Today's Message Index:
----------------------
1. 04:47 AM - Plexi delamination. (William Daniell)
2. 08:11 AM - Re: Plexi delamination. (SPURPURA)
3. 10:16 AM - Europa XS 2005 for sale (Dean)
4. 12:10 PM - Re: Door Hinge ()
5. 12:14 PM - Re: Door Hinge ()
6. 12:17 PM - Re: Door Hinge ()
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Plexi delamination. |
I have a good bond everywhere except an are about 1.5 inches long but about
1/2 inch which is to say that I have 1.5 inches with just 1/4 inch of
bond. This is on the forward edge of the door plexi.
I tried drilling and injecting from the back but it appears it's not a void
but a de-lamination and the glue wont flow in.
So what I was thinking it to do a 2 ply lay up over the joint between the
door and the forward edge of the plexi ith araldite forming the the bond
between the bid and the plexi. Does anyone have a comment on this?
Thanks
Will
HJ 460
PS started the engine/airmaster over the weekend with the Dynon connected
everything works! And my 14 year project has a name "HJ 460" and I have a
trailer.
William Daniell
LONGPORT
+57 310 295 0744
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Plexi delamination. |
I would not worry about it,sounds like a small anomaly.If it becomes a problem
later then you can repair it.
--------
N951EU - Tri-gear & 912ULS
I'D RATHER HAVE A BOTTLE IN FRONT OF ME THAN A FRONTAL LABOTAMY.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=464249#464249
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Europa XS 2005 for sale |
I'd like to inform all that N284A Europa XS 2005 is for sale.
When built there was over $95,000 in the build.
Basic list of features
914 rotax turbocharged
700 hours
Airmaster constant speed prop
Panel was just rehabed with removable panels
Electric flaps, electric elev trim and electric aileron trim
Flap, elev and aileron trim indicators
Dynon D10A Efis with two autopilot servos
autopilot has bluetooth for gps (currently using with andriod tablet with
avare software
Backup altimeter, altitude, airspeed and vert speed round instraments
All UMA engine instruments
Intercom
Bendix/king KX125 Comm/VOR
Garmin GTX 327 transponder
125 knot cruise on 5.5 ghp autogas
Repainted in 2010
Asking $45,000 US Reasonable offers considered
Email daseitz@cfl.rr.com for pictures and additional information
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Number two =93 The stay open on dining room table.
From: Brian Davies
Sent: Saturday, December 17, 2016 1:47 PM
Subject: Europa-List: Door Hinge
Many moons ago someone posted a door strut mechanism that removed all
of the spring strut force from the door when it was closed. Does anyone
have a link or drawing of the design?
Regards
Brian Davies
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Number three Door stay installed. Please note the tight fit. My notes
will explain.
From: Brian Davies
Sent: Saturday, December 17, 2016 1:47 PM
Subject: Europa-List: Door Hinge
Many moons ago someone posted a door strut mechanism that removed all
of the spring strut force from the door when it was closed. Does anyone
have a link or drawing of the design?
Regards
Brian Davies
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Number four. Installed and connected to a open door. ( I see that the
door was not fully open in this shot =93 the one behind is fully
open. It is important to get the stops on the stay middle pivot just
right so that the gas strut does not foul the lower half of the stay.
From: Brian Davies
Sent: Saturday, December 17, 2016 1:47 PM
Subject: Europa-List: Door Hinge
Many moons ago someone posted a door strut mechanism that removed all
of the spring strut force from the door when it was closed. Does anyone
have a link or drawing of the design?
Regards
Brian Davies
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|