Today's Message Index:
----------------------
1. 01:12 AM - Re: High top - angle of incidence (Brian Davies)
2. 01:34 AM - Re: High top - angle of incidence (Brian Davies)
3. 05:05 AM - Re: High top - angle of incidence (AirEupora)
4. 07:55 AM - Database of parts (Paul Mansfield)
5. 08:39 AM - Re: Database of parts (Sky)
6. 11:07 AM - Trip report link with Pics uk Goodwood/Billy trail (graeme bird)
7. 12:33 PM - Re: High top - angle of incidence (jonathanmilbank)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | High top - angle of incidence |
Phil,
>From memory the port door recess is the reference plane so no dismantling
required. See Chapter 27 Step 1 of the builders manual.
Brian G-DDBD
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Phil B
Sent: 11 April 2017 19:27
Subject: Europa-List: High top - angle of incidence
I bought a part completed Europa Classic high top some years ago and am now
in the pre flight inspection stage. My inspector wants to check the angle of
incidence of the wings but as the plane is painted and internally completed
I have no reference plane to check the angle of incidence against. Don't
really want to remove the upholstery or paint (but will do as a last resort)
and therefore any suggestions on how to check the angle of incidence would
be appreciated. Thanks in advance.
--------
Phil B
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=468309#468309
---
This email has been checked for viruses by AVG.
http://www.avg.com
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | High top - angle of incidence |
OOPS, missed the point about the high top! Yes, I see your problem.
Brian
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Brian Davies
Sent: 12 April 2017 09:12
Subject: RE: Europa-List: High top - angle of incidence
--> <brian.davies@clara.co.uk>
Phil,
>From memory the port door recess is the reference plane so no
>dismantling
required. See Chapter 27 Step 1 of the builders manual.
Brian G-DDBD
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Phil B
Sent: 11 April 2017 19:27
Subject: Europa-List: High top - angle of incidence
I bought a part completed Europa Classic high top some years ago and am now
in the pre flight inspection stage. My inspector wants to check the angle of
incidence of the wings but as the plane is painted and internally completed
I have no reference plane to check the angle of incidence against. Don't
really want to remove the upholstery or paint (but will do as a last resort)
and therefore any suggestions on how to check the angle of incidence would
be appreciated. Thanks in advance.
--------
Phil B
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=468309#468309
---
This email has been checked for viruses by AVG.
http://www.avg.com
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: High top - angle of incidence |
I too have the high top. The only place that will work is the top of the fuel
tank between the two head rest. You will need the Template or make it. Then
read and Chapter 27.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=468327#468327
Attachments:
http://forums.matronics.com//files/wings__25_degrees_153.jpg
http://forums.matronics.com//files/right_wings__25_degrees_413.jpg
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Database of parts |
I wonder if the kind soul with the "amazing database with lots of details on the
parts (including where they are referenced in each of the manuals)" would be
prepared to share it with me?
I have a couple of items I can't trace despite a word search of the PDF manuals,
this might help.
Many thanks in advance,
Paul M
383 XS Mono 912S
-----Original Message-----
From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of n7188u
Sent: 11 April 2017 21:08
Subject: Europa-List: Re: New Europa Builder
Thanks to all for the replies and good wishes. I got an extensive scanned BOM and
an amazing database with lots of details on the parts (including where they
are referenced in each of the manuals) from two forum members. Thanks to all
that offered and I'll let you know if I need more info.
Jim and Heather, I appreciate the generous offer. I checked the Blackwater airport
and its grass. The reason I am getting the Europa is because the LongEZ is
not a friend of grass fields! I will check, maybe there is a hard surface airport
close by and I can then get a ride to Blackwater. Will let you know.
Regards,
Chris
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=468313#468313
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Database of parts |
Likewise, it would be a great resource either posted on this forum and/or on the
Europa Club website.
Richard CC
M614 XS Mono
Sent from my iPhone
> On 12 Apr 2017, at 15:54, Paul Mansfield <europaul383@hotmail.com> wrote:
>
>
> I wonder if the kind soul with the "amazing database with lots of details on
the parts (including where they are referenced in each of the manuals)" would
be prepared to share it with me?
>
> I have a couple of items I can't trace despite a word search of the PDF manuals,
this might help.
>
> Many thanks in advance,
>
> Paul M
> 383 XS Mono 912S
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of n7188u
> Sent: 11 April 2017 21:08
> To: europa-list@matronics.com
> Subject: Europa-List: Re: New Europa Builder
>
>
> Thanks to all for the replies and good wishes. I got an extensive scanned BOM
and an amazing database with lots of details on the parts (including where they
are referenced in each of the manuals) from two forum members. Thanks to all
that offered and I'll let you know if I need more info.
>
> Jim and Heather, I appreciate the generous offer. I checked the Blackwater airport
and its grass. The reason I am getting the Europa is because the LongEZ
is not a friend of grass fields! I will check, maybe there is a hard surface airport
close by and I can then get a ride to Blackwater. Will let you know.
>
> Regards,
> Chris
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=468313#468313
>
>
>
>
>
>
>
>
>
>
>
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Trip report link with Pics uk Goodwood/Billy trail |
https://forums.flyer.co.uk/viewtopic.php?f=67&t=103737
another fly cycle
--------
Graeme Bird
G-UMPY - Mono Classic/XS FFW 912S, Woodcomp 3000/3W CS, trutrak Gemini 2 axis
ap, pflarm, ads-b out, 8.33khz, mode S, FP-5, Aera500 & SD on Nexus,
280 hours & 5 years on the Mono, 900 total
g(at)gdbmk.co.uk
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=468337#468337
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: High top - angle of incidence |
Phil,
How about getting a couple of builders without Hi-Top to check how closely their
flat areas between the headrests compare with their left door sills for an alternative
reference? I have thin upholstery glued on mine, so the result should
be much the same as measuring on the bare surface.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=468343#468343
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|