---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 12/22/16: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:47 AM - Plexi delamination. (William Daniell) 2. 08:11 AM - Re: Plexi delamination. (SPURPURA) 3. 10:16 AM - Europa XS 2005 for sale (Dean) 4. 12:10 PM - Re: Door Hinge () 5. 12:14 PM - Re: Door Hinge () 6. 12:17 PM - Re: Door Hinge () ________________________________ Message 1 _____________________________________ Time: 04:47:01 AM PST US From: William Daniell Subject: Europa-List: Plexi delamination. I have a good bond everywhere except an are about 1.5 inches long but about 1/2 inch which is to say that I have 1.5 inches with just 1/4 inch of bond. This is on the forward edge of the door plexi. I tried drilling and injecting from the back but it appears it's not a void but a de-lamination and the glue wont flow in. So what I was thinking it to do a 2 ply lay up over the joint between the door and the forward edge of the plexi ith araldite forming the the bond between the bid and the plexi. Does anyone have a comment on this? Thanks Will HJ 460 PS started the engine/airmaster over the weekend with the Dynon connected everything works! And my 14 year project has a name "HJ 460" and I have a trailer. William Daniell LONGPORT +57 310 295 0744 ________________________________ Message 2 _____________________________________ Time: 08:11:32 AM PST US Subject: Europa-List: Re: Plexi delamination. From: "SPURPURA" I would not worry about it,sounds like a small anomaly.If it becomes a problem later then you can repair it. -------- N951EU - Tri-gear & 912ULS I'D RATHER HAVE A BOTTLE IN FRONT OF ME THAN A FRONTAL LABOTAMY. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=464249#464249 ________________________________ Message 3 _____________________________________ Time: 10:16:13 AM PST US From: "Dean" Subject: Europa-List: Europa XS 2005 for sale I'd like to inform all that N284A Europa XS 2005 is for sale. When built there was over $95,000 in the build. Basic list of features 914 rotax turbocharged 700 hours Airmaster constant speed prop Panel was just rehabed with removable panels Electric flaps, electric elev trim and electric aileron trim Flap, elev and aileron trim indicators Dynon D10A Efis with two autopilot servos autopilot has bluetooth for gps (currently using with andriod tablet with avare software Backup altimeter, altitude, airspeed and vert speed round instraments All UMA engine instruments Intercom Bendix/king KX125 Comm/VOR Garmin GTX 327 transponder 125 knot cruise on 5.5 ghp autogas Repainted in 2010 Asking $45,000 US Reasonable offers considered Email daseitz@cfl.rr.com for pictures and additional information ________________________________ Message 4 _____________________________________ Time: 12:10:33 PM PST US From: Subject: Re: Europa-List: Door Hinge Number two =93 The stay open on dining room table. From: Brian Davies Sent: Saturday, December 17, 2016 1:47 PM Subject: Europa-List: Door Hinge Many moons ago someone posted a door strut mechanism that removed all of the spring strut force from the door when it was closed. Does anyone have a link or drawing of the design? Regards Brian Davies ________________________________ Message 5 _____________________________________ Time: 12:14:01 PM PST US From: Subject: Re: Europa-List: Door Hinge Number three Door stay installed. Please note the tight fit. My notes will explain. From: Brian Davies Sent: Saturday, December 17, 2016 1:47 PM Subject: Europa-List: Door Hinge Many moons ago someone posted a door strut mechanism that removed all of the spring strut force from the door when it was closed. Does anyone have a link or drawing of the design? Regards Brian Davies ________________________________ Message 6 _____________________________________ Time: 12:17:23 PM PST US From: Subject: Re: Europa-List: Door Hinge Number four. Installed and connected to a open door. ( I see that the door was not fully open in this shot =93 the one behind is fully open. It is important to get the stops on the stay middle pivot just right so that the gas strut does not foul the lower half of the stay. From: Brian Davies Sent: Saturday, December 17, 2016 1:47 PM Subject: Europa-List: Door Hinge Many moons ago someone posted a door strut mechanism that removed all of the spring strut force from the door when it was closed. Does anyone have a link or drawing of the design? Regards Brian Davies ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.