Today's Message Index:
----------------------
1. 01:01 AM - Re: Position and mounting of EDC-D10A remote compass (John Wighton)
2. 01:08 AM - Re: Position and mounting of EDC-D10A remote compass (John Wighton)
3. 01:56 PM - TRIG TY96 and SmartASS 3 (Remi Guerner)
4. 02:36 PM - Re: TRIG TY96 and SmartASS 3 (Pete)
5. 02:45 PM - Re: TRIG TY96 and SmartASS 3 (David Watts)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Position and mounting of EDC-D10A remote compass |
Umm, no sure if l or others have got this wrong. The D10A remote compass is a
'black box' not a card compass. Mine is under the baggage area on the RH side
on a custom made plinth.
Unfortunately touring with metal in this area tends to give magnetic variation
so its not the best place. Fuel cans, folding chairs and such like do have an
effect.
Apart from the above issue, the location proves acceptable and is easy to maintain.
JW
--------
John Wighton
Europa XS trigear G-IPOD
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=466694#466694
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Position and mounting of EDC-D10A remote compass |
Attached picture of the installation.
--------
John Wighton
Europa XS trigear G-IPOD
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=466695#466695
Attachments:
http://forums.matronics.com//files/img_2195_727.jpg
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | TRIG TY96 and SmartASS 3 |
Hello all,
I have just installed a new TY96 radio and a SmartASS 3 on my aircraft and I have
the following problem: the voice from the SmartASS is so weak that it is barely
audible. That is with the SmartAss potentiometer set to the maximum volume
and the "AUX" input of the radio configured for max volume. Of course I am
talking to TRIG and to Mark Burton to try to sort this out. I have checked my
wiring at least a dozen times and did not find anything wrong.
Is there anyone who has installed a TY96 and SmartASS 3 ?
Regards
Remi Guerner
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=466721#466721
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: TRIG TY96 and SmartASS 3 |
Yip, I have both, with no issues. In fact I am even running the S.A. Through a
10k resistor as I'm combining with the output from a Zion MRX PCAS (beeps) into
the trig's aux in.
Your troubles seem odd for sure.
Cheers,
Pete
A239 soon to get into formation.
> On Feb 27, 2017, at 4:56 PM, Remi Guerner <air.guerner@orange.fr> wrote:
>
>
> Hello all,
> I have just installed a new TY96 radio and a SmartASS 3 on my aircraft and I
have the following problem: the voice from the SmartASS is so weak that it is
barely audible. That is with the SmartAss potentiometer set to the maximum volume
and the "AUX" input of the radio configured for max volume. Of course I am
talking to TRIG and to Mark Burton to try to sort this out. I have checked my
wiring at least a dozen times and did not find anything wrong.
> Is there anyone who has installed a TY96 and SmartASS 3 ?
> Regards
> Remi Guerner
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=466721#466721
>
>
>
>
>
>
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: TRIG TY96 and SmartASS 3 |
Hi Remi,
I have this configuration in my aircraft plus I also feed the output from my iPad/SkyDemon
in to the "AUX" as well and everything comes through loud and clear
with the AUX volume set at 3/4, the main Trig volume knob set at about 1/3 and
the SmartASS volume at about 3/4.
Dave Watts
G-BXDY Classic Mono
> On 27 Feb 2017, at 21:56, Remi Guerner <air.guerner@orange.fr> wrote:
>
>
> Hello all,
> I have just installed a new TY96 radio and a SmartASS 3 on my aircraft and I
have the following problem: the voice from the SmartASS is so weak that it is
barely audible. That is with the SmartAss potentiometer set to the maximum volume
and the "AUX" input of the radio configured for max volume. Of course I am
talking to TRIG and to Mark Burton to try to sort this out. I have checked my
wiring at least a dozen times and did not find anything wrong.
> Is there anyone who has installed a TY96 and SmartASS 3 ?
> Regards
> Remi Guerner
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=466721#466721
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|