New panel Vince I have a complete scuttle that was removed from my aircraft if you arrange c ollection you can have it to play around with and make templates as per the m ail from my names sake Rgds David Joyce The other one Sent from my iPhone > On 5 Jun 2016, at 09:05, davidjoyce@doctors.org.uk wrote: > > Vince, You can always do it the pre CAD way - cut your existing panel out w here you want the new removable section (with a thin saw), and use the cut o ut as yourpattern for the new panel. Make paper shapes of dimensions of inst ruments to go in and play around for best fit. It has worked well for me for three panel designs. > > Regards, David Joyce, GXSDJ > > > > >> On 2016-06-05 08:36, Rowland Carson wrote: >> m> >> >> On 2016-06-04, at 23:49, Groups wrote: >>> I have tried searching for a drawing of the sub panels but can not find o ne that has the dimensions. Does anyone have a usable drawing? >> Vince - I laid out my panels using CADintosh. That only runs on Mac, but i t can do DXF exports which should be readable by most other CAD applications . Let me know if you would like me to send you the DXF files for the main & r adio panels. >> >> in friendship >> >> Rowland >> >> | Rowland Carson ... that's Rowland with a 'w' ... >> | http://www.rowlandcarson.org.uk >> | Skype, Twitter: rowland_carson Facebook: Rowland Carson >> | pictures: http://picasaweb.google.com/rowlandcarson >> >> >> >> ttp://www.matronics.com/Navigator?Europa-List >> ics.com >> .com >> .matronics.com/contribution >> >> >> ________________________________ Message 5 _____________________________________ Time: 02:43:43 AM PST US From: "Vince (Groups Email)" Subject: RE: Europa-List: New panel Hi Rowland, The DXF files would be most welcome and also the CADintosh files as I do have a Mac I can use. Thanks Vince Goddard G-BWUP ULPower'ed Europa -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Rowland Carson Sent: 05 June 2016 08:36 Subject: Re: Europa-List: New panel --> On 2016-06-04, at 23:49, Groups wrote: > I have tried searching for a drawing of the sub panels but can not find one that has the dimensions. Does anyone have a usable drawing? Vince - I laid out my panels using CADintosh. That only runs on Mac, but it can do DXF exports which should be readable by most other CAD applications. Let me know if you would like me to send you the DXF files for the main & radio panels. in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson | pictures: http://picasaweb.google.com/rowlandcarson ________________________________ Message 6 _____________________________________ Time: 02:45:30 AM PST US From: "Vince (Groups Email)" Subject: RE: Europa-List: New panel Thanks for the kind offer David (the other one) but dumb question what=92s a scuttle? Thanks Vince Goddard G-BWUP ULPower'ed Europa From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-serv er@matronics.com] On Behalf Of David private Sent: 05 June 2016 09:11 Subject: Re: Europa-List: New panel Vince I have a complete scuttle that was removed from my aircraft if you arrange collection you can have it to play around with and make templates as per th e mail from my names sake Rgds David Joyce The other one Sent from my iPhone On 5 Jun 2016, at 09:05, davidjoyce@doctors.org.uk wrote: Vince, You can always do it the pre CAD way - cut your existing panel out w here you want the new removable section (with a thin saw), and use the cut out as yourpattern for the new panel. Make paper shapes of dimensions of in struments to go in and play around for best fit. It has worked well for me for three panel designs. Regards, David Joyce, GXSDJ On 2016-06-05 08:36, Rowland Carson wrote: On 2016-06-04, at 23:49, Groups wrote: I have tried searching for a drawing of the sub panels but can not find one that has the dimensions. Does anyone have a usable drawing? Vince - I laid out my panels using CADintosh. That only runs on Mac, but it can do DXF exports which should be readable by most other CAD applications . Let me know if you would like me to send you the DXF files for the main & radio panels. in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson | pictures: http://picasaweb.google.com/rowlandcarson ttp://www.matronics.com/Navigator?Europa-List ics.com .com .matronics.com/contribution ________________________________ Message 7 _____________________________________ Time: 02:51:38 AM PST US From: "Vince (Groups Email)" Subject: RE: Europa-List: New panel Hi David, I was hoping to design and make the removable sections before taking the pa nel back out of the aircraft for the rework. If I can printout the sub pane ls full size then I will try the lick and stick method as it can be a quick er method initially when playing about. Will keep you all update on the pro gress. Thanks Vince Goddard G-BWUP ULPower'ed Europa From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-serv er@matronics.com] On Behalf Of davidjoyce@doctors.org.uk Sent: 05 June 2016 09:05 Subject: Re: Europa-List: New panel Vince, You can always do it the pre CAD way - cut your existing panel out w here you want the new removable section (with a thin saw), and use the cut out as yourpattern for the new panel. Make paper shapes of dimensions of in struments to go in and play around for best fit. It has worked well for me for three panel designs. Regards, David Joyce, GXSDJ On 2016-06-05 08:36, Rowland Carson wrote: On 2016-06-04, at 23:49, Groups wrote: I have tried searching for a drawing of the sub panels but can not find one that has the dimensions. Does anyone have a usable drawing? Vince - I laid out my panels using CADintosh. That only runs on Mac, but it can do DXF exports which should be readable by most other CAD applications . Let me know if you would like me to send you the DXF files for the main & radio panels. in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson | pictures: http://picasaweb.google.com/rowlandcarson ttp://www.matronics.com/Navigator?Europa-List ics.com .com .matronics.com/contribution ________________________________ Message 8 _____________________________________ Time: 03:21:35 AM PST US From: David private Subject: Re: Europa-List: New panel It's the whole unit I removed mine and replaced with a new one as it needed changing pic enclosed for you Rgds David Sent from my iPhone > On 5 Jun 2016, at 10:44, Vince (Groups Email) wro te: > > Thanks for the kind offer David (the other one) but dumb question what =99s a scuttle? > > > Thanks > > Vince Goddard > G-BWUP ULPower'ed Europa > > From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-ser ver@matronics.com] On Behalf Of David private > Sent: 05 June 2016 09:11 > To: europa-list@matronics.com > Subject: Re: Europa-List: New panel > > Vince > I have a complete scuttle that was removed from my aircraft if you arrange collection you can have it to play around with and make templates as per th e mail from my names sake > > Rgds > David Joyce > The other one > > Sent from my iPhone > > On 5 Jun 2016, at 09:05, davidjoyce@doctors.org.uk wrote: > > Vince, You can always do it the pre CAD way - cut your existing panel out w here you want the new removable section (with a thin saw), and use the cut o ut as yourpattern for the new panel. Make paper shapes of dimensions of inst ruments to go in and play around for best fit. It has worked well for me for three panel designs. > > Regards, David Joyce, GXSDJ > > > > > On 2016-06-05 08:36, Rowland Carson wrote: > > > > On 2016-06-04, at 23:49, Groups wrote: > I have tried searching for a drawing of the sub panels but can not find on e that has the dimensions. Does anyone have a usable drawing? > Vince - I laid out my panels using CADintosh. That only runs on Mac, but i t can do DXF exports which should be readable by most other CAD applications . Let me know if you would like me to send you the DXF files for the main & r adio panels. > > in friendship > > Rowland > > > > > ttp://www.matronics.com/Navigator?Europa-List > ics.com > .com > .matronics.com/contribution > > > ________________________________ Message 9 _____________________________________ Time: 10:27:31 AM PST US From: "Vince (Groups Email)" Subject: RE: Europa-List: New panel --- MIME Errors - No Plain-Text Section Found --- A message with no text/plain MIME section was received. The entire body of the message was removed. Please resend the email using Plain Text formatting. HOTMAIL is notorious for only including an HTML section in their client's default configuration. If you're using HOTMAIL, please see your email application's settings and switch to a default mail option that uses "Plain Text". --- MIME Errors No Plain-Text Section Found --- ________________________________ Message 10 ____________________________________ Time: 10:28:12 AM PST US From: "Vince (Groups Email)" Subject: RE: Europa-List: New panel Hi David, When you=92ve changed your panel layouts what was involved re the LAA? Thanks Vince Goddard G-BWUP ULPower'ed Europa From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-serv er@matronics.com] On Behalf Of davidjoyce@doctors.org.uk Sent: 05 June 2016 09:05 Subject: Re: Europa-List: New panel Vince, You can always do it the pre CAD way - cut your existing panel out w here you want the new removable section (with a thin saw), and use the cut out as yourpattern for the new panel. Make paper shapes of dimensions of in struments to go in and play around for best fit. It has worked well for me for three panel designs. Regards, David Joyce, GXSDJ On 2016-06-05 08:36, Rowland Carson wrote: On 2016-06-04, at 23:49, Groups wrote: I have tried searching for a drawing of the sub panels but can not find one that has the dimensions. Does anyone have a usable drawing? Vince - I laid out my panels using CADintosh. That only runs on Mac, but it can do DXF exports which should be readable by most other CAD applications . Let me know if you would like me to send you the DXF files for the main & radio panels. in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson | pictures: http://picasaweb.google.com/rowlandcarson ttp://www.matronics.com/Navigator?Europa-List ics.com .com .matronics.com/contribution ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.