----------------------------------------------------------
                           Europa-List Digest Archive
                                      ---
                     Total Messages Posted Fri 11/04/16: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 01:53 PM - Engine rubber mounts  (Remi Guerner)
     2. 03:13 PM - Re: Engine rubber mounts  (David Watts)
 
 
 
________________________________  Message 1  _____________________________________


Time: 01:53:17 PM PST US
Subject: Europa-List: Engine rubber mounts
From: "Remi Guerner" <air.guerner@orange.fr>


Hello all,
I replaced the MT4 rubber mounts on my XS Monowheel last January. Now I see that
the engine is sagging (2 degree pitch down measured at the propeller flange).
This clearly comes from the new rubber mounts (purchased from Europa) which
are softer than the originals (supplied with the kit back in 1999) .  Has anyone
experienced a similar problem? Is anyone aware of a modification regarding
the characteristics and/or installation of the rubber mounts between 1999 and
now ?

Remi Guerner


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=462009#462009


________________________________  Message 2  _____________________________________


Time: 03:13:59 PM PST US
Subject: Re: Europa-List: Engine rubber mounts
From: David Watts <dg.watts@talktalk.net>


Hi Remi,

I replaced the rubber mounts on my Classic Mono in May after 2,200 hours and have
now put 100 hours on these new rubbers and I am pleased to say that there is
no sagging evident at all so far.

Incidentally, I used new rubber mounts bought from Europa a few weeks before.

Dave Watts
G-BXDY

> On 4 Nov 2016, at 20:52, Remi Guerner <air.guerner@orange.fr> wrote:
> 
> 
> Hello all,
> I replaced the MT4 rubber mounts on my XS Monowheel last January. Now I see that
the engine is sagging (2 degree pitch down measured at the propeller flange).
This clearly comes from the new rubber mounts (purchased from Europa) which
are softer than the originals (supplied with the kit back in 1999) .  Has anyone
experienced a similar problem? Is anyone aware of a modification regarding
the characteristics and/or installation of the rubber mounts between 1999 and
now ?
> 
> Remi Guerner
> 
> 
> 
> 
> Read this topic online here:
> 
> http://forums.matronics.com/viewtopic.php?p=462009#462009
> 
> 
> 
> 
> 
> 
> 
> 
> 


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               europa-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Europa-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/europa-list
Browse Digests                   http://www.matronics.com/digest/europa-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.