Europa-List Digest Archive

Mon 12/19/16


Total Messages Posted: 2



Today's Message Index:
----------------------
 
     1. 03:57 AM - Re: Re: Door Hinge (ami-mcfadyean@talktalk.net)
     2. 01:22 PM - Re: Door Hinge (Clive Sutton)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:57:02 AM PST US
    From: "ami-mcfadyean@talktalk.net" <ami-mcfadyean@talktalk.net>
    Subject: Re: Door Hinge
    Clive, Care to share the critical dimensions? i.e. the centre-to-centre distances between the three pivots; assuming the standard shorter plastic ball ends have been used? Rgds., Duncan McF. ----Original Message---- From: clive.maf@googlemail.com Subj: Europa-List: Re: Door Hinge Gents, in case its useful a pic of the gas strut mechanism installed on kit 121 (which i now own and is registered as G-YETI). I am also in receipt of recent correspondence from Andy Draper who accepts this as 'Trivial' on the basis that the function of the strut is unchanged by this MOD. Regards, Clive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=464158#464158 Attachments: http://forums.matronics.com//files/my_version_teds_door_stay_on_table_003_991.jpg


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:22:50 PM PST US
    Subject: Re: Door Hinge
    From: "Clive Sutton" <clive.maf@googlemail.com>
    Duncan, certainly: Centres between upper/door attachment end and hinge is 240mm Centres between lower/fuselage arm attachment end and hinge is 227mm Lower arm attachment and the rod end of the gas strut share the same location Other/thicker end of the gas strut is placed 38mm from the hinge centre on the door arm Do bear in mind that the strut mechanisms are 'handed' per side Actually (and complete credit should go to Gerry for this) i have a pattern/mockup mechanism as image below. If the Europa Club would like to put it on their 'inventory' of useful stuff/tools, i would be happy to donate it. In the first instance though i will be posting it to Roger Lloyd - who go there first! Hope it helps Clive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=464192#464192




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --