---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 01/22/17: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:48 AM - Re: Resin expert? (GRAHAM SINGLETON) 2. 06:07 AM - Re: Copy of Mod 13070 Classic Aluminium fule filler needed. (h&jeuropa) 3. 08:06 AM - Re: Re: Copy of Mod 13070 Classic Aluminium fule filler needed. (Pete Lawless) 4. 11:27 AM - Re: LAA Night / IFR Trials (carlp101) 5. 12:12 PM - Re: LAA Night / IFR Trials (graeme bird) 6. 12:14 PM - Re: Re: LAA Night / IFR Trials (Alan Burrill) 7. 03:51 PM - Re: LAA Night / IFR Trials (carlp101) ________________________________ Message 1 _____________________________________ Time: 02:48:27 AM PST US From: GRAHAM SINGLETON Subject: Re: Europa-List: Resin expert? Graemeyou might like to talk to Easy Composites, +44 (0)1782 454499,not app roved by LAA but I'm using their resin and CF braided tube for my trike fra me. The do supply casting resin. Graham On Saturday, 21 January 2017, 20:32, graeme bird w rote: I need help finding a resin that is clear, thermally conductive and hard an d that I can make a mould for and buy in small quantities. It's for potting the latest high intensity LEDs for combined strobe rear/na v lights. Any expertise appreciated, I have done strobe circuits etc,=C2- but reall y I can't know everything :-). -------- Graeme Bird G-UMPY -=C2- Mono Classic/XS FFW 912S, Woodcomp 3000/3W CS, trutrak Gemin i 2 axis ap, pflarm, ads-b out, 8.33khz, mode S, FP 5, Aera500 & SD on Nexus, 250 hours & 4 years on the Mono, 880 total g(at)gdbmk.co.uk Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465315#465315 S - WIKI - - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin. ________________________________ Message 2 _____________________________________ Time: 06:07:31 AM PST US Subject: Europa-List: Re: Copy of Mod 13070 Classic Aluminium fule filler needed. From: "h&jeuropa" Pete, You really should be a member for the reasons Brian listed. However, there is no log in required on the club website and no members only section, so you can get the mod like Bob Borger mentioned. The club is in the process of revising the website so that some items will be only accessible to members, so you may want to download it soon. Jim Butcher Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465329#465329 ________________________________ Message 3 _____________________________________ Time: 08:06:15 AM PST US Subject: Re: Europa-List: Re: Copy of Mod 13070 Classic Aluminium fule filler needed. From: Pete Lawless Thanks Jim. Some one already sent me a copy. Regards Pete On 22/01/17 14:07, h&jeuropa wrote: > > Pete, > > You really should be a member for the reasons Brian listed. > > However, there is no log in required on the club website and no members only section, so you can get the mod like Bob Borger mentioned. > > The club is in the process of revising the website so that some items will be only accessible to members, so you may want to download it soon. > > Jim Butcher > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=465329#465329 > > ________________________________ Message 4 _____________________________________ Time: 11:27:11 AM PST US Subject: Europa-List: Re: LAA Night / IFR Trials From: "carlp101" Hi Graeme, Steven, I'm in the process of getting my Europa Tri-Gear ready for IMC/Night approval. I've done a lot of work replacing all my avionics with a SkyView D1000T panel, 8.33 radio, transponder, 2 channel auto pilot, landing light, position lights, cabin lights and a backup artificial horizon (I went for a GRT Mini-X because it has a terrain and obstacle database. Essential as a backup instrument for IMC/Night if you ask me). I've also plumbed my Pilot Aware unit into the SkyView system so I get traffic too. It works a treat. I just need to replace my Pitot probe with a heated version now and I was looking at the Dynon. I need to find out what the current draw is to see if I'm going to need to fit an additional alternator. I'm talking with Peter Pengelli, one of the guys that's been involved in getting the LAA IMC/Night approval through. I'm waiting on a test pilot to fly it and see if he gives the thumbs-up so I can go on to the next step. Then it's down to an assessment of the kits I have fitted and whether I need to make changes (God, I hope not), additions, etc. Hopefully you can see a picture attached of the new panels fitted. If not, email me directly and I'll send you some pictures. All the best. Carl cparkinson@cisc-uk.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465337#465337 Attachments: http://forums.matronics.com//files/new_panels_fitted_190.jpg ________________________________ Message 5 _____________________________________ Time: 12:12:02 PM PST US Subject: Europa-List: Re: LAA Night / IFR Trials From: "graeme bird" wow, that looks and sounds great. I put my info into the LAA but then was asked to submit a MOD15 form. I have my annual at the moment so am rearranging my instruments to comply plus adding wires for lights and pitot heat. I have a pitot heat design in progress based on the europa standard one and recon on needing about 1-2 max keeping thermal insulation up and thermal mass down. It sounds like you are already well on the way and will be the first of class/type and it may be sensible that that is a tri-gear. Rick Moss is also pursuing it his Europa with a conventional six pack fit out. Mine is a mix of steam, dedicated gauges and portable and installed electronics not nearly as clean as your panel. Somehow I need to link up to the assessment team. Where are you based? -------- Graeme Bird G-UMPY - Mono Classic/XS FFW 912S, Woodcomp 3000/3W CS, trutrak Gemini 2 axis ap, pflarm, ads-b out, 8.33khz, mode S, FP 5, Aera500 & SD on Nexus, 250 hours & 4 years on the Mono, 880 total g(at)gdbmk.co.uk Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465338#465338 ________________________________ Message 6 _____________________________________ Time: 12:14:51 PM PST US From: Alan Burrill Subject: Re: Europa-List: Re: LAA Night / IFR Trials Carl, The link just goes to an error 404 and not found. I would love to see them please as I am currently designing a panel. I'm favouring conventional instruments with some electronics I.e. HSI. Perhaps the Europa Club would consider hosting the pictures with a write up on progress on making this happen do you happen to be a member? Kind regards Alan Burrill GOBJT Sent from my iPad > On 22 Jan 2017, at 19:26, carlp101 wrote: > > > Hi Graeme, Steven, > > I'm in the process of getting my Europa Tri-Gear ready for IMC/Night approval. I've done a lot of work replacing all my avionics with a SkyView D1000T panel, 8.33 radio, transponder, 2 channel auto pilot, landing light, position lights, cabin lights and a backup artificial horizon (I went for a GRT Mini-X because it has a terrain and obstacle database. Essential as a backup instrument for IMC/Night if you ask me). I've also plumbed my Pilot Aware unit into the SkyView system so I get traffic too. It works a treat. I just need to replace my Pitot probe with a heated version now and I was looking at the Dynon. I need to find out what the current draw is to see if I'm going to need to fit an additional alternator. > > I'm talking with Peter Pengelli, one of the guys that's been involved in getting the LAA IMC/Night approval through. I'm waiting on a test pilot to fly it and see if he gives the thumbs-up so I can go on to the next step. Then it's down to an assessment of the kits I have fitted and whether I need to make changes (God, I hope not), additions, etc. > > Hopefully you can see a picture attached of the new panels fitted. If not, email me directly and I'll send you some pictures. > > All the best. > Carl > cparkinson@cisc-uk.com > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=465337#465337 > > > > > Attachments: > > http://forums.matronics.com//files/new_panels_fitted_190.jpg > > > > > > ________________________________ Message 7 _____________________________________ Time: 03:51:35 PM PST US Subject: Europa-List: Re: LAA Night / IFR Trials From: "carlp101" Andy, I deleted the original picture because it was physically too large. You may have clicked on the link when I was in the process of changing it over. It seems to be displaying OK now. Graeme, I'm based at Membury. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465352#465352 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.