Today's Message Index:
----------------------
1. 07:50 AM - Re: mylar decorative trim (Fred Klein)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: mylar decorative trim |
> On Jul 17, 2016, at 2:04 PM, Greg Fuchs <gregoryf.flyboy@comcast.net>
wrote:
>
> If non-conductive metallic-looking Mylar or vinyl is not available,
you
> could just try it. Just like there is metal in your airplane not far
from
> the antenna, you could probably get away with small accent strips as
well.
> Best if they are smaller and broken up, and not one long continuous
piece.
> Besides, they could always be removed, right? :)
Gregsince we=99re doing =9Cexperimental aviation
=9D I can certainly do just that in this regard.
I was looking at short strips along the sides of the rudder at right
angles to the vertical antennaand(of course) some
longer strips along the sides of the fuselageI=99ll be
checking out the COM before and after and share results
F.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|