Today's Message Index:
----------------------
1. 12:58 AM - Bolt through OR 5 slot (Phil B)
2. 05:11 AM - Re: Bolt through OR 5 slot (Nigel Graham)
3. 06:49 AM - Re: Europa fly-in Bad =?ISO-8859-1?Q?D=C3=BCrkheim?=/Germany 16th-18th June (Roland)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Bolt through OR 5 slot |
Im still getting the final sign off for my Europa Classic. In Annex E(M) Final
inspection checklist on page 5 it says Check that the bolt through the slot in
OR 5 is 5mm (3/16) to 7mm (1/4) from the end of the slot when the outriggers
are down. My inspector wants to know which end of the slot is being referred
to? Is it to ensure the bolt has moved into the slot by 5mm to 7mm or that the
bolt is between 5mm and 7mm from contacting the more rearward end?
Once this is resolved I can send the paperwork off to the LAA.
Thanks,
--------
Phil B
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=469861#469861
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Bolt through OR 5 slot |
Phil,
The clearance relates to the distance between the shank of the bolt and the outboard
end of the slot in OR5.
When deploying the flaps, they move slightly beyond their resting position to enable
the down-latch to lock properly before the spring pulls it securely back
into the locked position. If the gap is less than specified there is a danger
that the outriggers wont lock down.
To understand the setup more clearly, go back and have another look at the build
manual CBM 9M 10 (page 10 of chapter 9) and read the paragraph Setting up
the Retraction Mechanism
Hope that helps
Nigel
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=469863#469863
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Europa fly-in Bad =?ISO-8859-1?Q?D=C3=BCrkheim?=/Germany |
16th-18th June
Hello,
attached you find the flyer of the OUV to the event with some additional informations
like program, accommodations etc. (unfortunately only in German).
The OUV representative assured me, that all foreign Europas are welcome as well,
and a couple of them have already announced their coming.
If you have any further questions, don't hesitate to ask.
I'm sure it's going to be a fun weekend :-)
See you in EDRF next week then :-)
Roland
PH-ZTI
XS TG 914
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=469870#469870
Attachments:
http://forums.matronics.com//files/ouv_treffen_edrf_newsletter_02_2017_2_150.pdf
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|