Today's Message Index:
----------------------
1. 04:08 PM - Re: High top - angle of incidence (h&jeuropa)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: High top - angle of incidence |
Phil,
Wing incidence is set 2.5 deg relative to the port door recess for the standard
build.
Using dimensions from the build manual and Mod 64, Hi Top, the piece that is inserted
extends from the firewall (station 30) to station 155, so it is 125 inches
long. At the front it raises up 2.75 inches. That calculates to be 1.25 deg.
So if you measure incidence relative to the door recess on your high top
it should measure 2.5 + 1.25 or 3.75 deg.
I think this is likely more exact than using the fuel tank top since that is dependent
on how the cockpit module was installed and fits in the fuselage bottom.
Jim Butcher
N241BW not a high top
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=468373#468373
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|