---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Wed 01/11/17: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:01 AM - Re: Trips 2017 UK/Europe (Roland) 2. 01:27 AM - Fw: Re: CAMLOC Fasteners (jglazener) 3. 03:45 AM - Re: Fw: Re: CAMLOC Fasteners (Raimo Toivio) 4. 11:41 AM - Fw: Re: CAMLOC Fasteners (jglazener) ________________________________ Message 1 _____________________________________ Time: 01:01:40 AM PST US Subject: Europa-List: Re: Trips 2017 UK/Europe From: "Roland" Hi David and all, after reply from Jens I'm pleased to let you know, that all Europa-pilots are very welcome at the OUV-summer meeting, which will take place at Bad Drkheim EDRF from 16th-18th June 2017 Mogas is available at EDRF and no landing fees will be charged on arrival. More details will follow (accomodation/camping, restaurants, daytrips....). So please save the date by now! And David, please advertise also for the club-members. Regards Roland PH-ZTI XS TG 914 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=464966#464966 ________________________________ Message 2 _____________________________________ Time: 01:27:16 AM PST US Subject: Europa-List: Fwd: Re: CAMLOC Fasteners From: "jglazener" Hello Raimo, I followed your suggestion and contacted MilSpec. I got the following reply: ""I would recommend using the 4000 series C-Spec fasteners for this application. The 2000 series are generally not robust enough for a main cowling application. The easiest way to do this would be to use our pre-engineered fastener sets found here http://milspecproducts.com/heavy_duty_4000_series". I understand from your post that you used the 2000 series. The 4000 series are a bit more expensive but not ridiculously so, which suggests they are not just after more money. They do however seem a lot bigger which raises weight issues. What is your idea- is the 2000 adequate in your experience or would it be worthwhile getting the 4000? BTW I like your analogy of a cowling without access hatches with a beautiful woman. I happen to be rather partial to beautiful women as well as aircraft, and any idea that keeps them both shut up is welcome ;-) Thanks, -------- Jeroen http://www.europaowners.org/main.php?g2_itemId=44165 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=464967#464967 ________________________________ Message 3 _____________________________________ Time: 03:45:30 AM PST US Subject: Re: Europa-List: Fwd: Re: CAMLOC Fasteners From: Raimo Toivio Jeroen, great! I try to find some time and visit my Europa archives. I am pretty sure I can find what I purchased from them and report to you. All I remember there were many sizes, say at least 5. Thats because the variance of the thickness of the lower surface. I bought quite a lot extras to get exatly the sizes I wanted. I am not sure was it 2000 or 4000 serie, but soon I know. How about that? About women & acs: isnt that so, that we would like to get the full authority to control when they are shut up, speaking quietly or even screeching at full passion, whenever and where ever we happen to want? Pls say something that I know you have got this. I usually cannot see my postings on the Europa-list (???). So, I send them blind. Cheers, Raimo Europa #417 Finland allekirjoitus 11.1.2017, 11:26, jglazener kirjoitti: > > Hello Raimo, I followed your suggestion and contacted MilSpec. I got the following reply: ""I would recommend using the 4000 series C-Spec fasteners for this application. The 2000 series are generally not robust enough for a main cowling application. The easiest way to do this would be to use our pre-engineered fastener sets found here http://milspecproducts.com/heavy_duty_4000_series". > > I understand from your post that you used the 2000 series. The 4000 series are a bit more expensive but not ridiculously so, which suggests they are not just after more money. They do however seem a lot bigger which raises weight issues. What is your idea- is the 2000 adequate in your experience or would it be worthwhile getting the 4000? > > BTW I like your analogy of a cowling without access hatches with a beautiful woman. I happen to be rather partial to beautiful women as well as aircraft, and any idea that keeps them both shut up is welcome ;-) > > Thanks, > > -------- > Jeroen > > http://www.europaowners.org/main.php?g2_itemId=44165 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=464967#464967 > > ________________________________ Message 4 _____________________________________ Time: 11:41:06 AM PST US Subject: Europa-List: Fwd: Re: CAMLOC Fasteners From: "jglazener" Received and noted! If you want we can discuss this further offline: j.glazener14@gmail.com -------- Jeroen http://www.europaowners.org/main.php?g2_itemId=44165 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=464990#464990 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.