---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Mon 12/19/16: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:57 AM - Re: Re: Door Hinge (ami-mcfadyean@talktalk.net) 2. 01:22 PM - Re: Door Hinge (Clive Sutton) ________________________________ Message 1 _____________________________________ Time: 03:57:02 AM PST US From: "ami-mcfadyean@talktalk.net" Subject: Re: Europa-List: Re: Door Hinge Clive, Care to share the critical dimensions? i.e. the centre-to-centre distances between the three pivots; assuming the standard shorter plastic ball ends have been used? Rgds., Duncan McF. ----Original Message---- From: clive.maf@googlemail.com Subj: Europa-List: Re: Door Hinge Gents, in case its useful a pic of the gas strut mechanism installed on kit 121 (which i now own and is registered as G-YETI). I am also in receipt of recent correspondence from Andy Draper who accepts this as 'Trivial' on the basis that the function of the strut is unchanged by this MOD. Regards, Clive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=464158#464158 Attachments: http://forums.matronics.com//files/my_version_teds_door_stay_on_table_003_991.jpg ________________________________ Message 2 _____________________________________ Time: 01:22:50 PM PST US Subject: Europa-List: Re: Door Hinge From: "Clive Sutton" Duncan, certainly: Centres between upper/door attachment end and hinge is 240mm Centres between lower/fuselage arm attachment end and hinge is 227mm Lower arm attachment and the rod end of the gas strut share the same location Other/thicker end of the gas strut is placed 38mm from the hinge centre on the door arm Do bear in mind that the strut mechanisms are 'handed' per side Actually (and complete credit should go to Gerry for this) i have a pattern/mockup mechanism as image below. If the Europa Club would like to put it on their 'inventory' of useful stuff/tools, i would be happy to donate it. In the first instance though i will be posting it to Roger Lloyd - who go there first! Hope it helps Clive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=464192#464192 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.